• Journal of Korean Society of Steel Construction
• /
• v.24 no.2
• /
• pp.137-147
• /
• 2012

This paper describes an experimental study on the mechanical characteristic and behavior of a structure that has a joint between the reinforced concrete (RC) member and steel plate concrete (SC) member. An out-of-plane flexural test on an L-type test specimen and in-plane shear test on an I-type test specimen were carried out by means of repeated cyclic loading until their failure. Based on the results, the former showed pull-out failure mode of anchored vertical bars while the latter exhibited flexural failure mode of the basement member. These results reveal that the maximum capacity of the specimens is 96% and 82%, respectively, compared with the theoretical value.

• Biomedical Science Letters
• /
• v.4 no.2
• /
• pp.129-135
• /
• 1998

We have carried out polymerase chain reaction (PCR) to investigate if retropseudogene for CYP2El is present in human genome. PCR primers were designed based on the structure of functional CYP2El gene and used to amplify both functional gene and retropseudogene in one reaction. From the repeated experiments we were able to amplify a previously unidentified CYP2El retropseudogene that was present in human genome. Its detailed structure was confirmed by Southern blotting and DNA sequencing. Nucleotide sequence of this retropseudogene was completely matched up to human liver CYP2El mRNA suggesting that the development of this retropseudogene might be a relatively recent event.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.200-207
• /
• 2006

A new formal standardization methodology of the structural design document information is proposed in this paper. The standardization process is divided into three steps: pre-process of the collected sample document (CSD), construction of the document structure, and definition of the occurrence of each element in the document. During the pre-process, the detail document contents in the CSD are indexed with templates defined in this study, and the indexed CSD is translated into XML Schema (XSD) formal Afterwards the degree of confidences of all elements between the temporary standard document (TSD) and the translated CSD are calculated by using the XML schema matching algorithm; the TSD is then updated. This second step is repeated until all of the CSD are compared. In the final step, the common elements and unbounded elements are extracted by determining the occurrence of the temporary document elements, and the standardized document schema is exported in the XSD format. The case study dealing with the structural calculation documents show that the ,proposed methodology can be effectively used to build a XML -based information model of structural design documents.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.31.1-31.1
• /
• 2010

Various ZnO nanostructures were synthesized and ZnO nanostructure-based self-assembled transistors were fabricated. Compared to spindle and flower like nanostructure, the ZnO nanorod (NR) structure showed much stronger gate controllability, and greatly enhanced device performance, demonstrating that this structural variation leads to significant differences of the nanostructure network-based device performance. Also, patterned dry transfer-printing technique that can generate monolayer-like percolating networks of ZnO NRs has been developed. The method exploits the contact area difference between NR-NR and NR-substrate, rather than elaborate tailoring of surface chemistry or energetic. The devices prepared by the transferring method exhibited on/off current ratio, and mobility of ${\sim}2.7{\times}10^4$ and ${\sim}1.03\;cm^2/V{\cdot}s$, respectively. Also, they exhibited showing lower off-current and stronger gate controllability due to defined-channel between electrodes and monolayer-like network channel configuration. With multilayer stacks of nanostructures on stamp, the monolayer-like printing can be repeated many times, possibly on large area substrate, due to self-regulating printing characteristics. The method may enable high-performance macroelectronics with materials that have high aspect ratio.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.247-259
• /
• 2013

This study conceptually approaches and clearly compares the similarities and differences of fashion and architecture through a focus on their correlations. This study identifies the conceptual definitions of functional minimalism by an examination of function that represents the largest similarity between architecture and fashion. This study classifies the nature of functional minimalism and studies cases for each architectural classification in the areas of: the simplicity of a structure, unitarity pursuit of economic value, repeatability in an efficiency unit, reducibility stressing property, and multi-functional spatiality. The characteristics of functional minimalism fashion are distinguish as: simplicity in a structure that highlight structural lines in non-decorated design, unitarity pursuit of economic value represented in united process and pattern for its economic effect, repeatability in an efficiency unit represented through the repeated decoration of a functional unit, reducibility stressing a property that emphasizes property with a dominant design element through a highlight of the characteristics of materials and multi-functional spatiality that represents variability in clothes through an expansion of limited spatial function. This study approaches each discipline with a clear understanding of the differences between the two and suggests standards for a comparative study of architecture and fashion.

