• 콘크리트학회논문집
• /
• 제11권5호
• /
• pp.21-31
• /
• 1999

The companion paper presents an analytical model to predict behaviors of PSC-Beam bridges according to continuity of spans. This paper aims at providing several examples of its application to PSC-Beam bridge. In this regard, many uncertainties affecting to the continuity of spans (such as the ultimate shrinkage strain of slab and girders, the prestressing creep of girders, and the time adopting prestressing force) are analysis in detail. Moreover, to increase the serviceability and to remove th inherent structural defects including the cracking at interior supports, a necessity for the parametric studies of PSC-Beam bridges reflecting the construction sequence is emphasized.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.341-345
• /
• 2006

The GPS is widely used in various parts, therefore it is required higher integrity and continuity. These integrity and continuity are threatened by outer jamming signals which are intended or not. And various anti-jamming ways have been studied to remove these jamming signals. In this paper, we are going to test the efficiency of the anti-jamming algorithm in space and time-space domain, and analyze

• 한국콘텐츠학회논문지
• /
• 제12권5호
• /
• pp.1-9
• /
• 2012

디지털 음악과 스마트 폰이 대중화되면서 잡음에 강인한 실시간 음악 핑거프린트 시스템이 다양하게 개발되고 있다. 특히 핑거프린트 알고리즘 중 Multiple Hashing(MLH)은 잡음에 강인하고 정교한 구조로 되어 있다. 본 논문에서는 음악 데이터베이스로부터 질의 및 응답의 정확도를 개선하기 위해 에너지 집중필터를 사용하고 연속성과 중복성을 제거하는 통계적 필터를 제안한다. 에너지 집중 필터는 하위 비트에 에너지가 집중되는 Discrite Cosine Transform(DCT)의 특징을 이용하고, 통계적 필터는 검색된 핑거프린트 정보들 사이의 상관관계 특성을 이용한다. 실험 결과로 잡음 환경에서 에너지와 통계적 필터링으로 구성된 제안 알고리즘은 우수성을 보인다. 이는 제안된 필터 엔진으로 Philips Robust Hash(PRH)보다 잡음에 강인하고 Multiple Hashing(MLH)보다 간결한 핑거프린트 시스템을 구성할 수 있다.

• ETRI Journal
• /
• 제23권2호
• /
• pp.85-95
• /
• 2001

The surface modeling capability of CAD systems is widely used to design products bounded by free form surfaces and curves. However, the surfaces or curves generated by popular data fitting methods usually have shape imperfections such as wiggles. Thus, fairing operations are required to remove the wiggles, which makes the surfaces or curves smooth. This paper proposes a new method based on the wavelet transform for fairing the surfaces or curves while preserving the continuity with adjacent surfaces or curves. The wavelet transform gives a hierarchical perspective of the surfaces and the curves, which can be decomposed into the overall sweep and details, i.e., local deviations from sweep like the wiggles. The proposed fairing method provides a similar effect on the mathematical surface as that of the grinding operation using sandpaper on the physical surface.

• 충청수학회지
• /
• 제7권1호
• /
• pp.25-32
• /
• 1994

Let A be a (complex) Banach algebra. The object of the this paper shall be remove the continuity of the derivation in the recently theorems. We prove that every derivation D on A satisfying [D(a), a] ${\in}$ Prad(A) for all a ${\in}$ A maps into the radical of A. Also if ${\alpha}D^3+D^2$ is a derivation for some ${\alpha}{\in}C$ and all minimal prime ideals are closed, then D maps into its radical.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1639-1653
• /
• 2018

Bolted connections are suitable due to high quality prefabrication in the factory and erection in the workplace. Prefabrication and modularization cause high speed of erection and fabrication, high quality and quick return of investment. Their technical hitches transportation can be removed by prefabrication of joints and small fabrication of components. Box-columns are suitable members for bolted structures such as welded steel structures with moment frames in two directions etc., but their continual fabrication in multi-story buildings and performing the internal continuity plate in them will cause some practical dilemmas. The details of the proposal technique introduced here, is to remove such problems from the box columns. Besides, some other advantages include new prefabricated bolted beam-to-column connections referred to BBCC. This connection is a set of plates joined to columns, beams, support, and bolts. For a better understanding of its fabrication and erection techniques, two connection and one structural maquettes are made. The present work aims to study the cyclic behavior of connection numerically. To verify the accuracy of model, a similar tested connection was modelled. Its verification was then made through comparison with test results. The behavior of connection was evaluated for an exterior connection using three different support shapes. The effects of support shapes on rigidity, ductility, rotation capacity, maximum strength, four rad rotation strength were compared to those of the AISC seismic provision requirements. It was found that single beams support has all the AISC seismic provision requirements for special moment frames with and without a continuity plate, and box with continuity plate is the best support in the BBCC connection.

