• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.129-133
• /
• 2006

In China, the traditional method of artificial and periodical cruise is still adopted for the AtoN management, which has brought many disadvantages to the work of the AtoN management, such as non real-time, fallibility, and low efficiency However, with the rapid development of AIS technique, now AIS equipments have been widely installed on ships, and on the other hand China Maritime Safety Administration (abr. China MSA) is carrying out the scheme of AIS base station network in china, based on which the digital AtoN will develop in the future. According to what have been analyzed above, this paper puts forward a design of AtoN wireless surveillance system based on AIS. The system consists of AIS on AtoN, AIS base station and AtoN management center. It can provide such functions as the information gathering, managing of AtoN and the service of navigation assistance. This paper gives the whole design including the work theory, the hardware structure and the software scheme of the system, and finally gives the simulation software of the AtoN management center. The AtoN wireless surveillance system brought forward by this paper will be more efficient with less repair cost and less work of the supervisors. It will bring revolutionary progress in the navigation aids system in China.

• Clinics in Shoulder and Elbow
• /
• v.12 no.1
• /
• pp.76-79
• /
• 2009

Purpose: Capsulolabral reconstruction in a traumatic anterior instability of the glenohumeral joint is successful not only for the prevention of recurrent instability but also for the restoration of function. Materials and Methods: However, a capsulolabral procedure alone cannot guarantee a successful result when there is severe bone loss of the glenoid. Results: We report the surgical technique and results of capsulolabral repair and extraarticular bone block with an autogenous iliac crest graft performed on three cases (all male, average age 28 years, minimum follow-up 12 months) with traumatic anterior instability associated with more than 30% glenoid bone loss.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.661-666
• /
• 2002

We need the flexible method for communication network configuration and fault management business procedure. Therefore development of systematic integrating fault management system is essential to meet on these requests. We must design the integrating fault management system so that can run the repair processing for both data communication network management and new next generation data communication network of various type. In general it is effective that the system is consisted of decentralized module to be accessibele for business logic and datum to remote area. To Solve these problem, a method is to use object-oriented design technique. That is, it is to abstract reusability objects and make component module using the abstracted objects. In this paper, we propose a fault management system of communication network service using object-oriented design techniques which are UML(Unified Modeling Language) and EJB(Enterprise Java Bean).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.3
• /
• pp.366-372
• /
• 2001

The ice plugging process consists of placing liquid nitrogen around a pipe and removing heat until the water in the pipe freezes and provides a solid plug or seal against fluid movement. This technique enables us to repair or inspect a pipe system without shutdown of entire system. A set of test apparatus for investigation of the liquid freezing phenomena during ice plugging is prepared. This study shows the characteristics of the liquid freezing and the heat transfer with various pipe and freezing jacket conditions. And in case there is flow of the fluid inside the pipe, the flow rate which can be able to form the ice plug is identified with the effect of the pipe diameter and freezing jacket length on the plug formation. The permissible maximum flow rate for the complete plug formation is approximately proportional to the freezing jacket length at the same pipe diameter condition.

• Korean Journal of Head & Neck Oncology
• /
• v.32 no.2
• /
• pp.79-83
• /
• 2016

Chyle fistula is one of the complications of neck dissections. Although immediate surgical repair seems to be the best choice when chyle leakage is observed during the operation, some operators can be embarrassed when chyle leakage is heavy and not controlled during surgery. In this case, chyle leakage was occurred after extensive resection of lymph nodes in left level IV, and was not controlled in any way. The clavicular head of sternocleidomastoid muscle was dissected and inferior-based muscular flap was rotated to cover the suspected region of fistula orifice. Amount of drainage was checked less than 20 ml per day in the following days, and drain tube was taken out on the 3rd postoperative days. We present the technique using the inferior based sternocleidomastoid muscle flap for intraoperative management of chyle leakage not easily controlled.

• Archives of Plastic Surgery
• /
• v.46 no.4
• /
• pp.381-385
• /
• 2019

Hypospadias is a congenital malformation of the male genitalia. The reconstructive objectives are to obtain voiding with laminar flow and satisfactory sexual function. Several urethroplasty techniques have been described, but for perineal or revisional cases no single technique has shown robust success. In this study, we describe the expanded use of intestinal flaps for urethral reconstruction and report a peculiar request from a patient to undergo peno-urethral separation after successful hypospadias repair with a free ileum flap. A 51-year-old male patient with perineal hypospadias underwent several urethral reconstructive procedures with poor outcomes. A free ileum flap was attempted as a substitute for the urethra. Following successful reconstruction, separation of the neo-urethra (ileum) from the penile body was performed to address the patient's sexual expectations. A free ileum flap proved to be a reliable urethral substitute in perineal hypospadias reconstruction, with a successful outcome. The peno-urethral separation with the creation of an "accessory penis," however peculiar, optimized the results in terms of both sexual and urinary function. Anatomical restoration of the urethra and patient-reported expectations are the key to successful hypospadias reconstructive procedures. Sexual function outcomes and the patient's perception of success should not be underestimated, even when urinary function has been restored.

