• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1507-1509
• /
• 1997

Property of insulation of electric machine is severely affected by process of electrical tree growing. Partial discharges(PD) have been used to determine degradation of insulations. In this paper, PD quantities detected and analyzed are PD magnitudes, repetition rates, phase angle distribution of PD pulses, and wavelet transformation. The wavelet transformation is an extended method of fourier transformation. The fourier transformation is a powerful tool for signal analysis, but it can't include informations for time. However the wavelet transformation analysis can include on the informations of time and frequencies at the same time. This paper discusses correlation between process of electrical tree growing and characteristics of PD in LDPE specimens.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2002년도 제7차 학술대회 초록집
• /
• pp.135-135
• /
• 2002

Purpose： To assess diagnostic accuracy of dynamic contrast enhanced MR mammography in differentiating between benign and malignant lesions. Materials and methods： Ninety-three patients with suspicious mammographic, sonographic or palpable findings underwent pre- or postoperative contrast-enhanced MR imaging of breast using three dimensional fast low-angle shot (3D FLASH) sequence (16/4 msec［repetition time / echo time］, 20 flip angle, 3mm slice thickness with no slice gap, 256 by 256 in-plane matrix) covering whole breasts. T1 weighted images were obtained before and after bolus administration of gadopentetate dimeglumine (0.15 mmol/kg). Subtraction images and time-signal intensity curves of region of interest were obtained sequentially and correlated with pathologic diagnoses of lesions.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.49-53
• /
• 1996

Corona discharges in air insulated electric power systems cause power loss, produce interfering electromagnetic radiation, and can indicate incipient failure. An understanding of corona discharges in air gap is clearly Important. The Wavelet transformation is an extended method of fourier transformation. The fourier method is a powerful tool for signal analysis, but it can't include information for time. However the wavelet transformation analysis can include on the information of time and frequencies at the same time. In this paper we apply the wavelet transformation to the corona signals in needle-plane air gap for the purpose of analysis of developing aspects of corona discharges. We analyzed the developing aspects of corona discharges, namely, corona discharge current, repetition rates, width of Pulse distribution region, pulseless region and frequencies distribution of corona discharge pulses.

• 로봇학회논문지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2019

Recently, smart factories have attracted much attention as a result of the 4th Industrial Revolution. Existing factory automation technologies are generally designed for simple repetition without using vision sensors. Even small object assemblies are still dependent on manual work. To satisfy the needs for replacing the existing system with new technology such as bin picking and visual servoing, precision and real-time application should be core. Therefore in our work we focused on the core elements by using deep learning algorithm to detect and classify the target object for real-time and analyzing the object features. We chose YOLO CNN which is capable of real-time working and combining the two tasks as mentioned above though there are lots of good deep learning algorithms such as Mask R-CNN and Fast R-CNN. Then through the line and inside features extracted from target object, we can obtain final outline and estimate object posture.

• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.289-297
• /
• 2021

We describe a comb-mode resolving spectroscopic technique by direct time-domain phase correction of unstable interferograms obtained from loosely locked two femtosecond lasers. A low-cost continuous wave laser and conventional repetition rate stabilization method were exploited for locking carrier and envelope phase of interferograms, respectively. We intentionally set the servo control at low bandwidth, resulting in severe interferograms' fluctuation to demonstrate the capability of the proposed correction method. The envelope phase of each interferogram was estimated by a quadratic fit of carrier peaks to correct timing fluctuation of interferograms in the time domain. After envelope phase correction on individual interferograms, we successfully demonstrated 1 Hz linewidth of RF comb-mode over 200 GHz optical spectral-bandwidth with 10-times signal-to-noise ratio (SNR) enhancement compared to the spectrum without correction. Besides, the group delay difference between two femtosecond pulses is successfully estimated through a linear slope of phase information.

• 생약학회지
• /
• 제38권2호통권149호
• /
• pp.128-132
• /
• 2007

We investigated the contents of crude saponin in the decoctions of Platycodi Radix prepared by the different extraction processes. Each lyophilized decoctions prepared by the different protocol were suspended in water and partitioned with ethylacetate (EtOAc) and n-butanol (BuOH), which gave the EtOAc fraction, BuOH fraction and the remaining water fraction, respectively. The content of crude saponin, which was estimated as the amount of BuOH fraction, and the HPLC profiles of the BuOH fraction were analyzed, and compared each others. The crude saponin content in the decoctions were increased proportionally to the increment of the extraction time, amount of water, extraction temperature and the number of repetition for extraction. Consequently, the optimized conditions were deduced to be suitable and recommendable for the preparation of Platycodi Radix ; the water amount needed for the extraction be 15-20 volumes to crude material, temperature for extraction be optimal at $85{\sim}100^{\circ}C$, extraction time be more than 5 hours and the repetition of extraction was 2 times.

