• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.281-285
• /
• 2006

As the needs of wind energy increase, the more sites for the wind farm are required. As a part of searching for the prominent wind farm site, specially for offshore wind farm, we chose 4 sites along the southern part seashore of JeonNam province based on the analysis of the data gathered by meteorological observatory ud have gathered wind data for more than a year by use of 40m Met masts installed in the representative locations, ie. small islands of 4 different bay area. The siting for the Met masts were very limited by the geographical circumstances The wind data of those areas show a little lower annual average wind speeds, for the wind farm development, of 4m/s to 5.5m/s at the height of 40m above the ground level of the respective islands. The detail figures of one year wind data of those area are presented in this report.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.18-28
• /
• 2020

In this paper the authors provide comparative evaluation of current research that used liquefaction and pyrolysis method for bio-oil production from various types of biomass. This paper review the resources of biomass, composition of biomass, properties of bio-oil from various biomass and also the utilizations of bio-oil in industry. The primary objective of this review article is to gather all recent data about production of bio-oil by using liquefaction and pyrolysis method and their yield and properties from different types of biomass from previous research. Shortage of fossil fuels as well as environmental concern has encouraged governments to focus on renewable energy resources. Biomass is regarded as an alternative to replace fossil fuels. There are several thermo-chemical conversion processes used to transform biomass into useful products, however in this review article the focus has been made on liquefaction and pyrolysis method because the liquid obtained which is known as bio-oil is the main interest in this review article. Bio-oil contains hundreds of chemical compound mainly phenol groups which make it suitable to be used as a replacement for fossil fuels.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.564-568
• /
• 2007

Gas hydrate has been attractive topic for two dedicates because it may cause the global warming, ocean hazards associated with the instability of marine slope due to the gas hydrate release as well as high potential of future energy resources. The study on gas hydrate in Ulleung basin has been performed since 1999 to explore the potential and distribution of gas hydrate offshore Korea. The numerous multi channel seismic data have been acquired and processed by Korea Institute of Geosciences and Mineral Resources (KIGAM). The results showed clearly the gas hydrate indicators such as pull up structure, bottom simulating reflector (BSR), seismic blanking zone. The prestack depth migration has been considered as fast and accurate technique to image the subsurface. In this paper, we will present both the conventional seismic data processing and apply Kirchhoff prestack depth migration for gas hydrate data set. The results will be applied for core sample collections and for proposal more detail 2D with long offset or 3D seismic exploration.

• Journal of Environmental Science International
• /
• v.9 no.1
• /
• pp.49-55
• /
• 2000

An EMERGY analysis of the main energy flows driving the economy of humans and life support systems consists of environmental energies, fuels, and imports, all expresses as solar emjoules. Total EMERGY use(720.0 E20 sej/yr) of the Nakdong River Basin is 96 per cent from imported sources, fuels and goods and services. EMERGY flows from the environment such as rain and geological uplift flux accounted for only 4 percent of total EMERGY use. Consequently, the ratio of outside investment to attracting natural resources was large, like other industrialized areas. EMERGY use per person in the Nakdong River Basin indicates a moderate EMERGY standard of living, even though the indigenous resources are very poor. Population of 6.66 million people in 1996 is already in excess of carrying capacity of the basin. Carrying capacity for steady state based on its renewable sources in only 0.226 million people. EMERGY yield ratio and environment loading ratio were 1.07 and 28.52, respectively. EMERGY sustainability index, a ratio of EMERGY yield ratio to environment loading ratio, is therefore less than one, which is indicative of highly developed consumer oriented economies. This study suggests that the economic structure of the Nakdong River Basin should be transformed from the present industrial structure to the social-economic structure based on an ecological-recycling concept for the sustainable use of the Nakdong River.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1279-1280
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitized solar cells(DSC) have been very economical and easy method to convert solar energy to electricity. DSC can reach low costs in future outdoor power applications. However, to commercialize the DSC, there are still many shortages to overcome. When the DSC is commercialized in the near future, the productivity is an important factor. In the process of soaking in a dye, it usually takes 12${\sim}$24 hours. In this study, we varied the dye coloring temperature from 0$^{\circ}C$ to 60$^{\circ}C$. At the temperature of 40$^{\circ}C$, DSC cell showed the best performance. We also conducted the time variant experiment to reduce the manufacturing time. Counter electrode surface of DSC is deposited by RF magnetron sputtering under the conditions of Ar $2.8{\times}10^{-3}torr$, RF power of 120W and substrate temperature of 100$^{\circ}C$.

