• 한국해양공학회지
• /
• 제2권1호
• /
• pp.95-105
• /
• 1988

This paper describes the development of a reliability-based optimum design technique for such three dimensional tubular frames as off shore structures. The objective function is formulated for the structural weight. Constraints that probability of failure for the critical sections does not exceed the allowable probability of failure are set up. In the evaluation of the probability of failure, fatigue as well as buckling and plasticity failure are taken into account and the mean-value first-order second-moment method(MVFOSM) is applied for its calculation. In order to reduce the computing time required for the repeated structural analysis in the optimization process, reanalysis method is also applied. Application to two and three dimensional simple frame structures is performed. The influence of material properties, external forces, allowable failure probabilities and interaction between external forces on the optimum design is investigated.

• Child Health Nursing Research
• /
• 제5권3호
• /
• pp.305-317
• /
• 1999

To understand and identity the meaning of sexuality in middle school girls and boys, the qualitative research was done. We made the in-depth unstructured interviews with 33 participants form July to October 1998. We analyzed the data according to the Collaizzi's phenomenological method. After repeated reading and interpretation of data, 15 themes and 7 basic structures were deducted. Followings were 7 basic structures: Physical touch and exposure. relationship with male and female, difference between male and female natural and inevitable life process, something should be hidden. interest and abstinence, and female as victim. According to above results, we would like to propose followings on the sexuality of middle school students : First, the research on the meaning of sexuality of high school and university students should be followed-up. Second. the measuring tool of sexual behaviour of the middle school students should be developed including the contents of 15 themes and 7 basic structures of this study.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.469-472
• /
• 2008

In general, structures in service gradually lose original performance according to time due to initial defects in design and construction, or exposure to unfavorable external conditions such as repeated loading or deteriorating environment, and in extreme cases, may collapse in large disaster. Therefore, in order to maintain the serviceability of structures at optimal level, advanced structure measuring system which can inform optimal time point and method of maintenance is required in addition to accurate prediction of residual life the structure by periodic inspection. To guarantee the safety level of bridge structure and to prevent from disaster, the integration of safety network for bridge structures are needed. Therefore in this study, to enhance the effectiveness of safety network for bridge, the connection methodologies between safety network and pre-installed bridge monitoring system are investigated.

• 한국공간구조학회논문집
• /
• 제23권4호
• /
• pp.89-96
• /
• 2023

The seismic retrofits of existing structures have been focused on the control of structural responses which can be achieved by providing displacement capacity through inelastic ductile action at supplemental devices. Due to their hysteretic characteristics, it is expected to sustain damage through repeated inelastic behaviors including residual deformation which might increase repair costs. To solve such drawbacks of existing yielding devices, this study proposes a self-centering disc spring brace that sustains large axial deformation without structural damage while providing stable energy dissipation capacity. The hysteretic behaviors of suggested brace are first investigated based on the quasi-static cyclic test procedure. Experimental results present the effective self-centering behavior and an analytical model is then suggested in order to reasonably capture the flag-shaped hysteretic behavior of the disc spring brace.

• 응용통계연구
• /
• 제26권5호
• /
• pp.697-712
• /
• 2013

다시점 자료 연구에서 일반화추정방정식은 가상관행렬을 잘못 가정하더라도 모수의 일치추정량을 도출하므로 많이 이용된다. 하지만, 결측 체계가 완전임의결측이 아닌 경우에는 편의추정량을 제공하고, 시간-종속적 공변량이 포함된 경우에는 가상관행렬에 따라 회귀계수 추정값이 다르게 도출될 수 있는 문제점이 있다. 결측 체계가 임의결측인 경우에 발생하는 문제를 해결하기 위해 가중 방법과 다중대체 방법을 사용하는 것이 제안되었다. 본 논문에서는 시간-종속적 공변량이 포함된 이분형 반복측정자료를 GEE를 이용하여 분석할 때 다양한 결측 체계에서 일반화추정방정식 방법, 가중 방법, 다중대체 방법의 회귀계수 추정에 대한 로버스트성과 정확성을 모의실험을 통하여 비교해 보았다. 세 가지 방법 모두에서 시간-종속적 공변량의 회귀계수가 시간-독립적 공변량의 회귀계수에 비해 가상관행렬에 따라 추정값의 차이가 크게 나타났다. 다른 두 방법에 비해 다중대체 방법이 가상관행렬의 형태에 대해 더 로버스트하고 편의도 작은 추정치를 도출하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.105-110
• /
• 2001

