• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.809-812
• /
• 2004

(Pb,Sr)TiO3 (PST) thin films were fabricated by using the alkoxide-based sol-gel method. The PST stock solution was made and then spin-coated onto a PUTi/SiO2/Si substrate. The coating and drying procedures were repeated several times, and the PST thin films were sintered at 450-650 C for 1 h. All PST thin films showed dense and homogeneous structures without the presence of any rosette structure. The thicknesses of the PST thin films were approximately 200 nm. The dielectric constant and the dielectric loss of the PST thin films sintered at 550 C were about 404 and 0.0023, respectively. The leakage current density of the PST thin film sintered at 550 C was 3.13 x 10-8 A/cm2 at 1 V.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2000년도 International Symposium:on the Maritime Management Systems for Safer and Cleaner Seas in the New Millennium
• /
• pp.14-25
• /
• 2000

Should the Korea Maritime Police Agency (KMPA) be a comprehensive, multi-functional organization for a unique on-scene service at sea, as in the case of the U.S. Coast Guard, or should it be simply a water police agency, confining its mission only to law enforcement? The argument about enlarging or limiting KMPA's function has been and will be repeated. In this paper, Lee Sangjib highlights the internal and external issues facing KMPA, stemming partly from deficiencies of its struggles for advancement of the organization and partly from shortcomings of political support for it. In this regard, he urges KMPA to practise a scientific management system for maximizing cost-effectiveness of its administrative resources and for maintaining its identity and characteristics as a lead maritime agency. In addition, he also suggests that KMPA adopt the Total Quality Management System for quality improvements in services and greater efficiency in its organization structure to meet the future competition in the changing political and legal environment. He further recommends the proactive, non-regulatory 'Prevention Through People' program, pioneered by the U.S. Coast Guard, as a way of changing KMPA's existing lopsidedly legalistic culture. He concludes by providing a 6-point vision statement for KMPA from the standpoint of favoring enlarging the function of KMPA.

• 실천공학교육논문지
• /
• 제10권2호
• /
• pp.125-129
• /
• 2018

이 논문은 LTP 퍼니스의 최적화 된 내부 유동과 온도의 균일성에 대한 수치 해석에 관한 것이다. 반도체 제조 공정에서 실리콘 웨이퍼를 어닐링하기 위한 기능을 수행한다. 특히 챔버 내부의 최고 온도를 약 $400^{\circ}C$의 고온으로 유지하여 웨이퍼를 보강한다. 공정이 고온에서 완료되면 열 교환기를 통해 온도를 낮추고 이를 수행하기 위한 작업이 반복된다. 이 논문에서 최종적인 목표는 LTPS 퍼니스의 유동 해석을 통해 챔버의 단열 공급과 배기 구조의 최적 설계를 도출하는 것과 교육과정 개발을 위한 사례 발굴에 있다.

• Natural Product Sciences
• /
• 제25권2호
• /
• pp.130-135
• /
• 2019

The purification of the MeOH extract from Impatiens basamina by repeated column chromatography led to the isolation of one new tetrahydronaphthalene (1), together with eleven known compounds (2 - 12). The structure of the new compound (1) was determined by spectral data analysis ($^1H$ and $^{13}C$-NMR, $^1H-^1H$ COSY, HSQC, HMBC, NOESY, and HR-ESI-MS). Isolated compounds (1 - 12) were evaluated for their inhibitory effects on NO production in LPS-activated murine microglial BV-2 cells and their effects on NGF secretion from C6 glioma cells. Compounds 3, 7, and 10 reduced NO levels in LPS-activated murine microglial cells with $IC_{50}$ values of 26.89, 25.59, and $44.21{\mu}M$, respectively. Compounds 1, 5, and 9 upregulated NGF secretion to $153.09{\pm}4.66$, $156.88{\pm}8.86$, and $157.34{\pm}3.30%$, respectively.

• 유통과학연구
• /
• 제18권12호
• /
• pp.31-43
• /
• 2020

Purpose: This study examined how many determinant factors (service dimensions, food quality, and price perception) affect revisit intention. This practical concept is service quality (SERVQUAL), customer satisfaction, and repeated/revisit behavioral intention based on the theory of reasoned action (TRA). Research design, data and methodology: This research applied a hybrid mixed-method comprising exploratory and explanatory sequential design by Creswell (2014). The 400 responses were collected in four townships in Myanmar. This study drilled down to exploratory factor analysis (EFA) followed by confirmatory factor analysis (CFA) prior to test the hypothesized factor structure of all the variables resulted in the form of the goodness of fit. For further data analysis, structural equation modeling (SEM) was applied to test the relationships among the variables of the proposed model. Results: The results showed that perceived service quality, food quality, and price perception have direct effects on customer satisfaction and indirect effect on revisit intention. The perceived service quality has the most significant influence while the food quality has the least influence on customer satisfaction. Conclusions: The results are useful for the restaurant managers to better understand the significant strategic choice factors to improve higher quality service amongst restaurants both domestic and international under the stiff competition.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.235-243
• /
• 2019

