• Journal of KIISE:Software and Applications
• /
• v.35 no.2
• /
• pp.128-136
• /
• 2008

Recognition of parallel structure at early stage of sentence parsing can reduce the complexity of parsing. In this paper, we propose an unsupervised language-independent probabilistic model for recongition of parallel noun structures. The proposed model is based on the idea of swapping constituents, which replies the properties of symmetry (two or more identical constituents are repeated) and of reversibility (the order of constituents is inter-changeable) in parallel structures. The non-symmetric patterns that cannot be captured by the general symmetry rule are resolved additionally by the modifier information. In particular this paper shows how the proposed model is applied to recognize Korean parallel noun phrases connected by "wa/kwa" particle. Our model is compared with other models including supervised models and performs better on recongition of parallel noun phrases.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.47-50
• /
• 2008

Streamer resistivity surveys in shallow marine environments were carried out to analyze sediment characteristics at the bottom of reservoir. Because the resistivity values of reservoir water are very low and those of sediment are relatively high, apparent resistivity values increase with depth. And it is necessary to eliminate the apparent resistivity data decreased highly when the number of separation increases. According to the repeated data processing, we proposed the resistivity ratio of upper-to-lower layer is $0.6{\sim}0.8$ because the RMS error of inversion leads to the minimum in these range. As a result of the inversion for two- and three-layer model, the inversion including water depth is proved to be more effective than conventional method.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.14-20
• /
• 2018

Wet clutches in an automatic transmission enable the transmission of the engine power by the frictional torque experienced and noted between disk and plates. Since the clutch frictional torque considerably affects the shift quality of an automatic transmission as well as the durability of the machinery, its friction characteristics must be carefully examined to meet the design requirements. The SAE No. 2 friction test machine is a well-known standard to evaluate mainly the friction characteristics of plate clutches along with the required automatic transmission fluids. This paper reviews the experimental analysis of the wet clutch friction characteristics by using the exclusively developed clutch test machine which is capable of controlling the clutch test procedure, in accordance with the applicable test standard and processing of the experimental data automatically. As the clutch test machine is designed for the accommodation of dual clutches which is applied to the real transmission, it can evaluate not only the clutch friction characteristics, but also an actuation performance of a measured clutch piston. In respect to friction characteristics involving dynamic friction coefficients, the energy absorbed in a clutch disk and the recorded temperatures of clutch plates during braking actions and procedures are also investigated. Additionally, the change of friction coefficients by the use of the repeated clutch application is also observed with the endurance test functions of an accurately calibrated and dedicated clutch test machine.

• Journal of Korean Society of Archives and Records Management
• /
• v.17 no.4
• /
• pp.127-154
• /
• 2017

Large-scale and complex disasters have frequently occurred all over the world recently, and they are repeated every year. Accordingly, the need for the systematic management and utilization of raw-data and processing information in the past has increased. For this purpose, this study proposed a construction strategy for disaster and safety record information resources archives based on automatic acquisition, which can be used as a hub for disaster and safety information. Based on local and foreign case studies, several consideration factors for building the archives are determined. Finally, this study proposed four steps for constructing the archives. These are as follows: 1) complete enumeration survey of the disaster and safety record information resources, 2) automatic acquisition possibility study, 3) selection of the resources for preservation, and 4) automatic acquisition of metadata. The construction of the archives proposed in this study will facilitate integrated management, sharing, and use of scattered information resources on disaster and safety.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1524-1531
• /
• 2004

This study analyzes a load balancing technique using Round Robin Algorithm. The study uses two software packages (Packet Capture and Round Robin Test Package) to check packet volume from Virtual Network structure (data generator, virtual server, Server1,2,3), and finds out traffic distribution toward Server1,2 and 3. The functions of implemented Round Robin Load Balancing Monitoring System include round robin testing, system monitoring, and graphical indication of data transmission and packet volume. As the result of the study shows, Round Robin Algorithm allows servers to ensure definite traffic distribution, unless incoming data loads differ much. Although error levels are high in some cases, they were eventually alleviated by repeated tests for a long period of time.