• Journal of Medicine and Life Science
• /
• v.15 no.2
• /
• pp.56-61
• /
• 2018

Advances in medical technology has enabled better management of complicated and chronic wounds. Negative-pressure wound therapy (NPWT) is a novel dressing technique that uses negative pressure to drain exudates and blood from wounds. NPWT increases local blood flow and promotes reduction of edema and wound healing and is suitable for a variety of wounds. It is associated with few adverse effects and shows excellent efficacy and cost-effectiveness. NPWT promotes rapid growth of granulation tissue and wound contraction; thus, it is more advantageous than general dressings as it reduces the size skin of grafts or flaps required for repair, and patients with chronic wounds can be treated as outpatients. We investigated the general usage and mechanism of NPWT, its clinical applications and adverse effects.

• Archives of Plastic Surgery
• /
• v.46 no.3
• /
• pp.277-281
• /
• 2019

Recto-vaginal fistulas are difficult to treat due to their high recurrence rate. Currently, no single surgical intervention is universally regarded as the best treatment option for recto-vaginal fistulas. We present a case of recurrent recto-vaginal fistula surgically treated with a gracilis pull-through flap. The surgical goals in this patient were complete excision of the recto-vaginal fistula and introduction of fresh, vascularized muscle to seal the fistula. A defunctioning colostomy was performed 1 month prior to the present procedure. The gracilis muscle and tendon were mobilized, pulled through the freshened recto-vaginal fistula, passed through the anus, and anchored externally. Excess muscle and tendon were trimmed 1 week after the procedure. Follow-up at 4 weeks demonstrated complete mucosal coverage over an intact gracilis muscle, and no leakage. At 8 weeks post-procedure, the patient resumed sexual intercourse with no dyspareunia. At 6 months post-procedure, her stoma was closed. The patient reported transient fecal staining of her vagina after stoma reversal, which resolved with conservative treatment. The fistula had not recurred at 20 months post-procedure. The gracilis pull-through flap is a reliable technique for a scarred vagina with an attenuated recto-vaginal septum. It can function as a well-vascularized tissue plug to promote healing.

• Structural Monitoring and Maintenance
• /
• v.9 no.3
• /
• pp.237-258
• /
• 2022

This paper studies detecting and locating loose bolts using nonlinear guided waves. The 3D Finite Element (FE) simulation is used for the prediction of guided waves' interactions with loose bolted joints. The numerical results are verified by experimentally obtained data. The study considers bolted joints consisting of two bolts. It is shown that the guided waves' interaction with surfaces of a loose bolted joint generates Contact Acoustic Nonlinearity (CAN). The study uses CAN for detecting and locating loose bolts. The processed experimentally obtained data show that the CAN is able to successfully detect and locate loose bolted joints. A 3D FE simulation scheme is developed and validated by experimentally obtained data. It is shown that FE can predict the propagation of guided waves in loose bolts and is also able to detect and locate them. Several numerical case studies with various bolt sizes are created and studied using the validated 3D FE simulation approach. It is shown that the FE simulation modeling approach and the signal processing scheme used in the current study are able to detect and locate the loose bolts in imperfect bolted joints. The outcomes of this research can provide better insights into understanding the interaction of guided waves with loose bolts. The results can also enhance the maintenance and repair of imperfect joints using the nonlinear guided waves technique.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.4
• /
• pp.119-126
• /
• 2021

During the development of a weapon system, the concept of maintainability is used for quantitatively predicting and analyzing the maintenance time. However, owing to the complexity of a weapon system, the standard maintenance time predicted during the system's development differs significantly from the measured time during the operation of the equipment after the system's development. According to the analysis presented in this paper, the maintenance time can be predicted by considering the system's complexity on the basis of the military specifications, and the procedure can be Part B of Procedure II and Method B of Procedure V. The maintenance work elements affected by the system complexity were identified by the analytic hierarchy process technique, and the system-complexity-reflecting weights of the maintenance work elements were calculated by the Delphi method, which involves expert surveys. Based on MIL-HDBK-470A and MIL-HDBK-472, it is going to present a Korean-style maintainability prediction method that reflects system complexity of weapons systems.