• 한국건설순환자원학회논문집
• /
• 제4권4호
• /
• pp.396-403
• /
• 2016

본 연구에서는 지하 콘크리트 구조물에 누수 발생 시 콘크리트 배면에 주입하여 보수를 시행하는 1액형 점착 실링재에 대해 알아보고 새로운 콘크리트 배면 주입재인 2액형 점착 실링재에 대한 평가를 진행하였다. 2액형 점착 실링재는 아스팔트 계열의 주제와 라텍스 계열의 증점제로 구성된 실링재이며, 주제와 증점제의 배합비에 따라 실링재의 점도편차가 크게 나타났다. 이에 주제와 증점제의 배합비를 투수시험을 통해 확인한 결과 주입성, 경제성, 성능을 고려하여 적정배합비를 6:1로 정하고 KS F 4935 평가를 진행하였다. 2액형 점착 실링재는 static mixer를 활용한 카트리지 타입의 용기를 이용하여 주입이 가능하고 KS F 4935 시험방법에 따라 평가를 진행한 결과 KS 기준을 만족하였다.

• 한국전자통신학회논문지
• /
• 제3권1호
• /
• pp.1-7
• /
• 2008

해저광케이블은 국제통신의 98% 이상을 처리하고 있는 국가의 중요한 정보통신 인프라이다. 하지만 선박의 닻, 어선의 어구, 해저 지진 등 다양한 요인으로 인해 고장이 발생하며, 고장 발생시 대용량 해저통신 트래픽의 영향을 최소화하고, 케이블 수리 선박의 운영비용 절감을 위해서 수리 기간을 최대한 단축해야 한다. 해저광케이블 고장 유형은 Shunt Fault, Cable Cut, Open Fault, Fiber Break 등 여러 유형이 있으며, 고장이 발생하면 육상 터미널 국사(육양국)에서 정확하고 신속하게 고장 유형 및 고장 지점을 파악하고, 케이블 수리 선박은 수리 현장으로 출동하여 수리 작업을 수행하게 된다. 수리작업 기간 중 육양국에서는 케이블 수리 선박에서 요청하는 각종 Test를 수행하게 되며, 이때 육양국 Test 기법은 매우 중요하다. 본 논문에서는 해저광케이블 고장 유형 및 고장 지점 탐지 기법을 제시하고, 해저광케이블 수리기간 단축을 위한 육양국 Test 기법을 고찰하고자 한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권4호
• /
• pp.153-159
• /
• 2006

현재, 폴리머는 보수용 모르타르의 혼화재료로 주로 사용되고 있으며, 이러한 보수용 모르타르에는 폴리머 이외에 각종 혼화재료가 첨가되어 있다. 본 연구에서는 폴리머의 배합비율에 따라 보수용 모르타르에 미치는 영향과 동일한 EVA계 폴리머가 제조사가 다른 제품에 따라 미치는 영향을 비교하고자 모르타르의 굳기 전 특성 및 역학적 특성에 대하여 시험을 통하여 분석하였다. 시험결과 보수용 모르타르에 폴리머의 배합비율이 증가될수록 역학적 특성(압축강도, 휨 강도, 부착강도)이 개선되었으며, 또한 건조수축도 증가하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.5-10
• /
• 2001

Due to the development of high-strength fibers and adhesives, it is now possible to repair cracked metallic plates by bonding reinforced patches to the plate over the crack. In this study, pre-cracked aluminum 6061-T6 alloy plates repaired with bonded carbon/epoxy composite patch are applied to investigate the effect of various patch shapes on the tensile strength and the fatigue behavior of the structure. A non-patch-boned cased and 2 type-50$\times$50, 40$\times$20 mm-composite patch-bonded cases were tested to obtain fracture loads and fatigue crack growth rate. The results showed that the patch-bonded repair improves the static strength by 17% and the fatigue life by 200% compared to non-repaired case. It means that patch-boned repair is more effective in the fatigue life. It was also revealed that the patching method along crack growth direction is more efficient in cost and weight reduction. By observing the fractography, patch-bonded repair specimens demonstrated zigzag fracture patterns compared with the non-patched specimens, which shows a typical ductile fracture.

• Advances in concrete construction
• /
• 제15권6호
• /
• pp.431-444
• /
• 2023

This study investigated the use of latex-modified sand concrete reinforced with sisal fibers (LMSC) as a repair material. Notably, no prior research has explored the application of LMSC for this purpose. This paper examines the interface bond strength and the type of failure between LMSC as a repair material and the normal concrete (NC) substrate utilising four different surfaces: without surface preparation as a reference (SR), hand hammer (HA), sandblasted (SB), and grooved (GR). The bond strength was measured by bi-surface shear, splitting tensile, and pull-off strength tests at 7, 28, and 90 days. Scanning electron microscopy analysis was also performed to study the microstructure of the interface between the normal concrete substrate and the latex-modified sand concrete reinforced with sisal fibers. The results of this study indicate that LMSC has bonding strength with NC, especially for HR and SB surfaces with high roughness. Therefore, substrate NC surface roughness is essential in increasing the bonding strength and adhesion. Eventually, The LMSC has the potential to repair and rehabilitate concrete structures.

