• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.629-632
• /
• 2008

In the concrete repairing industry, it's very significant to apply adequate repair materials and construction method in order to extend service life of deteriorated concrete structure efficiently. also, adequate diagnosis of deteriorated structure's status should be involved. This paper describes an investigation of bond strength of polymer modified mortar applied both old deteriorated concrete surface substrate and well cured new concretes. The purpose of this investigation is comparing how much the tensile bond strength on construction site is different from laboratory test results. in the results of investigation, most of sample tested in laboratory is in compliance with KS F 4042's specification. and most of results of construction site are not in compliance with the specification cause of low tensile strength of concrete's surface.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.2
• /
• pp.140-150
• /
• 2005

Maxillary sinus lifting procedure and bone grafting are used to reconstruct atrophic maxillae. These procedure are usually followed by the placement of endosseous dental implants. Different materials and techniques can be used for sinus bone grafting. Platelets are known to contain various growth factors involved in the repair of the vasculature and tissues, and it is known that the specialized platelet secretory granules, the alpha granules, contain platelet derived growth factor(PDGF), transforming growth factor-beta(TGF-beta), insuline like growth factor-I(IGF-I), epidermoid growth factor(EGF), and others. This study was to evaluate the effect of PRP on bone formation in a sinus bone grafting. Twelve rabbits were included in this randomized, blinded, prospective pilot study. In experimental group, sinus bone grafting with autobone and platelet rich plasma. In control group, sinus bone grafting with only autobone. Rabbits were sacrificed at 2nd, 4th, 8th, 12th weeks postoperatively. Clinical and radiographic tests, histological analysis were conducted to compare both sides. In clinical examination, there in no significant difference between experimental group and control group. But, in radiographic examination, a distinct incresed in the radiopaque of the PRP experimental group at 2nd and 4th weeks. The histologic examination revealed that more new bone formation and osteoblast activity were seen in experimental group at 2nd and 4th weeks. In conclusion, PRPs action in sinus bone grafting had a capacity of increased new bone formation in a early bone healing stage.

• Investigative Magnetic Resonance Imaging
• /
• v.20 no.4
• /
• pp.224-230
• /
• 2016

Purpose: The purpose of this study was to compare the grade of fatty degeneration and atrophy of rotator cuffs on immediate postoperative MRI to those on preoperative MRI in patients with rotator cuff tears. Materials and Methods: Seventy patients were included in this study, who received arthroscopic rotator-cuff repair and underwent both preoperative magnetic resonance imaging (MRI) and immediate postoperative MRI in our institution. Fatty degeneration of rotator cuffs and the atrophy of supraspinatus muscles were evaluated with T1 oblique sagittal images in the Y-shaped view. Fatty degeneration was evaluated using a Goutallier classification system, and the atrophy of supraspinatus muscles was evaluated using a modified tangent sign and a visual occupation ratio. Results: From 70 patients, a total of 100 tendons were repaired: 18, 69, and 13 tendons were treated for subscapularis, supraspinatus, and infraspinatus, respectively. The Goutallier grades (P = 0.012), modified tangent signs (P = 0.000), and visual occupation ratios (P = 0.000) of supraspinatus muscles were significantly decreased in immediate postoperative MRIs when compared to preoperative MRIs. In immediate postoperative MRIs, the Goutallier grades of supraspinatus muscles were decreased by one grade in 18.8% (n = 13) of the patients, and the atrophy of supraspinatus muscles was improved by one grade in 26.1% (n = 18) for modified tangent signs and 21.7% (n = 15) for visual occupation ratios. However, fatty infiltration by the Goutallier grades of subscapularis (P = 1.000) and infraspinatus (P = 0.157) muscles were not significantly changed after arthroscopic surgery. Conclusion: Immediate postoperative MRIs showed a significant improvement of fatty degeneration and muscle atrophy in supraspinatus muscles when compared to preoperative MRIs.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.4
• /
• pp.204-209
• /
• 2012

