• The Korean Journal of Community Living Science
• /
• v.22 no.4
• /
• pp.615-621
• /
• 2011

This study was conducted to evaluate of the protection efficiency in each part of developed pesticide-proof clothes by repeated washings. We investigated the effect of repeated laundering on mechanical properties of pesticide-proof clothes (not washed vs 5 times washed). We also examined pesticide infiltration rate into the pesticide-proof clothes by repeated laundering. The patches(TCL paper, surface area 50cm2)were attached to the inside of pesticide-proof clothes(head, chest, right upper-arm, right forearm, left thigh, left calf, back) which subjects had dressed in during pesticide spraying. The patches were detached from working clothes after work. For the extraction of pesticide in pesticide-proof clothes, sonication was applied for 30 min with methanol. The gas chromatography/mass spectrometry (GC/MS) was applied to identify the pesticide component. The results of this study are as follows: The force strength, water-vapour resistance and surface wetting resistance of pesticide-proof clothes decreased 5 times more in washed clothes. The concentration of pesticide was the highest in the head area of pesticide-proof clothes. In seven parts of TLC paper attached to the pesticide proof clothes, the concentration of pesticide was higher in the left thigh. The penetration part and concentration of pesticide increased as washing was repeated. Therefore the conclusion which can be drawn from this study is this: protection efficiency of pesticide-proof clothes decrease by repeated washings.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.11
• /
• pp.626-633
• /
• 2017

The present study investigated the effect of a water-washing process, which is part of the acid hydrometallurgical process for recovery of high purity of zinc, on the removal of alkali metals and chlorides (Na, K, Ca, Cl) from Electric arc furnace dust (EAFD). Two EAFD samples with different properties were characterized by particle size, XRD and element analysis, and their washing efficiencies (%) on alkali metals and chlorides were compared according to pH, washing time, liquid to solid (L/S) ratio and number of washings. The results show that the alkali metals and chlorides could be effectively removed by the washing (at L/S ration of 3 for more than 30 min., pH 10~11) while minimizing loss of zinc (<0.1%), in which the washing efficiency was Na-78%, K-76%, Cl >99%, respectively. Na and K could be removed up to 97% and 89% respectively by 3 times of repeated washings. With increased sample volume (10 times) of the mixed (1:1, w/w) sample with two types of EAFD, it was confirmed that the pH(10~11) can be used as the main process control parameter for the washing of the alkali metals regardless of EAFD properties.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.5
• /
• pp.737-744
• /
• 1999

Underwear made of plain and 1$\times$1 rib-knit cotton fabric were laundered to evaluate the change of the size and the tensile properties. For laundering pulsator and drum washers were used. After 30 washing cycles the amount of shrinkage and the extension were different with washer types. Underwear laundered by the drum type was shrunken in the neck line armhole line and hem line were extended and the bodice width and side length were shrunken,. Tensile strength of the knitted fabric was not decreased through repeated washings because the fabric density was increased. But it was confirmed by SEM that the surface of the fiber was damaged by washings.

