• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.130-133
• /
• 2006

It is well-known that the resources for tide and tidal current energy are abundant in Korea. The south coast in Korea is recognized as one of the most appropriate places in the world for developing tidal current energy. The target site for harnessing tidal current energy is the Uldolmok, where the strongest tidal current in Korea occurs. In order to commercialize and industrialize the tidal current power generation, the construction of pilot tidal current power plant of 1MW has been started in April 2006, and is expected to be completed by May 2007. Extensive works including field investigation, field experiment for evaluating the efficiency of helical turbine and numerical analysis have been performed. This paper present the several design parameters for constructing the Uldolmok pilot tidal current power plant.

• Journal of Animal Science and Technology
• /
• v.57 no.11
• /
• pp.34.1-34.5
• /
• 2015

Himalayan dock (Rumex nepalensis) was evaluated for forage value and antinutrients under three, five and seven weeks cutting intervals in the temperate environment. Dry matter (DM) content was measured for each cutting interval. Forage quality parameters such as Crude Protein (CP), Acid Detergent fiber (ADF), Neutral Detergent Fiber (NDF), Calcium (Ca) and Phosphorus (P) were analyzed. Plants with seven weeks cutting interval gave higher DM yield. CP and P content were significantly higher for three weeks cutting intervals. Average CP contents were 31.38 %, 30.73 % and 27.32 % and average P content 0.58 %, 0.52 % and 0.51 % for three, five and seven weeks cutting intervals, respectively. Ca content did not differ significantly between cutting intervals. The average Ca content were 0.91 %, 0.90 % and 90 %, for three, five and seven weeks cutting intervals, respectively. Tannin and mimosine contents were not significantly different between cutting intervals. Average tannin contents were 1.32 %, 1.27 % and 1.26 % and mimosine 0.38 %, 0.30 % and 0.28 % for three, five and seven weeks cutting intervals, respectively. The study concluded that R. nepalensis could be a potential source of protein for livestock. The study also suggests seven weeks harvesting interval to provide plants with high dry matter yield, high forage quality and very low levels of anti-nutrients.

• Journal of Energy Engineering
• /
• v.20 no.2
• /
• pp.143-153
• /
• 2011

Offshore wind power(OWP) is one of the most promising renewable energy and gives higher output than onland one due to stronger and consistent wind in offshore. it offsets shortcoming of noise, spatial limit and less affects scenery, and can be built in larger size. Korea has plenty of offshore wind resources as it is surrounded by the sea in three directions. This review describes recent progress in offshore wind turbine and substructure technology. Market trend in local and overseas, Number of papers published and patents registered are analysed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.702-705
• /
• 2003

Forest by-product silage (FPS) comprised of foliage, shrubs, and wild grasses was prepared to examine feeding value as sole roughage source for spotted (sika) deer. This diet was compared with imported oak leaf hay (OLH) and a commercial mixed ration (CMR) in digestion balance trials with spotted deer. Dry matter intake was highest (p<0.05) on the OLH, whereas intakes of the FPS and CMR were similar (p>0.05). Digestibility of dry matter was highest (p<0.05) for CMR. Digestibility of crude protein was highest in CMR and lowest in OLH and there were significant differences (p<0.05) among diets. Average daily gain, digestible dry matter intake and digestibility of crude fiber did not differ significantly among diets. Nitrogen intake, urinary and digestible nitrogen were highest (p<0.05) in CMR. However, nitrogen retention was not significantly different. Consequently, FPS is a good roughage source for deer having high digestibility, dry matter intake and availability of nitrogen.

• Environmental Engineering Research
• /
• v.20 no.1
• /
• pp.33-39
• /
• 2015

Mercury is a toxic pollutants present in different types of industrial effluents and is responsible for environmental pollution. Removal of Hg(II) ions from synthetic wastewater was studied using the activated biocarbon produced from the leaves of Tridax procumbens (Asteraceae). The particle size of the biocarbon (BC) is in the range of $100-120{\mu}m$. The effects of initial metal ion concentration, pH, contact time, and amount of biocarbon on the biosorption process were studied at temperature of $28{\pm}2^{\circ}C$. Batch experimental studies showed that an equilibrium time of 160 min was required for the maximum removal of Hg(II) at the optimized biocarbon dose of 2.5 g per 100 mL of synthetic wastewater. The optimum pH required for maximum removal (96.5%) of Hg(II) ions was found to be 5.5. The biosorption of metal ions onto activated biocarbon surface is probably via an ion exchange mechanism. The biocarbon can be regenerated with minimum loss. Further, it can be reused without any chemical activation. The findings of the research suggested that, the biocarbon produced from cost effective renewable resources can be utilized for the treatment of industrial wastewater.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1468-1479
• /
• 2015