PURPOSE. The aim of this systematic review is to address treatment outcomes of Mandibular implant overdentures relative to implant survival rate, maintenance and complications, and patient satisfaction. MATERIALS AND METHODS. A systematic literature search was conducted by a PubMed search strategy and hand-searching of relevant journals from included studies. Randomized Clinical Trials (RCT) and comparative clinical trial studies on mandibular implant overdentures until August, 2010 were selected. Eleven studies from 1098 studies were finally selected and data were analyzed relative to number of implants. RESULTS. Six studies presented the data of the implant survival rate which ranged from 95% to 100% for 2 and 4 implant group and from 81.8% to 96.1% for 1 and 2 implant group. One study, which statistically compared implant survival rate showed no significant differences relative to the number of implants. The most common type of prosthetic maintenance and complications were replacement or reattaching of loose clips for 2 and 4 implant group, and denture repair due to the fracture around an implant for 1 and 2 implant groups. Most studies showed no significant differences in the rate of prosthetic maintenance and complication, and patient satisfaction regardless the number of implants. CONCLUSION. The implant survival rate of mandibular overdentures is high regardless of the number of implants. Denture maintenance is likely not inflenced substantially by the number of implants and patient satisfaction is typically high again regardless os the number of implants.

• Journal of Korean Foot and Ankle Society
• /
• v.6 no.2
• /
• pp.261-264
• /
• 2002

Purpose: To investigate the clinical features of fistulas of the ankle joints. Materials and Methods: Seven fistulas in seven patients were reviewed during Apr. 2000 to Mar. 2002, retrospectively. There are five men and two wemen. Average age was 47.7 years (range, 42-65 years). Average follow-up period was 1.4 years. There were six cystic lesions after ankle sprain and one patient with persistent discharge after excision of bursa over lateral malleolus. Results: Duration from injury to presentation was average 9.8 years. The site of preoperative swelling was mostly over the lateral malleolus in five patients. In one patient, the area of swelling was extended to the anterolateral ankle joint and in another patient there was extensive swelling from Achilles tendon to the anterolateral ankle joint. Concomitant symptoms were instability in three patients, pain and instability in three patients. Methods of surgery were simple repair in one, modified Brostrom in three, augmentation with periosteal flap in addition to modified Brostrom in two and Chrisman-Snook in addition to augmentation with periosteal flap and modified Brostrom in one. There were no recurrence of instability as well as fistula. Conclusion: We think that the fistula of the ankle joint should be included in the differential diagnosis of the cystic lesion over the lateral malleolus and the result of surgical treatment would be satisfactory in most cases.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.4
• /
• pp.593-607
• /
• 1994

The purpose of this study is to evaluate the effect of the bone morphogenetic protein, bone matrix gelatin and collagen matrix on the amount and shape of generating new bone adjacent to the implant. Implants were inserted in the mandible of adult dogs at 2 months after teeth extraction. Artificial bony defects, 3mm in width and 4mm in depth were made at the mesial and distal side of implant. Experimental groups were divided into three groups ; Group 1 : Defects filled with collagen matrix and bone morphogenetic protein, Group 2 : Defects filled with bone matrix gelatin. Control group : Defects filled with only collagen matrix. After implantation, the animals were sacrificed at 1,3,5 and 10 weeks for light microscopic examination. For the fluorescent microscopic examination. each tertracycline Hcl and calcein were injected at 1, 3, 5, 8 and 10 weeks after implantation. The results obtained were as follows : 1. The molecular weight of bovine BMP was about 18,100 by hydroxyapatite chromatography. 2. Osseointegration was observed in experimental groups 1 & 2, and BMG and BMP had an excellent bone forming capability as a filling materials to the repair of the bone defects. 3. The degree of healing of bone defect area, the experimental group 1 showed more prominent bone formation than control group, and the control group showed fibrous connective tissue between the implant and the bone. 4. In the fluorescent microscopic findings, bone remodelling was observed regenerative lamellar bone at defect area in experimental group 1, and partial remodelling in experimental group 2, In the control group, fibrous connective tissue was observed between the implant and bone surface and sign of remodelling was not apperaed. Above results suggest that BMP has rapid osteoinductive property and can be used clinically as a bone substitute on bone defects around implants.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.221-225
• /
• 2009

Purpose: For an isolated tear of the subscapularis tendon, the presented technique using a subclavian portal provides both a good angle for anchor placement and sufficient space for managing the upper portion of a subscapularis tendon tear. Materials and Methods: The conventional method needs 2 additional portals for traction, debriding the footprint and anchor fixation for repair. The presented technique requires only an anterior portal for suture management and a subclavian portal without cannula for suture anchoring and placement of suture hooks. Results: The two suture limbs of the anchor can be placed on the subscapularis tendon by the switching technique and these limbs are repaired sequentially. Conclusion: This technique is simple and reproducible and it can be applied to partial tears and minimally retracted subscapularis tears.

