• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.232-239
• /
• 2005

Recently geosynthetics that can be constructed on soft ground have been used for reinforcement and separation in various ways. Through laboratory model tests and numerical analysis, in this study, estimated the suitability of cable elements and appropriate input factors considering loading effect in modeling of geosynthetics. First, in laboratory model tests, geosynthetics were constructed on the clay, and covered with the thickness, 7.5cm of sand mat. And then static and dynamic model tests were performed measuring loading, settlement, ground lateral displacement, and displacements of geosynthetics, but, for cyclic loading, bearing capacity increased linearly with stiff slop because cyclic loading with constant cyclic pressure compacted the ground. Numerical analysis were performed with FLAC 4.0 2D using Mohr-Coulomb and Modified Cam-Clay models, and they compared with the results of model tests. Cable elements of FLAC in modeling geosynthetics couldn't consider the characteristics of geosynthetics that increase shear strength between geosynthetics and clay according to the loading increase. Therefore, in this study, appropriate equation that can consider loading effects in Cable elements was proposed by Case Study.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.3
• /
• pp.1-9
• /
• 2012

If the railways consisting of soil subgrade is applied to repetitive loading, elastic deformation and plastic deformation will occur at the same time. So the repeat traffic loading condition should be considered to predict the long-term deformation on railway roadbed. In this study, laboratory data from the repeated load triaxial tests and cylinder model test were used to predict accumulated settlement on railway foundation and results were analyed based on the nonliear models and stress state considered. It has proposed predict model using power function model on plastic settlement of roadbed materials.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.241-249
• /
• 2002

Optical fiber is indispensable for optical communication systems that transmit large volumes of data at high speed, but super precision technology in sub-micron units is required for optical axis adjustment. We developed the automatic optical fiber by image processing and automatic loading system. we have developed 6-axis micro stage system for I/O optical fiber arrays, the initial automatic aligning system software for a input optical array by the image processing technique, fast I/O-synchronous aligning strategy, the automatic loading/unloading system and the automatic UV bonding mechanism. In order to adjust the alignment it used on PC based motion controller, a $10{\mu}m$ repeat-detailed drawing of automatic loading system is developed by a primary line up for high detailed drawing. Also, at this researches used the image processing system and algorithm instead of the existing a primary hand-line up and fiber input array and waveguide chip formed in line by automatic.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.199-205
• /
• 2012

This work investigates the progressive linear precoder design for packet retransmissions in multi-input multi-output (MIMO) systems with multiple codewords and automatic repeat request (ARQ) bundling feedback. Assuming perfect channel state information, a novel progressive linear ARQ precoder is proposed in the perspective of minimizing the packet error rate. We devise the ARQ precoder by combining power loading and sub channel pairing between current retransmission and previous transmissions. Furthermore, we extend the design to the case that the channel estimation error exists. Numerical results show that the proposed scheme can improve the performance of MIMO ARQ systems significantly regardless of the channel estimation error.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.536-539
• /
• 2002

In this paper, we developed the automatic optical fiber aligner by image processing and automatic loading system. Optical fiber is indispensable for optical communication systems that transmit large volumes of data at high speed, but super-precision technology in sub-micron units is required for optical axis adjustment, we have developed 6-axis micro stage system for I/O optical fiber arrays, the initial automatic aligning system/software for a input optical array by the image processing technique, fast I/O-synchronous aligning strategy, the automatic loading/unloading system and the automatic UV bonding mechanism. In order to adjust the alignment it used on PC based motion controller, a $10\mu\textrm{mm}$ repeat-detailed drawing of automatic loading system is developed by a primary line up for high detailed drawing. Also, at this researches used the image processing system and algorithm instead of the existing a primary hand-line up. and fiber input array and waveguide chip formed in line by automatic. Therefore, the developed and manufactured optical aligning system in this research fulfills the great role of support industry for major electronics manufacturers, telecommunications companies, universities, government agencies and other research institutions.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.344-349
• /
• 2005

Cast steels have been mainly in rod type couplers which connect railway vehicles. These components, as important members, are exposed to repeat to repeated stresses and impact loading during stop and departure service for a long tie. The coupler suffers fatigue crack initiations and demage that cause need to repair weldment due to these loading conditions. Therefore, the heat affected zone of cast steel couple in rod type were evaluated in view of metallurgical weld characteristics after repair welding at laboratory. The specimens with two different welding techniques were evaluated after several welding conditions and post-heat treatments. Micro-vickers hardness and tensile tests and microstructural observations were conducted on heat affected zone of the weldment according to repair weld and post-heat treatment.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.65-75
• /
• 1998