• Journal of Food Hygiene and Safety
• /
• v.8 no.4
• /
• pp.241-249
• /
• 1993

This study was performed to investigate the remainity of synthetic surfactant (LAS) by HPLC and the microbial contamination on stainless steel dishes. For the maintenance and the improvement of school lunch program's safety, the remainity of synthetic surfactants (LAS) on stainless steel dishes washed with auto dishwasher was investigated by HPLC, and the microbial contamination on same dishes was surveyed. The results were as follows: (1) The remainity of synthetic surfactant (LAS) a) The residue of LAS was very small because of the repeated washing of dishes by strong pressurized water. b) The remainity range of LAS on stainless steel dishes was 2.1~7.2 $\mu\textrm{g}$/dish. The remainity of general surfactants was higher in cold water then warm water. The amount of residual general surfatants was 5.95 $\mu\textrm{g}$/dish in cold water, and 2.95 $\mu\textrm{g}$/dish in warm water. There was no difference of the remainity of special surfactants by water temperature. The amount of residual surfactants was 3.9 $\mu\textrm{g}$/dish. c) There was no difference of residue amount by washing times. (2) The microbial contamination after washing with general surfactants. 1) The mean MPN of E. coli was 203(53~345) on 1 hr, 19(6~28) on 2 hrs, in cold water, and 1100(only 1 dish of 1 school) on 1 hr, 24(6~42) on 2hrs. 2) After washing with general surgactants the mean of contamination by general microbials was 956(25~2300)on 1 hr, 694(45~2500) on 2 hrs. in cold water and 803(5~2300) on 1 hr, 671(5~2500)on 2 hrs. After washing with special surfactants the mean of contamination by general microbials was 788(136~2900) on 1 hr, 1122(15~3000) on 2 hrs, in cold water and 537(5~2000) on 1 hr, 88(15~150) on 2 hrs in warm water. (3) Like the results of this study, the good washing methods of stainless steel dishes for school luch program were as follows. First, for washing stainless steel dishes, the use of special surfactants was recommended at 30~4$0^{\circ}C$ water. Second, at 7$0^{\circ}C$ water, the rinsing of dishes was recommended. Third, the final rinsing at 8$0^{\circ}C$ combined with simple disinfection and dry was recommended.

• Korean Journal of Human Ecology
• /
• v.3 no.1
• /
• pp.51-63
• /
• 2000

The purpose of this study was to identify the best dyeing conditions using onion's outer shell. and to apply to the method in practical daily life. To do this. we extracted quercetin from onion's outer shell and dyed several natural fabrics such as cotton, slack mercerized cotton, ramie. and silk. under the different conditions. Dyed fabrics were Investigated in the aspect of dyeability and colorfastness. The effective conditions for the light-fastness and washing-fastness also have been studied. The results of the experiment were varied with such conditions as temperature. time. pH degree. and treatment and types of mordants. The results are as follows ; 1. Fabrics dyed with onion's outer shell showed excellent dyeability even though there were no mordants, and the silk fabric dyed better than both cotton and ramie fabric. Furthermore, in the cases of repeated dyeing and treatment of mordants using AIK(SO$_4$)$_2$.12$H_2O$ and CuSO$_4$,.5$H_2O$ dyeability of specimen had been improved 2. Cellulose fabrics such as cotton, mercerized cotton and ramie showed the best dyeability under relatively low temperature in the range of 20~4$0^{\circ}C$. On the contrary to cellulose fabric, silk fabric showed the best dyeability under higher dyeing temperature. All fabrics had the higest K/S value at pH 3 regardless of the kind of fiber 3. Dyeing colors varied with the kind of mordants. Colors were turned into yellow in AIK(SO$_4$)$_2$.12$H_2O$ into Yellow-red in CuSO$_4$,.5$H_2O$ , and into green-Yellow in FeSO$_4$.7$H_2O$. As mordants, AIK(SO$_4$)$_2$.12$H_2O$, CuSO$_4$,. 5$H_2O$. FeSO$_4$.7$H_2O$. gallic acid and tartaric acid were used and especially AIK(SO$_4$)$_2$.12$H_2O$ showed the best dyeability and colorfastness in repeated dyeing. Mordants such as AIK(SO$_4$)$_2$.12$H_2O$ made fabrics have better chroma and washing-fastness though the light-fastness was poorer than non mordanting. 4. Repeated dyeing brought us deep color. When fresh dyebath was used each time, the dyeability was increased as the experiment was repeated more. When dyed with used dyebath several times, improved dyeability could not be expected. The optimal using times of the used dyebath was twice.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.6
• /
• pp.817-825
• /
• 1999