• Restorative Dentistry and Endodontics
• /
• v.42 no.3
• /
• pp.176-187
• /
• 2017

Objectives: This study aimed to evaluate the chemical and biological properties of fast-set white mineral trioxide aggregate (FS WMTA), which was WMTA combined with calcium chloride dihydrate ($CaCl_2{\cdot}2H_2O$), compared to that of WMTA. Materials and Methods: Surface morphology, elemental, and phase analysis were examined using scanning electron microscope (SEM), energy dispersive X-ray microanalysis (EDX), and X-ray diffraction (XRD), respectively. The cytotoxicity and cell attachment properties were evaluated on human periodontal ligament fibroblasts (HPLFs) using methyl-thiazoldiphenyltetrazolium (MTT) assay and under SEM after 24 and 72 hours, respectively. Results: Results showed that the addition of $CaCl_2{\cdot}2H_2O$ to WMTA affected the surface morphology and chemical composition. Although FS WMTA exhibited a non-cytotoxic profile, the cell viability values of this combination were lesser than WMTA, and the difference was significant in 7 out of 10 concentrations at the 2 time intervals (p < 0.05). HPLFs adhered over the surface of WMTA and at the interface, after 24 hours of incubation. After 72 hours, there were increased numbers of HPLFs with prominent cytoplasmic processes. Similar findings were observed with FS WMTA, but the cells were not as confluent as with WMTA. Conclusions: The addition of $CaCl_2{\cdot}2H_2O$ to WMTA affected its chemical properties. The favorable biological profile of FS WMTA towards HPLFs may have a potential impact on its clinical application for repair of perforation defects.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.496-498
• /
• 2010

Purpose: Lacerations requiring formal wound closure compose a significant number of all childhood injuries presenting to the emergency department. The problem with conventional suture technique are that suture removal is quite cumbersome, especially in children. Unwanted soft tissue damage can result in the process of suture removal, which calls for sedation, stressful for both medical personnel and child. The purpose of this study is to introduce the convenient suture technique for pediatric facial lacerations. Methods: Children under the age of four, presenting to the emergency department with facial lacerations were enrolled in the study. From March 2008 to June 2009, 63 patients (41 males and 22 females) with an average age of 1.4 years were treated with our convenient suture technique using utilized a loop suspended above a double, flat tie. Clean, tension free wounds were treated with our technique, wounds with significant skin defect and concomitant fractures were excluded. Results: The Patients were followed-up in 1, 3 and 5 days postoperatively. On the third hospital visit, suture removal was done by simply cutting the loop suspended above the wound margin and gently pulling the thread with forceps. There were no significant differences in the rates of infection and dehiscence compared with conventional suture technique. Conclusion: The use of our technique was to be simple with similar operative time compared with conventional suture technique. Removal of suture materials were easy without unwanted injuries to the surrounding tissue which resulted in less discomfort for the patient and greater parental satisfaction, minimized the complications. It can be considered as a viable alternative in the repair of pediatric facial lacerations.

• Journal of Fashion Business
• /
• v.12 no.3
• /
• pp.116-135
• /
• 2008

To investigate the actual distribution condition and clothing construction factors of the working clothes supplied to the Changwon national industrial complex, 5 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock in the industrial complex located in Gyeongsangnam-Do were selected. The questionnaire designed for the research consisted of working clothes distribution policies in manufacturing industry and the actual conditions of the design facts, repair and maintenance of the working clothes, etc. The analysis of the clothing construction factors of the working clothes provided by 5 respondent companies were conducted in parallel. The results derived from the study were as follows: The basic types of working clothes were the blouson jacket and straight pants; safety equipments for manufacture were safety helmets, gloves, snickers, goggles, masks, ear caps, wristlets, leggings, apron, etc. The size-charts adopted by the participant companies were the small-medium-large and cm/inch measurement size systems. To solve wearer's dissatisfaction with the garment fit, certain clothing construction factors were used, e.g. strap bands and the elastic band on a waist band. The types of fabrics used for the working clothes were mainly polyester/cotton and polyester/rayon blended ones. Moreover, to provide with more air permeability to wearers, the warp knit material was used to construct the lining and the armpit or back bodice slits. Lock, two-thread chain, safety, overedge stitches were applied with flat, lap felled, French, superimposed, lapped, bound and edge finishing seams to construct the working clothes selected.