Autoclave curing using the vacuum bagging method is widely used for the manufacture of advanced composite prepreg airframe structures. Due to increasing use of advanced composites, specific techniques have been developed to repair damaged composite structures. In order to repair the damaged part, it is required that the damaged areas be removed, such as skin and/or honeycomb core, by utilizing the proper method and then repairing the area by laying up prepreg (and core) then curing under vacuum using the vacuum bagging materials. It shall be cured either in an oven or autoclave per the original specification requirements. Delamination can be observed in the sound areas during and/or after a couple times exposure to the elevated curing temperature due to the repeated repair condition. This study was conducted for checking the degree of degradation of properties of the cured parts and delamination between skin prepreg and honeycomb core. Specimens with glass honeycomb sandwich construction and glass/epoxy prepreg were prepared. The specimens were cured 1 to 5 times at $260^{circ}F$ in an autoclave and each additionally exposed 50, 100 and 150 hours in the $260^{circ}F$ oven. Each specimen was tested for tensile strength, compressive strength, flatwise tensile strength and interlaminar shear strength. To monitor the characteristics of the resin itself, the cured resin was tested using DMA and DSC. As a results, the decrease of Tg value were observed in the specific specimen which is exposed over 50 hrs at $260^{circ}F$. This means the change or degradative of resin properties is also related to the decrease of flatwise tensile properties. Accordingly, minimal exposure on the curing temperature is recommended for parts in order to prevent the delation and maintain the better condition.

• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.611-621
• /
• 2019

Precast concrete structure has many advantages, but the assembled seam will affect potentially the overall seismic performance of structure. Based on the sidewall joint located in the bottom of assembled monolithic subway station, the main objectives of this study are, on one hand to present an experimental campaign on the seismic behavior of precast sidewall joint (PWJ) and cast-in-place sidewall joint (CWJ) subjected to low-cycle repeated loading, and on the other hand to explore the effect of shape and position of assembled seam on load carrying capacity and crack width of precast sidewall joint. Two full-scale specimens were designed and tested. The important index of failure pattern, loading carrying capacity, deformation performance and crack width were evaluated and compared. Based on the test results, a series of different height and variably-shape of assembled seam of precast sidewall joint were considered. The test and numerical investigations indicate that, (1) the carrying capacity and deformation capacity of precast sidewall and cast-in-place sidewall were very similar, but the crack failure pattern, bending deformation and shearing deformation in the plastic hinge zone were different obviously; (2) the influence of the assembled seam should be considered when precast underground structures located in the aquifer water-bearing stratum; (3) the optimal assembled seam shape and position can be suggested for the design of precast underground concrete structures according to the analysis results.

• 한국지반신소재학회논문집
• /
• 제20권4호
• /
• pp.105-112
• /
• 2021

항만구조물의 경우 정적인 하중 뿐만 아니라 파압과 같이 반복적인 하중을 받는 구조물임에 따라 반복적인 하중을 받는 구조물의 특성을 파악하는 것이 중요하다. 따라서 본 연구는 반복 수평하중에 의한 말뚝으로 보강된 블록식 방파제의 거동특성을 실내모형실험을 통해 구하였다. 말뚝의 근입 깊이가 깊어질수록 수평저항력이 증가하는 경향이 나타났으며, 하중이 반복될수록 수평저항력의 기울기는 점차 완만하게 나타났다. 휨모멘트는 후열말뚝이 전열말뚝보다 크게 나타났다. 지반내에서의 말뚝의 휨모멘트는 Broms(1964)의 사질토지반에서 말뚝두부 자유일 때와 유사하게 나타났다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권9호
• /
• pp.1291-1295
• /
• 2004

Histology and transmission electron microscopy studies were carried out on buffalo muscles that were subjected to repeated freeze-thaw cycles at -10 and $-18^{\circ}C$. In the first freeze thaw cycle ($-10^{\circ}C$) structures of muscle showed slight change and closely resembled to those of normal muscle. There were frequent gaps in the half way across the fibres and some cracks in individual fibre were also noticed in second freeze thaw cycle. In the muscle frozen at $-18^{\circ}C$, more pronounced shrinkage with extensive damage of fibres with tearing was observed. The interfibrillar gaps were wider, shrinkage and tearing of the fibres were more distinct after second freeze-thaw cycle. After the second cycle, the interior portion showed large scale degradation of the ultrastructure. Our studies of buffalo muscle showed that under the proper condition, little structural damage takes place in the meat histology and ultrastructure under repeated freeze-thaw conditions. This study adds continued weight to the evidence that limited freeze-thaw cycles will not deteriorate the quality of meat.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.251-258
• /
• 2008

The use of reinforced earth walls in permanent structures is getting it's popularity. Despite a number of advantages of reinforced earth walls over conventional concrete retaining walls, there exit concerns over long-term residual deformation when subjected to repeated and/or cyclic loads, during their service period. In this investigation, the effect of preloading in reducing long term residiual deformation of back-to-back reinforced soil wall under sustained and/or repeated loading enviormentment using a series of reduced-scale model tests. It is found that the preloading technique can be an effective means of controlling residual deformations of reinforced soils under varisous loading conditions.