• Journal of Chest Surgery
• /
• 제23권5호
• /
• pp.899-904
• /
• 1990

One hundred and nine Patients with thoracic empyema were treated at the Chosun university hospital from Jul. 1983 to Sep. 1989. Seventy-nine[72.5%] of the empyemas were adults and 30[27.5%] patients were under fifteen-year children. 29 patients[26.6%] were associated with pulmonary tuberculosis, 23[21.1%] occurred as pneumonia, and 13[11.9%] were unknown. The cardinal symptoms were dyspnea, chest pain, fever, coughing. When used as the initial mode of drainage, repeat thoracentesis was successful in only 46 of 93 cases[49. 5%]. Rib resection, however, provided cure or controlled in 7 cases[100%]. And decortication showed high cure rate in 19 of 24 cases[79.2%] Eventual control or cure of empyema was achieved in 90 patients[89.6%], whereas 7 patients[6.4%] died [3 from their empyema and 4 with empyema as an active problem at the time of death]. of all empyema-caused deaths occurred in patients who underwent chest tube drainage as the most invasive treatment modality. Chest tube drainage was often inadequate and more aggressive management was likely to result in fewer treatment failure and fewer total procedure. Early rib resection was recommended.

• 대한전자공학회논문지TC
• /
• 제45권1호
• /
• pp.66-71
• /
• 2008

본 논문에서는 H-ARQ를 위한 NACK 신호를 이용한 안테나 스위칭 방식을 제안하고 V-BLAST 시스템에서 분석하였다. 여기서 전송 안테나는 재전송시 번갈아 스위칭 되어 동작한다. 상관된 페이딩 채널에서 제안된 방식의 채널 용량을 해석적으로 분석함으로써, 채널 상관성의 악영향이 안테나 스위칭 방식으로 줄어듦을 보인다. 시뮬레이션 결과를 통해 상관된 페이딩 채널에서 평균 수율은 큰 복잡도의 증가 없이 개선되어질 수 있음을 보인다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.3-8
• /
• 2001

This study is an investigation for the ADS optimum design by using FEA. We write out program which express ADS perfectly and reduce the required time for correcting of model to the minimum in solution and manufacture result. We complete algorithm which can plan optimum forming of model by feedback error information in CAE. Then we correct model by feedback date obtaining in solution process, repeat course following stress solution again and do modeling rachet wheel for optimum forming. That is our aim. In rachet wheel, greatest equivalence stress originates in key groove corner and KS standard is proved the design for security.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.406-409
• /
• 2001

This study is an investigation for the ADS optimum design by using FEA. We write out program which express ADS perfectly and reduce the required time for correcting of model to the minimum in solution and manufacture result. We complete algorithm which can plan optimum forming of model by feedback error information in CAE. Then we correct model by feedback date obtaining in solution process, repeat course following stress solution again and do modeling rachet wheel for optimum forming. That is our aim. In rachet wheel, greatest equivalence stress originates in key groove corner and KS standard is proved the design for security.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1328-1331
• /
• 2003

As rates of gastric cancer. fatness. and GERD (chronic gastric esophageal reflux disease) patients have been increased in the world, suturing mechanism using endoscope has been focused. which is the medical instrument to apply stitches and suturing inside the body, since it helps the patients lessen pains and reduce operation time. This paper deals with mechanism design, which makes it possible to apply multiple suturing without the repeat of inserting and removing the endoscope. This successive suture mechanism includes gripper, linkage, rotational part, and articulation part. Also, the mechanism is operated through 4mm one-side channel attached to the endoscope by means of pulling wires.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.310-317
• /
• 2006

Currently most practical vibration and structural problems in automotive suspensions require the use of the finite element method to obtain their structural responses. When the finite element model has a very large number of degrees of freedom the harmonic and dynamic analyses are computationally too expensive to repeat within a feasible design process time. To alleviate the computational difficulty, this paper presents a moment-matching based model order reduction (MOR) which reduces the number of degrees of freedom of the original finite element model and speeds up the necessary simulations with the reduced-size models. The moment-matching model reduction via the Arnoldi process is performed directly to ANSYS finite element models by software mor4ansys. Among automotive suspension components, a knuckle is taken as an example to demonstrate the advantages of this approach for vibration simulation. The frequency and transient dynamic responses by the MOR are compared with those by the mode superposition method.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.31-36
• /
• 2003

Base and saddle feed drive system in machine tool puts in operation for Improvement of life and endure by high frequency heat treatment. In this time, work requirement of establishment to gets by repeat experimentation. In this paper, using the finite elementary method, we predict and revision processing, and gets minimizing of deformation and reduce the progress of Grinding works. Moreover, having high frequency heat treatment, the maximum deformation genesis m the middle parts without slideway length. Take deformation Into finite element program (ANSYS) of taper process in roughing process, after having high frequency heat treatment, existed quantity of deformation can be reduced down to 80 percents.

• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.45-50
• /
• 2002

This study is an investigation far the Am optimum design using FEA. We write out program which express ADS perfectly and reduce the required time far correcting of model to the minion in solution md manufacture result. We complete algorithm which can plan optimum forming of model by feedback error information in CAE. Then we contract model by feedbback date obtaining in solution process, repeat course following stress solution again iud do modeling rachet wheel for optimum forming. That is our aim. In cachet wheel, greatest equivalence strss originates in key groove comer and KS standard is proved the design far security.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.19-29
• /
• 1997

A natural colorant was extracted from Clove using methanol. The dyeabilities and fastness of silk fabrics dyed with Clove extract were investigated. The results obtained were as follows; 1. The colorant extracted with methanol was higher in concentration than that with boiling water and was represented high reproducibility. 2. The optimum dyeing temperature and dyeing time were 6$0^{\circ}C$ and 60min, respectively. 3. The color depths were observed to be decreased as follows; pre-mordant > after-mordant repeat dyeing > after-mordant > simultaneous-mordant 4. Clove extract dyed brownish black on the Fe-mordanted silk. In case of the other mordants, silk fabrics dyed yellow. 5. The dyed silks had poor light-fastness but good wet-fastness.

• 공학교육연구
• /
• 제16권4호
• /
• pp.30-36
• /
• 2013

Applying intuitive learning method on engineering education, especially for the mechanical engineering, is hardly found from the previous case studies and is not easily proved its beneficial verification. Verbal repetition is also rarely used to investigate its positive effects on educational methodology for both science and engineering disciplines. To prove the education effects of these two methods; we used intuitive thinking time period at the beginning of each lecture and let students repeat the concepts and the equations verbally. These two methods were related to the subjects of each lecture, and were used for students to try to draw engineering thinking from natural phenomena that they could easily experience in daily life. The methods could help them to memorize theoretical ideas. We investigated the effects of intuition and verbal repetition methods by comparing the scores of final exam with those of midterm exam. The results revealed significant improvement; 77.6% of the students achieved higher score in their final exam compared to midterm exam. We plan to investigate qualitative contributions of intuition and verbal repetition methods to the students' achievement for the further research.