The fracture resistance curve is one of most important and design techniques employed in nuclear pressure vessel structures. This study is to evaluate the J-R curve characteristics for the SA508C-3 by the unloading compliance method and load rato analysis. The effect of strain aging for the exponential correlation of the J-R curve in this metal are investigated at room temperature, 20$0^{\circ}C$ and 30$0^{\circ}C$. The load ratio analysis method can evaluate the J-R curve by using the simple tension load-displacement curve only without the repeat of the unloading and loading. Therefore, the analysis by the proposed load ratio method has a merit, in comparison with the unloading compliance method, which can measure the crack length without the precision measurement equipment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.39-42
• /
• 2012

Pusher-Loaded Scrapers are important construction equipment for large earthmoving operations. Production rates of a Pusher-Loaded Scraper vary greatly in accordance with the temperature or elevation, the equipment performance, haul speed, haul-road conditions, the method of loading, and Number of scrapers per one pusher. Determining of most economical scrapers fleet regarding the size of equipment, model name, and number of scrapers demands time-consuming calculation because it needs to reference of varied performance charts or tables and repeat complicated calculation. In this study, decision-making support system for the Optimal Pusher-loaded Scrapers Fleet is suggested for the purpose of calculating easily and handling effectively variables which are changed depend of the work conditions. The prototype of this program is developed using MATLAB. And the Database of Pusher-loaded Scraper embodies Performance chart & Retarder chart, soil properties, and calculation-support table.

• YAKHAK HOEJI
• /
• v.32 no.4
• /
• pp.213-221
• /
• 1988

Inducible MLS resistance gene of Bacillus licheniformis specified by erm K was subcloned in Bacillus subtilis and the DNA sequence corresponding to its control region was determined. The determinant erm K was in Pvu II=Hind III fragment, which was 1.3 kb. The leader region is capable of forming a complex series of inverted complementary repeat sequences (ICRS) centering on at least six axes of symmetry, some of them mutually exclusive, in a way that resulted ultimately in post-transcriptional unmasking of the ribosome loading site for methylase synthesis.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.112-112
• /
• 2003

Telomere란 진핵세포에 존재하는 DNA-protein 복합체로서 염색체의 말단부에 tandem repeated DNA 서열 (TTAGGG)과 특정 단백질로 구성되어 있으며 세포 분열이 진행함에 따라 이의 길이가 짧아지게 되고 일정 길이 이하가 되면 세포의 사망이 유발된다. 반면 telomerase는 ribonucleoprotein으로서 telomeric DNA의 합성에 관여하는 것으로 염색체의 말단에 telomeric DNA의 소실을 보충하는 역할로 알려져 있다. 최근 암, 노화 등과 관련하여 telomere 및 telomerase의 연구들이 활발히 진행되고 있으며, 다양한 세포들에 있어 이들의 존재와 역할에 대해서도 많은 연구들이 수행되고 있다. 포유동물의 초기 배자에 있어 telomere의 분포 양상과 telomerase의 activity의 분석은 배 발생의 기작과 배자의 세포적 특성을 구명하는데 매우 중요한 과제라 사료된다. 따라서 본 연구에서는 마우스의 초기 배 발생 단계별 수정란의 telomeric DNA의 분포 양상과 각 단계별 배자들의 telomerase activity를 제시하고자 하였다. 시험에 공시된 마우스는 4-6주령된 ICR계통으로 이들을 과배란 처리 후 자연 교배시켜 얻은 2-, 4-, 8-세포기배, 상실배 및 배반포배를 대상으로 하였다. Telomeric DNA의 양적 분석은 각 발생단계별 수정란의 표본을 제작하고 human telomere repeat probe를 이용하여 FISH (fluorescence in situ hybridization)를 시행하였으며, 분리된 할구들을 형광현미경으로 관찰 후 상을 포착하고 image analyser program (MataMorph, UIC, USA)을 이용하여 한 개의 세포내 telomere의 상대적 함량을 분석하였다. 발생 단계별 배자의 telomerase activity의 분석은 TRAP (telomeric repeat amplofication protocol) assay로 분석한 바 각 발생 단계별 30개의 수정란으로부터 핵 단백질을 추출하여 telomerase를 신장시키고 PCR을 시행한 후 15% PAGE gel loading하여 이의 activity를 확인하였다. 분석 결과, telomeric DNA의 함유율은 발생단계별 다소의 차이를 나타내었으며 telomerase activity는 모든 발생단계의 수정란에서 확인할 수 있었고, 특히 상실배부터 높게 나타남을 확인하였다.