• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.188.2-188.2
• /
• 2010

북한은 자급자족의 형태로 지하자원과 수력을 이용하여 에너지원으로 사용하고 수입연료를 자제하는 실정이다. 하지만 기존의 발전 설비들의 노후화와 지하자원의 확보의 어려움이 증가 되어 신재생에너지의 개발을 확대하고 있다. 이에 우리나라에서는 남북의 기술교류 확대 및 미래 에너지 자원의 확보를 위하여 북한 자원자원에 대한 연구가 이뤄지고 있다. 기존의 연구에서는 북한지역의 관측값을 활용하거나 저해상도의 바람지도들이 작성되었다. 북한 지역의 바람의 분포를 세밀히 파악하기 위하여 기존의 바람지도 보다 상세한 풍력-기상자원지도가 필요하기 때문에 연구를 진행하였다. 북한의 풍력-기상자원지도를 개발하기 위해 미국 NCAR에서 개발한 중규모 모형인 WRF(Weather Research & Forcasting)을 활용하였다. 좋은 풍력자원을 갖춘 장소에 풍력 단지를 조성하기 위해서는 고해상도의 기상자원지도를 이용해서 파악하는 것이 필요하므로 해상도를 1km으로 설정하여 수행되었다. 본 연구의 결과로 지상 80 m에서의 1km 해상도를 갖는 풍력-기상자원지도를 작성하였다. 개발된 풍력-기상자원지도의 검증을 위해서 우리나라에서 확보가 가능한 북한 27개 지점의 지상 10 m 바람자료들을 활용하였다. 풍속에 대한 검증은 Bias와 RMSE을 이용하였으며, 풍향의 검증은 MAE을 활용하였다. 연 평균의 북한의 풍력-기상자원지도를 보면, 북한의 산맥을 중심으로 다른 지역보다 높은 풍속 분포를 보이고 있으며, 황해도를 포함한 북한의 서해안지역에서 비교적 높은 풍속의 분포를 나타내고 있다. 계절별로 살펴보면 봄철과 겨울철에 여름과 가을철보다 높은 풍력자원이 나타나며, 여름철이 가장 낮은 풍력자원을 갖는 것으로 분석되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.190.2-190.2
• /
• 2010

LIDAR는 레이저를 대기에 송출하여 미세먼지의 이동에 의한 도플러 위상차를 검출함으로써 3차원 풍속벡터를 측정하는 원격탐사 장비로, 한국에너지기술연구원은 국내최초로 WindCube LIDAR를 도입하여 운영 중에 있다. LIDAR의 장점은 이동성, 설치의 편리성 외에도 현재까지 풍황탑이 모든 범위를 측정하지 못한 풍력발전기 블레이드 회전면 최고 높이인 지면 150m 까지의 풍속분포를 상세하게 측정할 수 있다는 특장점이 있다. WindCube LIDAR는 총 10개의 측정 고도를 설정할 수 있으며 1Hz로 원시자료를 획득하여 10분 평균자료로 저장한다. 이러한 측정자료를 통하여 기존 기상탑에서 불가능하였던 풍속분포의 정확한 이해와 난류특성의 파악이 가능하게 되었으나 반대급부로 급증한 측정자료의 정리와 분석에 많은 시간과 노력이 필요하게 되었다. 이에 한국에너지기술연구원에서는 LIDAR 측정자료의 가공 및 분석에 편리성을 제공하기 위해 KIER-$LidarWind^{TM}$ 프로그램을 개발하였으며, 2차원 등치선도 및 3차원 풍속분포 그래프를 시각함으로써 입체적인 가공 및 분석이 가능하도록 하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.63.1-63.1
• /
• 2010

Since the solar energy resource is the main input for sizing any solar photovoltaic system and solar thermal power system, it is essential to utilize the solar radiation data as a application and development of solar energy system increase. It will be necessary to understand and evaluate the insolation data. The Korea Institute of Energy Research(KIER) has begun collecting horizontal global insolation data since May, 1982 at 16 different locations in Korea and for the more detailed analysis, Images taken by geostationary satellite may be used to estimate solar irradiance fluxes at earth's surface. It is based on the empirical correlation between a satellite derived cloud index and the irradiance at the ground. From the results, the measured data has been collected at 16 different stations and estimated using satellite at 23 different stations over the South Korea from 1982 to 2009. The Result of analysis shows that the annual-average daily global radiation on the horizontal surface is $3.56kWh/m^2/day$.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.919-926
• /
• 2009

Renewable energy or green energy is a hot issue in theses days. Since wind resource can be endlessly supplied by nature, researchers and common people are interested in study how to use that resource at home or company. Especially, many architects have tried to integrate wind power generator for a part of building. So in this paper, three buildings installed wind power turbine are targed to CFD analysis and these buildings are Bahrain trade center, Discovery tower, and Pearl river tower. Bahrain trade center is the first building installed real wind turbine, Discovery tower is constructing at Texas, and Pearl river tower is designed and proved by china researchers. These buildings have very different type of wind power turbine and each turbine has different conditions f3r best power generation. Therefor this paper will focus on characteristic shape of buildings, wind power turbine type, and expected purpose of construction. Moreover, CFD analysis will show wind flow pattern and wind speed while wind is passing through wind turbine of three tall buildings. CFD analysis for three buildings make comparison the wind flow patterns with experimental result.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.337-342
• /
• 2015