In South Korea, millions of poultry have died due to repeated heat waves every year. The purpose of this study is to analyze the characteristics of heating and cooling loads of chicken houses in Korea and to present an effective insulation and ventilation measures to minimize the damage of poultry due to summer heat wave and to save energy in chicken houses in winter. The heating and cooling loads of standard chicken house were calculated. As a result of the calculation of maximum heating load based on the minimum ventilation rate in winter, the outdoor air temperature requiring heating was $6{\sim}7^{\circ}C$ to keep the indoor air temperature of chicken houses as $24^{\circ}C$. The peak cooling load of chicken houses was mostly taken by the heat generated by chickens and the heat gain due to ventilation. The heat gain through building envelopes was as small as neglectable. Most of chicken houses is usually cooled by gigantic forced ventilation in summer in Korea. When the chicken houses are cooled by electric cooling machine such as cooler or air conditioner, it is more effective to keep minimum ventilation rate to reduce the maximum cooling load. To lower the temperature of supplying water to cooling pad, it is recommended to use the underground water below 10 meters from the ground if there is abundant underground water.

• 한국지형학회지
• /
• 제25권1호
• /
• pp.47-65
• /
• 2018

Frost shattering has traditionally been considered as one of the most effective process in rock weathering. Each slab specimens of five or six rhyolite, basalt and tuff was prepared and put in freeze-thaw cycles and repeated 300 times in the temperature of $-25^{\circ}C$ to $+30^{\circ}C$ and their weathering patterns and products were analyzed by surface observation, particle size, XRD and thin section. As the result, some changes were observed in weathering patterns and weathering products. Rock shattering was more active in waterlogging rather than atmospheric conditions, but there are many differences depending on the type of rock. Rhyolite is hardly weathered by 300 times freeze-thaw cycles and generates the least amount of weathering products. Weathering of Basalt is limited to the surface layer where water can be absorbed, and produces a few amount of platy-shape debris. Tuff are separated by blocky structure which the particles are aggregated along their edges rather than enlarged existing cracks/joins or generated new joints.

• Smart Structures and Systems
• /
• 제26권6호
• /
• pp.721-733
• /
• 2020

The present study investigates the employing of piezoelectric patches in active control of a sandwich plate. Indeed, the active control and optimal patch distribution on this structure are presented together. A sandwich plate with honeycomb core and composite reinforced by carbon nanotubes in facesheet layers is considered so that the optimum position of actuator/sensor patches pair is guaranteed to suppress the vibration of sandwich structures. The sandwich panel consists of a search space which is a square of 200 × 200 mm with a numerous number of candidates for the optimum position. Also, different dimension of square and rectangular plates to obtain the optimal placement of piezoelectric actuator/senor patches pair is considered. Based on genetic algorithm and LQR, the optimum position of patches and fitness function is determined, respectively. The present study reveals that the efficiency and performance of LQR control is affected by the optimal placement of the actuator/sensor patches pair to a large extent. It is also shown that an intelligent selection of the parent, repeated genes filtering, and 80% crossover and 20% mutation would increase the convergence of the algorithm. It is noted that a fitness function is achieved by collection actuator/sensor patches pair cost functions in the same position (controllability). It is worth mentioning that the study of the optimal location of actuator/sensor patches pair is carried out for different boundary conditions of a sandwich plate such as simply supported and clamped boundary conditions.

• Communications for Statistical Applications and Methods
• /
• 제27권6호
• /
• pp.701-714
• /
• 2020

Quantitative high throughput screening (qHTS) assays are used to assess toxicity for many chemicals in a short period by collectively analyzing them at several concentrations. Data are routinely analyzed using nonlinear regression models; however, we propose a new method to analyze qHTS data using a nonlinear mixed effects model. qHTS data are generated by repeating the same experiment several times for each chemical; therefor, they can be viewed as if they are repeated measures data and hence analyzed using a nonlinear mixed effects model which accounts for both intra- and inter-individual variabilities. Furthermore, we apply a one-step approach incorporating robust estimation methods to estimate fixed effect parameters and the variance-covariance structure since outliers or influential observations are not uncommon in qHTS data. The toxicity of chemicals from a qHTS assay is classified based on the significance of a parameter related to the efficacy of the chemicals using the proposed method. We evaluate the performance of the proposed method in terms of power and false discovery rate using simulation studies comparing with one existing method. The proposed method is illustrated using a dataset obtained from the National Toxicology Program.

• Wind and Structures
• /
• 제32권5호
• /
• pp.439-452
• /
• 2021

The concept of Performance objective assessment is extended to wind engineering. This approach applies using the Database-Assisted Design technique, relying on the aerodynamic database provided by the National Institute of Standards and Technology (NIST). A structural model of a low-rise building is analyzed to obtain influence coefficients for internal forces and displacements. Combining these coefficients with time histories of pressure coefficients on the envelope produces time histories of load effects on the structure, for example knee and ridge bending moments, and eave lateral drift. The peak values of such effects are represented by an extreme-value Type I Distribution, which allows the estimation of the gust wind speed leading to the mean hourly extreme loading that cause specific performance objective compromises. Firstly a fully correlated wind field over large tributary areas is assumed and then relaxed to utilize the denser pressure tap data available but with considerably more computational effort. The performance objectives are determined in accordance with the limit state load combinations given in the ASCE 7-16 provisions, particularly the Load and Resistance Factor Design (LRFD) method. The procedure is then repeated for several wind directions and different dominant opening scenarios to determine the cases that produce performance objective criteria. Comparisons with two approaches in ASCE 7 are made.