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.741-751
• /
• 2012

This article analyzes the interdependency between nonrenewable marine sand resources and renewable fishery resources by the developed dynamic bioeconomic model. The developed bioeconomic model is applied to a case study of efficient sustainable management for marine sand mining, which adversely affects a valuable blue crab fishery and its habitat in Korea. The socially-efficient extraction plan for marine sand and the time-variant environmental external costs to society in terms of diminished harvest rate of blue crab are determined. To take into account long-term effects from destroyed fishery habitat, a Beverton-Holt age structure model is integrated into the bioeconomic model. The illustrative results reveal that the efficient sand extraction plan is dynamically constrained by the stock size of the blue crab fishery over time. Thus, the dynamic environmental external cost is more realistic resource policy option than the classical fixed external cost for determining socially optimal extraction plans. Additionally, the economic value of bottom habitat, which supports the on- and off-site commercial blue crab fishery is estimated. The empirical results are interpreted with emphasis on guidelines for management policy for marine sand mining.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1093-1101
• /
• 2017

Microgrid as a unit component consisting a smart grid is an isolated system, which has a decentralized power supply system. This paper proposes an electrical isolation of the microgrid from the utiliy grid based on a power conditioning system, and also proposes an operation method maintaining the isolated state efficiently using diverse distributed energy resources such as renewable energy sources and energy storage system. The proposed system minimizes the influence of the grid connection on the internal load though a phase detection and synchrnoization to the utiligy grid and the microgrid can be stable even if the grid is failed.

• Journal of Korean Society of Forest Science
• /
• v.98 no.5
• /
• pp.513-523
• /
• 2009

Many species, cultivars, and hybrids in Populus have been introduced and developed by the scientists of Department of Forest Genetic Resources, Korea Forest Research Institute in Korea. P. alba ${\times}$ glandulosa, P. euramericana, P. nigra ${\times}$ maximowiczii, P. koreana ${\times}$ P. nigra var. italica, and P. davidiana have been studied from many aspects, i.e., genetics, breeding, physiology, propagation, silviculture, biomass production, biotechnology and phytoremediation. These precedent results will provide a sound basis for a newly-arising research on short-rotation coppice as one of renewable resources and phytoremediation plants. It was found that there were many promising varieties and clones for these purposes. However, minute analysis on specific gravity and caloric values for those plants should be followed under several silvicultural and rotational systems.

• Computers and Concrete
• /
• v.24 no.5
• /
• pp.453-458
• /
• 2019

Today, concrete remains the most important, durable, and reliable material that has been used in the construction sector, making it the most commonly used material after water. However, cement continues to exert many negative effects on the environment, including the production of carbon dioxide (CO2), which pollutes the atmosphere. Cement production is costly, and it also consumes energy and natural non- renewable resources, which are critical for sustainability. These factors represent the motivation for researchers to examine the various alternatives that can reduce the effects on the environment, natural resources, and energy consumption and enhance the mechanical properties of concrete. Geopolymer is one alternative that has been investigated; this can be produced using aluminosilicate materials such as low calcium (class F) FA, Ultra-Fine GGBS, and high calcium FA (class C, which are available worldwide as industrial, agricultural byproducts.). It has a high percentage of silica and alumina, which react with alkaline solution (activators). Aluminosilicate gel, which forms as a result of this reaction, is an effective binding material for the concrete. This paper presents an up-to-date review regarding the important engineering properties of geopolymer formed by FA and slag binders; the findings demonstrate that this type of geopolymer could be an adequate alternative to ordinary Portland cement (OPC). Due to the significant positive mechanical properties of slag-FA geopolymer cements and their positive effects on the environment, it represents a material that could potentially be used in the construction industry.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.296-296
• /
• 2015

The aim of this paper is to numerically explore the feasibility of designing a Mini-Hydro turbine. The interest for this kind of horizontal axis turbine relies on its versatility. For instance, in the field of renewable energy, this kind of turbine may be considered for different applications, such as: tidal power, run-of-the-river hydroelectricity, wave energy conversion. It is fundamental to improve the turbine performance and to decrease the equipment costs for achievement of "environmental friendly" solutions and maximization of the "cost-advantage". In the present work, the commercial CFD code ANSYS is used to perform 3D simulations, solving the incompressible Unsteady Reynolds-Averaged Navier-Stokes (U-RANS) equations discretized by means of a finite volume approach. The implicit segregated version of the solver is employed. The pressure-velocity coupling is achieved by means of the SIMPLE algorithm. The convective terms are discretized using a second order accurate upwind scheme, and pressure and viscous terms are discretized by a second-order-accurate centered scheme. A second order implicit time formulation is also used. Turbulence closure is provided by the realizable k - turbulence model. In this study, a mini hydro turbine (3kW) has been considered for utilization of horizontal axis impeller. The turbine performance and flow behavior have been evaluated by means of numerical simulations. Moreover, the performance of the impeller varied in the pressure distribution, torque, rotational speed and power generated by the different number of blades and angles. The model has been validated, comparing numerical results with available experimental data.