Renewable energy resources such as wind and photovoltaic power generation systems demand a high step-up DC-DC converters to convert the low voltage to commercial grid voltage. However, the high step-up converter using a transformer has limitations of high voltage stresses of switches and diodes when the transformer winding ratio increases. Accordingly, conventional studies have been applied to series-connect multioutput converters such as forward-flyback and switched-capacitor flyback to reduce the transformer winding ratio. This paper proposes new single-ended converter topologies of an isolation type and a non-isolation type to improve power efficiency, cost-effectiveness, and output ripple. The first proposal is an isolation-type charge-pump switched-capacitor flyback converter that includes an extreme-ratio isolation switched-capacitor cell with a chargepump circuit. It reduces the transformer winding number and the output ripple, and further improves power efficiency without any cost increase. The next proposal is a non-isolation charge-pump switched-capacitor-flyback tapped-inductor boost converter, which adds a charge-pump-connected flyback circuit to the conventional switched-capacitor boost converter to improve the power efficiency and to reduce the efficiency degradation from the input variation. In this paper, the operation principle of the proposed scheme is presented with the experimental results of the 100 W DC-DC converter for verification.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.46-57
• /
• 2007

The leachability of boron in zinc borate (ZB)-modified oriented strandboard (OSB) from southern wood species was investigated in this study. The leaching experiments were conducted by exposing edge-sealed OSB samples under running water at $31^{\circ}C$ for 8, 24, 72, and 216 h. The results from leached samples were compared with those from the unleached controls. Boron leaching of the modified OSB occurred upon the initial water exposure, and the leaching rate decreased as the leaching time increased. Initial boric acid equivalent (BAE) level, wood species, and sample thickness swelling significantly influenced the leachability. There was no consistent effect of polyethylene glycol (PEG) on zinc borate leaching. The glue-line washing within OSB due to thickness swelling of the test samples under water and decomposition of the borate to form water-soluble boric acid were thought to be two possible causes for the observed leaching. The relationship between assayed BAE and leaching time followed a decaying exponential function for zinc borate treated OSB. From the boron/zinc ratio after each leaching period, boron element in ZB was more or less leachable. The material constant of the regression models allowed comparing the leachability of the modified OSB for various wood species. An unified leaching method for treated wood composite materials is needed.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.171-178
• /
• 2011

During the last decades, global warming from the increased amount of greenhouse gases, mainly carbon dioxide has become a major political and scientific issue. Burning fossil fuels (natural gas, coal and oil) releases $CO_2$, which is also a major cause of global warming. Among the clean environment, wood pellets are considered as promising renewable fossil fuels because of clean burning characteristics, reduction of particulate and NOx emission from combustion. In Korea, more than 50% pellets have to be imported every year because of shortage of feedstocks. On the other hand, about 80% of wood pulps are greatly dependent upon overseas products due to limited forest resources. Under this situation, this study explored how efficiently we have to use forest biomass instead of total dependence on wood as raw materials for pellets.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.1
• /
• pp.183-192
• /
• 2011

In recent years there has been an increasing focus on global warming and the exhaustion of resources caused by the heavy consumption of fossil fuels. In order to resolve these issues, biomass has gained much attention as a source of renewable energy. One area of particular interest has been the production of biodiesel. The biodiesel produced by the transesterification of vegetable oils, animal fats and waste cooking oils is expected to be one of the eco-friendly biomass-based alternatives to fossil fuels. This paper reviews some of the recent findings for the effective biodiesel production system, together with several factors affecting the biodiesel yield.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.199-207
• /
• 2005

Hydrogen is getting more attention owing to the seriousness of air pollution and dependance on oil import, UNCCC(United Nations Convention on Climate Change) for reducing the emission of $CO_2$. This fact is not confined in a certain country but global recognition and several countries initiated R&D competition for commercializing the hydrogen fuel cell vehicle. Within 20${\sim}$30 years cost effective hydrogen production can be possible using fossil fuels because so much research is carried out up to now. But it is so far to produce the most of the hydrogen using renewable resources considering the present status of R&D and cost effectiveness. Several automobile companies planed for mass production of hydrogen vehicle by 2010 but changed or canceled the plan owing to the difficulty of R&D and the low status of infrastructure penetration. This paper surveyed the hydrogen energy policy, R&D program and commercialization strategy of advanced country, international agency, automobile and energy company to analyze the global status of R&D and policy. And the survey of R&D program is focused on the part of hydrogen production, storage, delivery and fuel cell.