The company of 4 core materials that are needed for photovoltaic generation is located in area around this university in Gunsan, Saemangeum. And also, it was almost completed the value chain about the production of Polysilicon, Ingot, Wafer, modules and the design, construction of generation system. The industry-academy-government has understood that because of the relative companies' production and investment, it leads to a supply and demand of manpower and thus will have field centered manpower education. This program will help the problem of lack of manpower in relative companies by establishing competitive major agreement like vocational education system. Also, the university and the participating company in joint have pushed ahead field business education to make the least of industrial-education's mismatch, the training of professional manpower connected with related industries to make the universities chemical characteristics, companies securing excellent manpower and contributed to the revitalization of the regional economy. In this paper, are aware that photovoltaic industry is a future strategic industry for the country, so we will train the immediately site adapting manpower for the area of photovoltaic material and system as our goal. This is shown results of education operation for 4 years.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.8
• /
• pp.883-890
• /
• 2005

The industrial growth and the raised living quality have led to the massive energy consumption. As a result. the polluted environment and the limited amount of energy resources emerged as serious problems to be resolved in 21st century. Especially, in the case of Korea whose imported energy dependency rate is 98.2$\%$ in 2003 and constantly increasing every rear. more than 24$\%$ of overall energy consumption is for housing and commercial use. In order to cope with the shortage of natural energy resources, it is inevitable to develop alternative sustainable energy resources including seawater heat. so that they can replace existing resources. The heat transfer air velocity 3.5 m/s is proper to consideration with the body the pipe size 200A is more suitable than look due to the air velocity quantify and the ratio of pipe surface area. And the error between experimental data with simulation is below 5.34$\%$ so the suggested equation for calculating heat transfer capacity can be used. Therefore out of many methods utilizing seawater heat. this work Presents the efficiency of using sea water heat as a resource for air-conditioners which can be converted from the outside air through the air-to-heat conversion tube . Consequently. this method provides pretty reasonable energy efficiency.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.536-538
• /
• 2009

In recent day, many people are interested in wind resource for generation of electric power. Especially, it is made assessment the possibility of generation of electric power by wind resource originated from running cars and buses in downtown or highway. Moreover bus, driven in the exclusive lane, is focused on possibility of generation electric power on highway because median strip makes fast flow way between bus body and median strip and a pattern will appear in the flow way like drag coefficient. But nobody can guess whether the induced flow will increase or decrease and estimate amount of change of drag coefficient. Solving drag coefficient of bus running highway is the point of this paper. To solve this problem, we use the CFD method. The model is a bus simplified without mirror and gates. In order to assess result, the flow analysis surrounding the bus on the flat road where median strip is not installed has been compared with road with median strip. Solving condition is that the driving highway and median strip are running with 100km/h (27.8m/s).

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.463-466
• /
• 2009

The numerical simulation optimized by Four Dimensional Data Assimilation (FDDA) with Quick Scatterometer (QuikSCAT) data is carried out to evaluate wind resource characteristics at various heights in the southeastern area of the Korean Peninsula, where wind farms are planned to be built on on- and off-shore as well as comparable diurnal wind variations are characterized at the surface. The temporal and spatial distributions of modeled wind speeds showed good agreement with the observations based on the temporal variation analysis. Model results indicate that the higher model is performed in resolution, the more precise results is at turbine hub height. Occasionally, wind speed variations for each numerical resolution has a different regional and seasonal variations. In the coast area, hub height wind speed of 9km-resolution is simillar to that of 3km-resolution. On the other hand, hub height wind speed of 3km-resolution is simillar to that of 1km-resolution in the Jiri mountainous area.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.5-17
• /
• 2015

Purpose: The goal of this research is to identify the planning techniques of Smart Green City with Ubiquitous method and carbon-neutral city planning techniques and to induce the main planning techniques through the analysis of relative importance and practical adaptation. Method: First of all, eighteen planning techniques were derived and categorized into three organization systems and six sectors through literature review and FGI analysis considering the applicability of Ubiquitous service for carbon-neutral city planning techniques. Secondly, based on expert surveys and AHP analysis, the importance of Smart Green City planning techniques was evaluated. Thirdly, using case study, six cases related to Smart Green City were analyzed for the current status of application of planning techniques. Lastly, considering the importance of planning techniques and practical aspects, the characteristics of Smart Green City and its implication were estimated. Result: Energy, Resource and Waste and Transportation sector were identified as important sectors for Smart Green City. In addition, 'Construction of Smart Grid', 'System for Utilization of New & Renewable Energy', 'Smart Resource Circulation Management System', 'Establishment of Public Transportation Information System basis', 'Construction of Pedestrian / Bicycle oriented Road Environment' are essential planning techniques to create Smart Green City.

• Journal of Environmental Science International
• /
• v.9 no.3
• /
• pp.185-191
• /
• 2000

Sustainable development has been the key concept, both in economic policies and in environmental management since 1970s. In the view of systems ecology, sustainable resource use strategies are considered to be essential in achieving sustainable development. During the last three decades, the discipline of systems ecology has applied ecological energetic analysis to the evaluation of the contribution of natural environments to economic systems. ENERGY analysis of main energy flows driving the economy of humans and life support systems of a city was made including environmental energies, fuel, and inputs, all expressed as solar emjoules. Total EMERGY use of Pusan was 3.89 E22 sej/yr, about 90 percent of it was purchased sources from outside during eleven years from 1985 to 1995. EMERGY flows from the environment were less than 10 percent. EMERGY yield ratio and environmental loading ratio were 1.10 and 10.45, respectively. EMERGY sustainability index is there(ore less than one, which is indicative of highly developed consumer oriented economies. Development of a city has been achieved in the short run by the economic growth, but it can be sustained in the long run by the use of renewable resource systems.