• The KIPS Transactions:PartB
• /
• v.8B no.6
• /
• pp.595-600
• /
• 2001

Recently, WBI model which is based on web has been proposed in the part of the new activity model of teaching-learning. The demand for the customized coursewares which is required from the learners is increased, the needs of the efficient and automated education agents in the web-based instruction are recognized. But many education systems that had been studied recently did not service fluently the courses which learners had been wanting and could not provide the way for the learners to study the learning weakness which is observed in the continuous feedback of the course. In this paper we propose design of multi-agent system for course scheduling of learner-oriented using weakness analysis algorithm. First, proposed system monitors learner's behaviors constantly, evaluates them, and calculates his accomplishment. From this accomplishment, the multi-agent schedules the suitable course for the learner. The learner achieves an active and complete learning from the repeated and suitable course.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.3
• /
• pp.81-86
• /
• 2014

According to the development of streaming services with P2P and mobile network technologies, researches to enhance the service quality in mobile environment have been proposed. However, streaming services considering high-speed mobile environment and characteristics of heterogenous terminals have been hindered from being provided with the required quality from user because of bandwidth congestion between selfish peers of existing P2P system. It is also prone to long delay and loss in accordance with the repeated traffic amounts because there are no optimized solution for traffic localization. The structure to enhance peer contribution for service differentiation and peer selection with clustering scheme with location information of terminal can satisfy both users and service providers with service quality and efficiency. In this paper, we propose an incentive mechanism and resource distribution scheme with user contribution and traffic cost information based on user location, which make mobile users increase the satisfaction of service quality in LTE environments.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.103-112
• /
• 2020

In Korea, local government officials are in charge of buildings, and as such are supposed to review submitted documents related to the architectural administration to ensure that they comply with the legal standards. However, these officials generally put a greater emphasis on the preparation of the set of documents required for the administrative work than the content the documents contain. For this reason, many experts point out that the shortage of officials specialized in buildings and construction, as well as the lack of expertise among the building officials in the local governments, may result in repeated safety accidents during building construction. The purpose of this study is to propose the operational direction of a Regional Building Safety (RBS) center to secure the performance and safety of buildings by utilizing private resources. In this study, we carried out a pilot project to verify the effects of an RBS center and to derive the specific number of experts required. As a result, the technical matters were resolved in approximately 15% of the total cases of the document processing procedure, and the level of technical specialization among the officers has also been improved through the provision of guidance. The research findings support the validity and effects of the introduction of the RBS center. Finally, this study proposes (1) the types of RBS Centers that should be established, (2) the roles and business scope of the RBS Center, (3) the specific number of experts required, (4) the qualifications of the experts, and (5) the business regulations of the RBS Center.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.203-213
• /
• 2011

Time-lapse seismic surveys make repeated seismic surveys at different stages of oil production of a hydrocarbon reservoir to monitor changes in reservoir like fluid saturation. Since the repeatable surface seismic measurements can identify fluid types and map fluid saturations, oil and gas companies can make much more informed decision during not only production but also drilling and development. If time-lapse seismic surveys compare 3D seismic surveys, the time-lapse surveys are widely called as 4D seismic. A meaningful time-lapse interpretation is based on the repeatability of seismic surveys, which mainly depends on improved positioning and reduced noise (if surveys were designed properly through a feasibility study). The time-lapse interpretation can help oil and gas companies to maximize oil and gas recovery. This paper discusses about time-lapse seismic surveys mainly focused on feasibility, repeatability, data processing and interpretation.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.6 no.1
• /
• pp.179-213
• /
• 1984

The history of recording and conserving for maintenance the human's memory from ancient times to modern's has brought about a lot of changing process of the recorded information media with developing in culture, and each society has made important recorded materials in his library as essentially the social apparatus. But most of them that were damaged by factors of the natural disaster, humidity, temperature, light, fungi and insects in the library, and were resulted in deterioration and losing the numerous materials. For removing the inevitable phases repeated, there are studying for counterplan of the fundamental environment factors about preservation, restoration and chemical research of materials in advanced countries, but I get a few researches about protecting the cultural properties. Therefore I research the survey of the actual conditions on 72 university libraries centering around them, and then I have researched the collection rate 81 percent, 58 university libraries. (local : 35, in seoul : 23) As the result of this research, I propose the model of the environment factors of conserving the library materials. 1) To apply the equipment of processing the radiant energy to the new construction and buildings. 2) To remove factors that occur fungi and insects by facilities being controlled relative humility, temperature, and to equip the ventilation arrangement in the library. 3) To shelve all acquired and bound materials after proceeding the vacuum fumigator. 4) Those who want to enter into the library stack were surely taken in sterilzing their hands and shoes, and must put on the gown. 5) To use the vacuum dusting thing (machine) for removing the dust without spreading out the floor of the library at any time. 6) To set up the gas automatic fire extinguisher worked by smoke sensor. 7) To assist the research into the preservation, natures and environment of recorded materials, and to supply financial funds for librarian. 8) To hold regularly the workshop be able to educate the methods of preservation materials by the constant system. (Library Association) 9) To add to responsibilities on certification of preservation materials for librarian. 10) To hold the constant committee system in each library. 11) To keep up with the ideal environment (humidity, temperature, light, ventilation, etc.) of preservation materials in the arrangement room, and to put on the gown.