Background : Forceps biopsy, bronchial brushing, and bronchial washing are used in conjunction with bronchoscopy to provide specimens for histologic and cytologic analysis in patients with suspected lung cancer. This study was performed to evaluate how many times brushing should be done and how much fluid should be used during bronchial washing for increasing diagnostic yield, and to evaluate which combination of these procedures gives the highest diagnostic yield. Methods : Forty patients, with suspected lung cancer, who had bronchoscopically visible lesions were enrolled in this prospective study. During one bronchoscopic examination four forceps biopsies, four bronchial brushings, and bronchial washing were done in all patients. The patients were divided into four groups by the amount of normal saline used for bronchial washing; group I, 10 ml ; group II, 20ml ; group III 30ml, and group IV, 40ml. We analyzed the results in 36 patients confirmed as lung cancer. Results : The diagnostic sensitivity of bronchial washing before and after forceps biopsy and bronchial brushing were 36% and 28%, respectively. The cumulative diagnostic sensitivity of bronchial washing was 47% and significantly higher than that of bronchial washing before or after forceps biopsy and bronchial brushing (p<0.05). The diagnostic sensitivity of bronchial washing with saline of 30ml was significantly higher than that of bronchial washing with saline of 10ml or 20ml (p<0.05). The diagnostic sensitivity of the first brushing was 75%, the second brushing 78%, the third brushing 83%, and the fourth brushing 67%. With repeated brushing up to three times, the diagnostic sensitivity increased to 92% (p<0.05). However, inclusion of the fourth brushing did not give a further increase of the diagnostic sensitivity. The diagnostic sensitivity of forceps biopsy was 86%. The diagnostic sensitivities of forceps biopsy by the type of bronchial lesion were as follows: tumor, 88%; infiltration, 67%; infiltration with nodularity, 80%; and collapse, 100%. The combination of forceps biopsy and bronchial washing gave a diagnostic sensitivity of 89%. The diagnostic sensitivity of combining forceps biopsy with bronchial brushing was 97%. Addition of bronchial washing did not increase the diagnostic yield over forceps biopsy and bronchial brushing. Conclusion : In patients with central lung cancer, forceps biopsies and repeated brushings up to three times should be done for maximal diagnostic yield.

• Economic and Environmental Geology
• /
• v.52 no.1
• /
• pp.1-12
• /
• 2019

Batch experiments for the soil washing coupled with the magnetic separation process were performed to remediate the soil contaminated with metal and oil wastes. The soil was seriously contaminated by Zn and TPH (total petroleum hydrocarbon), of which concentrations were 1743.3 mg/kg and 3558.9 mg/kg, respectively, and initial concentrations of Zn, Pb, Cu, and TPH were higher than the 2nd SPWL (soil pollution warning limit: remediation goal). The soil washing with acidic solution was performed to remove heavy metals from the soil, but Pb and Zn concentration of the soil maintained higher than the 2nd SWPL even after the soil washing with acidic solution. The 2nd soil washing was repeated to increase the Pb and Zn removal efficiency and the Zn and Pb removal efficiencies additionally increased by only 8 % and 5 %, respectively, by the 2nd soil washing (> 2nd SPWL). The small particle separation from the soil was conducted to decrease the initial concentration of heavy metals and to increase the washing effectiveness before the soil washing and 4.1 % of the soil were separated as small particles (< 0.075 mm in diameter). The small particle separation lowered down Zn and Pb concentrations of soil to 1256.3 mg/kg (27.9 % decrease) and 325.8 mg/kg (56.3 % decrease). However, the Zn concentration of soil without small particles still was higher than the 2nd SPWL even after the soil washing, suggesting that the additional process is necessary to lower Zn concentration to below the 2nd SPWL after the treatment process. As an alternative process, the magnetic separation process was performed for the soil and 16.4 % of soil mass were removed, because the soil contamination was originated from unreasonable dumping of metal wastes. The Zn and Pb concentrations of soil were lowered down to 637.2 mg/kg (63.4 % decrease) and 139.6 mg/kg (81.5 % decrease) by the magnetic separation, which were much higher than the removal efficiency of the soil washing and the particle separation. The 1st soil washing after the magnetic separation lowered concentration of both TPH and heavy metals to below 2nd SPWL, suggesting that the soil washing conjugated with the magnetic separation can be applied for the heavy metal and TPH contaminated soil including high content of metal wastes.