• 인지과학
• /
• 제15권2호
• /
• pp.17-22
• /
• 2004

순간 노출된 형태의 판단 과제에서 균질 연결성의 효과를 체계적으로 검증하기 위해 두실험이 수행되었다. 상하로 연결되거나 분리되어 배치된 두 괄호의 정체 판단에서 관찰된 부적 반복효과가 분리된 자극판을 예상하는 지각 태세에 기인할 가능성(실험 1)과 반응 편중 및 짧은 노출시간에 기인할 가능성(실험 2)을 검토하였다. 실험 1은, 연결된 자극판만을 사용하여, 도형의 한 부분으로 지시된 표적만을 보고하는 조건과 전체 도형을 보고하는 조건 모두에서 부적 반복효과를 관찰하였다. 실험 2는, 노출시간을 늘여 정확 보고율을 높이는 동시에, 애매한 도형을 이용하여 반응 편중의 정도를 계산하였는데, 반응 편중 효과의 제거 후에도 여전히 부적 반복효과를 관찰하였다. 본 연구의 결과는, 과제의 요구가 없어도 균질 연결된 형태들이 분석적으로 처리될 수 있음을 가리키며, 나아가 균질 연결성이 지각 조직화의 원리라는 가설을 부정하는 것으로 보인다.

• 한국전문물리치료학회지
• /
• 제2권1호
• /
• pp.51-61
• /
• 1995

In general, research in isokinetic exercise has focussed on studies of peak torque. However, peak torque is not always sufficient to assess the real amount of motion or to determine endurance. In this study, the subjects were 54 healthy students who performed continuous maximal isokinetic knee flexion and extension until their total work per time reached 50% of their maximal total work. Isokinetic curves were then plotted. Total work sums, exercise durations in seconds, and the numbers of repetitions were compared with reference to subject gender, angular velocity and muscle group. The relationship between total work sum, duration and number of repetition and thigh circumference plus leg length was computed. In addition, the characteristics of total work per second and total work per time were calculated. Results showed the total work sums differed greatly from muscle group to muscle group and with different angular velocities. The duration in seconds and the numbers of repetition differed only at higher angular velocity. Males achieved higher levels in every category except for some duration in seconds and some numbers of repetitions. Thigh circumference and leg length were deciding fators in every case, but duration in seconds and number of repetitions were not. These results suggest that measures of endurance should be included along with measures of total work when isokinetic studies are done. Measures of endurance in seconds are more accurate when isokinetic exercise is performed at lower angular velocities and numbers of repetitions at higher angular velocities.

• 대한전자공학회논문지SD
• /
• 제43권11호
• /
• pp.14-18
• /
• 2006

광간섭계는 물체의 기하학적 구조 및 의료 계측등 다양한 분야의 광계측에서 매우 일반적으로 사용된다. 이러한 광간섭계에서 광지연단은 측정대상의 기준을 위해 사용되고. 광간섭계의 계측속도는 광지연단에 의해 제한된다. 본 논문에서는 고속 광지연단을 위해 기존의 기계적 방식을 배제하고, 광학적 방식의 광 간섭계를 구성하였다. 고속 광간섭계의 구성은 1304nm의 10GHz광원을 이용하였으며, 광지연단으로 광위상변조기와 광섬유를 이용하여 안정적이고 고속의 광 간섭계를 구성하였다. 구성된 광간섭계는 광위상변조기의 변조전압, 변조주파수에 의해 광지연시간을 가변할 수 있으며, 10MHz 반복율에 대해 11ps의 광지연시간을 얻을 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.192-198
• /
• 2000

Three dimensional thermal cycle analysis of the plunger is carried out in repeated forming process of the TV glass, which is continued work of two dimensional analysis where an efficient method has been proposed. The plunger undergoes temperature fluctuation during a cycle due to the repeated contact and separation from the glass, which attains a cyclic steady state having same temperature history at every cycle. Straightforward analysis of this problem brings about more than 90 cycles to get reasonable solution. An exponential function fitting method is proposed, which finds exponential function to best approximate temperature values of 3 consecutive cycles, and new cycle is restarted with the fitted value at infinite time. Number of cases are analyzed using the proposed method and compared to the result of straightforward repetition, from which one finds that the method always reaches nearly convergent solution within $9{\sim}12$ cycles, but turns around afterwards without further convergence. Two step use is found most efficient, in which the exponential fitting is carried out fer the first 12 cycles, followed by simple repetition, which shows fast convergence expending only 6 additional cycles to get the accuracy within 2 error. This reduces the computation cycle remarkably from 90 to 18, which is 80% reduction. From the parametric studies, one reveals that the overall thermal behavior of the plunger in terms of cooling parameters and time is similar to that of 2 dimensional analysis.