• KSTLE International Journal
• /
• v.9 no.1_2
• /
• pp.22-25
• /
• 2008

This paper investigated the wetting and adhesion property of undulated DLC film with surface morphology controlled for a reduced real area of contact. The undulated DLC Films were prepared by 13.56 MHZ radio frequency plasma enhanced chemical vapor deposition (r.f. PECVD) by using nanoscale Cu dots surface on a Si (100) substrate. FE-SEM, AFM analysis showed that the after repeated deposition and plasma induced damage with Ar ions, the surface was nanoscale undulated. This phenomenon changed the surface morphology of DLC surface. Raman spectra of film with changed morphology revealed that the plasma induced damage with Ar ions significantly suppressed the graphitization of DLC structure. Also, it was observed that while the untreated flat DLC surfaces had wetting angle starting ranged from $72^{\circ}$ and adhesion force of 333ni. Had wetting angle the undulated DLC surfaces, which resemble the surface morphology of a cylindrical shape, increased up to $104^{\circ}$ and adhesion force decreased down to 11 nN. The measurements agree with Hertz and JKR models. The surface undulation was affected mainly by several factors: the surface morphology affinity to cylindrical shape, reduction of the real area of contact and air pockets trapped in cylindrical asperities of the surface.

• Journal of Veterinary Clinics
• /
• v.19 no.2
• /
• pp.191-194
• /
• 2002

The nursing vocalization of domestic pigs(Landrace$\times$Yorkshire) was investigated with respect to common features. All vocalizations uttered during nursings in 5 sows at 5 days after farrowing were recorded and 305 grunts were processed in a spectrograph. The sow's repeated grunting during nursing can be regarded as a contact call and a signal of the mother to start and synchronize the suckling behavior of the piglets. Analysis in the time domain revealed the gross structure of the call, whereas in the frequency domain the fine structure of single grunts was investigated. Nursing interval, duration of nursing behavior, duration of grunt, grunt rate per 10 seconds, fundamental frequency, 1 formant, 2 formant, 3 formant, 4 formant and spectrum were investigated. The results showed that mean interval between the nursing following one another was 25, 4.6 min and duration of nursing behavior was 3.2 $\pm$ 0.7 min. Average duration of grunt was 203.9 $\pm$ 63.6 ms. The formant contours could be identified. The nursing behavior might be disturbed by the grunts of alien sow.

• The Korean Journal of Applied Statistics
• /
• v.15 no.1
• /
• pp.45-55
• /
• 2002

The 2-level rotation design based on 3 rotation groups is discussed in view of Monthly Retail Trade Survey conducted by the Bureau of Census in U.S., and composite estimators for population characteristics are concerned. The generalized composite estimators and the recursive composite estimators are presented at 2-level rotation design with design gap and variance formulas for the composite estimators are provided. Also under the response variability related with covariance structure and correlation structure from repeated response, relative efficiencies of the composite estimators are compared.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.415-415
• /
• 2012

ZnO nanostructures were synthesized by a vapor phase transport process in a single-zone furnace within a horizontal quartz tube with an inner diameter of 38 mm and a length of 485 mm. The ZnO nanostructures were grown on Au-catalyzed Si(100) substrates by using a mixture of zinc oxide and graphite powders. The growth of ZnO nanostructures was conducted at $800^{\circ}C$ for 30 min. High-purity Ar and $O_2$ gases were pushed through the quartz tube during the process at a flow rate of 100 and 10 sccm, respectively. The sequence of ON/OFF cycles of the Ar gas flow was repeated, while the $O_2$ flow is kept constant during the growth time. The Ar gas flow was ON for 1 min/cycle and that was OFF for 2 min/cycle. The structure and optical properties of the ZnO nanostructures were investigated by field-emission scanning electron microscope, X-ray diffraction, temperature-dependent photoluminescence. The preferred orientation of the ZnO nanostructures was along c-axis with hexagonal wurtzite structure.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2008.10a
• /
• pp.90-93
• /
• 2008

In natural language, it is common that repetitive constituents in an expression are to be left out and it is necessary to figure out the constituents omitted at analyzing the meaning of the sentence. This paper is on recognition of boundaries of parallel noun phrases by figuring out constituents omitted. Recognition of parallel noun phrases can greatly reduce complexity at the phase of sentence parsing. Moreover, in natural language information retrieval, recognition of noun with modifiers can play an important role in making indexes. We propose an unsupervised probabilistic model that identifies parallel cores as well as boundaries of parallel noun phrases conjoined by a conjunctive particle. It is based on the idea of swapping constituents, utilizing symmetry (two or more identical constituents are repeated) and reversibility (the order of constituents is changeable) in parallel structure. Semantic features of the modifiers around parallel noun phrase, are also used the probabilistic swapping model. The model is language-independent and in this paper presented on parallel noun phrases in Korean language. Experiment shows that our probabilistic model outperforms symmetry-based model and supervised machine learning based approaches.