• 전자공학회논문지C
• /
• 제34C권9호
• /
• pp.22-32
• /
• 1997

This paper proposes an imprecise compuitation model for DCT considering QOS of images and a two dimensional DCT architecture for imprecise computations. In case that many processes are scheduling in a hard real time system, the system resources are shared among them. Thus all processes can not be allocated enough system resources (such as processing power and communication bandwidth). The imprecise computtion model can be used to provide scheduling flexibility and various QOS(quality of service)levels, to enhance fault tolerance, and to ensure service continuity in rela time systems. The DCT(discrete cosine transform) is known as one of popular image data compression techniques and adopted in JPEG and MPEG algorithms since the DCT can remove the spatial redundancy of 2-D image data efficiently. Even though many commercial data compression VLSI chips include the DCST hardware, the DCT computation is still a very time-consuming process and a lot of hardware resources are required for the DCT implementation. In this paper the DCT procedure is re-analyzed to fit to imprecise computation model. The test image is simulated on teh base of this model, and the computation time and the quality of restored image are studied. The row-column algorithm is used ot fit the proposed imprecise computation DCT which supports pipeline operatiions by pixel unit, various QOS levels and low speed stroage devices. The architecture has reduced I/O bandwidth which could make its implementation feasible in VLSI. The architecture is proved using a VHDL simulator in architecture level.

• Advances in pediatric surgery
• /
• 제7권2호
• /
• pp.137-141
• /
• 2001

Thyroglossal duct cyst is ectodermal remnant, which may develop along the line of descent of the thyroid gland from the foramen cecum of the tongue to the pyramidal lobe of the thyroid gland. Meticulous dissection of the cyst and duct, along with the body of the hyoid bone is necessary to avoid recurrence. Eighty-one patients with thyroglossal duct cyst treated at Hanyang University Hospital between January 1980 and December 2000 were reviewed to determine the incidence and to analyze the result of management. The male-to-female ratio was 1.4:1(47:34) with a male preponderance. They are most commonly present at 3-8years(54.2 %) of age, but rarely present at infancy. The most common symptom was a painless midline neck mass(76.5 %, 62cases). Eighty-one patients underwent modified Sistrunk operation without evidence of recurrence. Eight-nine percent(72 cases) of these lesions were located between thyroid substance and hyoid bone, and 11 %(9 cases) were above the hyoid bone. There were 22 infected cysts(27.2 %). The Sistrunk operation is a gold standard for treating the thyroglossal duct cysts. For best results in thyroglossal duct cyst surgery, one should make every effort to remove the cyst intact in continuity with the body of the hyoid bone. In our institute, Sistrunk operation modified by the authors showed a good result.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1950-1963
• /
• 1995

A modification of the approximate-factorization method is made to accelerate the convergency rate and to take sufficiently large Courant number without loss of accuracy. And a stable implicit finite-difference scheme for solving the incompressible Navier-Stokes equations employed above modified method is developed. In the present implicit scheme, the volume fluxes with contravariant velocity components and the pressure formulation in curvilinear coordinates is adopted. In order to satisfy the continuity condition completely and to remove spurious errors for the pressure, the Navier-Stokes equations are solved by a modified SMAC scheme using a staggered gird. The upstream-difference scheme such as the QUICK scheme is also employed to the right hand side. The implicit scheme is unconditionally stable and satisfies a diagonally dominant condition for scalar diagonal linear systems of implicit operator on the left hand side. Numerical results for some test calculations of the two-dimensional flow in a square cavity and over a backward-facing step are obtained using both usual approximate-factorization method and the modified one, and compared with each other. It is shown that the present scheme allows a sufficiently large Courant number of O(10$^{2}$) and reduces the computing time.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.140-148
• /
• 2000

In this paper, using surface micromachining technology with thick photoresist and aluminum, an SLM(Spatial Light Modulator), which is applied to the fields of adaptive optics and pattern recognition system, was fabricated and the electromechanical properties of the fabricated micro SLM are measured. In order to maximize fill-factor and remove mechanical coupling between micro SLM actuators, the micro SLM is composed of three aluminum layers so that spring structure and upper electrode are placed beneath the mirror plate, and $10\times10$ each mirror plate is individually actuated. Also, the micro SLM was designed to be able to modulate phase and amplitude of incoming light in order to have a continuity of phase modulation of incoming light. In the case of amplitude and phase modulation, maximum vertical displacement is 4$\mum$, and maximum angular displacement is $\pm4.6^{\corc}$ respectively. The height difference of the fabricated mirror plate was able to be reduced to 1100A with mirror plate planarization method using negative photoresist(AZ5214). The electromechanical properties of the fabricated micro SLM were measured with the optical measurement system using He-Ne laser and PSD(position sensitive device).