• Journal of Chest Surgery
• /
• 제50권3호
• /
• pp.137-143
• /
• 2017

Acute complicated type B aortic dissection (TBAD) is a potentially catastrophic, life-threatening condition. If left untreated, there is a high risk of aortic rupture, irreversible organ or limb damage, or death. Several risk factors have been associated with acute complicated TBAD, including age and refractory hypertension. In the acute phase, even uncomplicated patients are more prone to develop complications if hypertension and pain are left medically untreated. Innovations in stent graft technologies have incrementally improved outcomes since their first use for this condition in 1999, though improvement is needed in mitigating periprocedural complications, adverse events, and mortality. In the past decade, endovascular repair has become the preferred treatment because of its superior outcomes to open repair and medical therapy. The Valiant Captivia Thoracic Stent Graft System is a third-generation endovascular stent graft with advancements in minimally invasive delivery, conformability to the anatomy, and the minimization of adverse sequelae. Herein, this stent graft is briefly reviewed and its 3-year outcomes are presented. Freedom from all-cause and dissection-related mortality was 79.1% and 90.0%, respectiv ely. The Valiant Captiv ia Stent Graft represents a safe, effective intervention for acute complicated TBAD. Continued surveillance is needed to verify its longer-term durability.

• Journal of Chest Surgery
• /
• 제53권6호
• /
• pp.411-413
• /
• 2020

A 34-year-old man who had undergone aortic valve replacement 8 years ago underwent an additional Bentall operation due to mechanical valve dehiscence 2 years later. Subsequently, he was diagnosed with Behçet disease and Batter syndrome. A week after being hospitalized again due to chest pain and dyspnea, a large pseudo-aneurysm was detected on computed tomography. Because of the excessively large size of the pseudo-aneurysm, surgical treatment seemed very risky. Therefore, we planned to perform thoracic endovascular aortic repair (TEVAR) and treated him successfully. However, the patient experienced recurrence of the same symptoms 4 months later, and was found to have type IV endoleak. He received a TEVAR procedure again, and it was successful.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.23.1-23.9
• /
• 2019

Objectives: The aim of this study was to investigate the microshear bond strength (${\mu}SBS$) of different universal adhesive systems applied to hybrid computer-aided design/computer-aided manufacturing (CAD-CAM) restorative materials repaired with a composite resin. Materials and Methods: Four types of CAD-CAM hybrid block materials-Lava Ultimate (LA), Vita Enamic (VE), CeraSmart (CS), and Shofu Block HC (SH)-were used in this study, in combination with the following four adhesive protocols: 1) control: porcelain primer + total etch adhesive (CO), 2) Single Bond Universal (SB), 3) All Bond Universal (AB), and 4) Clearfil Universal Bond (CU). The ${\mu}SBS$ of the composite resin (Clearfil Majesty Esthetic) was measured and the data were analyzed using two-way analysis of variance and the Tukey test, with the level of significance set at p < 0.05. Results: The CAD-CAM block type and block-adhesive combination had significant effects on the bond strength values (p < 0.05). Significant differences were found between the following pairs of groups: VE/CO and VE/AB, CS/CO and CS/AB, VE/CU and CS/CU, and VE/AB and CS/AB (p < 0.05). Conclusions: The ${\mu}SBS$ values were affected by hybrid block type. All tested universal adhesive treatments can be used as an alternative to the control treatment for repair, except the AB system on VE blocks (the VE/AB group). The ${\mu}SBS$ values showed variation across different adhesive treatments on different hybrid CAD-CAM block types.

• Journal of Korean Neurosurgical Society
• /
• 제65권6호
• /
• pp.841-845
• /
• 2022

Objective : Chiari III malformations are extremely rare hindbrain malformations that are associated with a high early mortality rate, or severe neurologic deficits in the survivors. The treatment is early operative closure and cerebrospinal fluid diversion (CSF) shunting. Methods : We operated on 15 patients by repair and excision between July 2014 till June 2020 and retrospective data collection was done. Only one patient doesn't need ventriculoperitoneal (VP) shunt and the other 14 patients need a VP shunt. We described stepwise dissection and untethering of the cerebellum from the bony edge to regrowth and herniation of cerebellum again into this potential space and simple dural closure or repair with graft was done. Results : We started with VP in eight patients (53%) and the other seven patients (46.7%) started with excision and then six patients need VP shunt later on because four patients developed CSF leak and two patients developed increased high intracranial tension. Only four patients (26.7%) needed a blood transfusion. Conclusion : There are variations in the outcome and not all cases of Chiari malformation III will die and severe developmental delay is not a must. Proper management and repair carry a good prognosis.

• 약학회지
• /
• 제26권3호
• /
• pp.175-180
• /
• 1982

The intermediate of N'-nitrosonornicotine may bind to the guanine moiety of a G-C base pair. The hydrogen bond of the base pair may be broken and a new hydrogen bond can form between the intermediate and the guanine. It results in the "short" type of DNA repair.NA repair.