• Textile Coloration and Finishing
• /
• v.14 no.3
• /
• pp.44-52
• /
• 2002

Recently there has been a growing interest in the use of natural dyes in textile applications. Natural dyes can exhibit better biodegradability and generally have a higher compatibility with the environment. In this study, the colorants of Catalpa ovata bark were extracted with water and analyzed by spectrophotometry for their main colorant species. Cotton, silk and wool fabrics have been dyed with aqueous extract of Catalpa ovata bark and their dyeabilities on the fibers were studied. Additionally the fastness to washing, drycleaning and light, and the effects on bacteriostatic rate and UV-B protection rate were also investigated. The major colorant of the extract of Catalpa ovata bark was shown to be 6-O-trans-caffeoyl-$\beta$-D-glucopyranoside. Cotton, silk and wool fabrics dyed with the extract of Catnip ovata bark were colored in yellowish red tint. The optimum dyeing condition of the colorants extracted from Catalp ovata bark was three repeated dyeing at $95^\circ{C}$ for 1 hr using post mordanting. For dyed silk and wool fabric, the fastness to washing were improved by mordanting, and the fastness to drycleaning were very outstanding. In case of wool fabric dyed with the extract of Catalpa ovata bark, the bacteriostatic rate was increased drastically by 98.0%, and UV-B protection rate was increased by 97.3%.

• Korean Journal of Human Ecology
• /
• v.10 no.3
• /
• pp.263-274
• /
• 2001

This study investigated the dyeability on silk, wool and rotten fabrics dyed with Magnolia liliflora leafs. In addition, the fastness of washing, perspiration, rubbing, drycleaning and the effects of its pigment on bacterial reduction and uv-B protection were also investigated. The results were as follows : It was found that uv-visible absorption spectrum showed two strong absorption peaks in the range of $250{\sim}340nm$. The optimum dyeing condition of the pigments extracted from the Magnolia liliflora leafs was dyeing with 0.5% mordants and three repeated dyeing at $95^{\circ}C$ for 1hr. When the wool fabric was dyed with Magnolia liliflora leaf, dyeing properties was the best among the three fabrics. Washing fastness of dyed fabrics was very low, drycleaning fastness was good and the other fastness were good. Light fastness of three fabrics dyed by Magnolia liliflora leafs increased by mordant treatment, especially copper sulfate treatment. The bacterial reduction and uv-B protection of dyed wool fabric with Magnolia liliflora leafs also increased.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.29-38
• /
• 2009

Natural dyes seem to be more profitable on human and environment, and recently they could be considered as a better alternative to synthesized dyes. The aim of the current work was to investigate the dyeing property and antimicrobial activity of commercial cotton fabrics dyed with kumazasa (usually called in japan) which is known as conventional japan bamboo leaves. Actually, the dyeability and antimicrobial property of dyed fabric with natural mordant/dyeing was compared with synthetic mordant/dye process. The results of this study obtained are as follows. The apparently colour of kumazasa leaves extract dyed fabrics showed with light green or slightly yellow-green. In colorfastness to washing, ${\Delta}E$ and K/S values of dyed fabrics with natural chitosan as mordant used was shown to be more excellent results, than was synthetic mordant used. However, the decrease rate was recorded nearly 50% when washing repeated 20 cycles. In result of antimicrobial effect for bacteria, the dyed fabrics didn't show the significant antimicrobial activity to the both dyed with and without mordant. Results of this investigation considered that low-cost, natural, bio-mordant are relatively effective in natural coloration.