• 한국물환경학회지
• /
• 제26권4호
• /
• pp.585-589
• /
• 2010

In order to evaluate the performance of a powdered activated carbon (PAC) contactor, two water treatment plants (WTP) were selected as target sites. The result of tracer tests showed that the plug flow portion of a bisymmetry-type contactor (H WTP) was more than 70%. A maze-type contactor (C WTP) also had more than 70% of plug flow portion after intra-basin baffles were installed. According to the operating data of the target WTPs, there was no clear evidence that the addition of PAC contributed to the removal of organics. However, the results of jar tests, conducted with the raw water taken from the H WTP, proved that PAC could remove dissolved organic carbon (DOC) to some extent when the proper velocity gradient was maintained. It was estimated that the production rate, defined as the ratio of the operating flowrate to the design flowrate, of the C and H WTPs was only 27 and 50%, respectively. Because of these lower production rates, the mixing intensity in the contactor was much less than the designed value and, finally, the performance of the PAC contactor was much lower than what was expected.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.196-203
• /
• 2002

Generally, non-uniformity and removal rate are important factors on measurements of both wafer and die scale. In this study, we verify the effects of the pressure and relative velocity on the results of the chemical mechanical polishing and the effect of pattern density on inter layer dielectric chemical mechanical polishing of patterned wafer. We suggest an appropriate modeling equation, transformed from Preston\`s equations which was used in glass polishing, and simulate the removal rate of patterned wafer in chemical mechanical polishing. Results indicate that the pressure and relative velocity are dominant factors for the chemical mechanical polishing and pattern density effects on removal rate of pattern wafers in die scale. The modeling is well agreed to middle and low density structures of the die. Actually, the die used in Fab. was designed to have an appropriate density, therefore the modeling will be suitable for estimating the results of ILD CMP.

• Nuclear Engineering and Technology
• /
• 제16권2호
• /
• pp.80-88
• /
• 1984

Thriethylenediamine(TEDA)주입 활성탄층에 의한 공기중의 methyliodide 제거 메카니즘이 조사되었다. 실험 결과, 공기 유속이 20cm/sec 이상일 때는 기공확산이 율속 단계였으며, 10cm/sec 일때는 기공확산 저항과 외부 물질 전달 저항이 모두 총괄 물질 전달 저항에 기여하였다. 공기중 수증기가 존재하지 않는 건조 조건하에서의 TEDA 함침 탄소층의 성능을 묘사하기 위한 흡착 모델이 제안되었다. 계산된 값은 실험 결과와 잘 일치하였다.

• 한국환경과학회지
• /
• 제8권2호
• /
• pp.221-225
• /
• 1999

This study was conducted to evaluate the treatment efficiency including reaction kinetics and hydraulic characteristics of food processing wastewater by using an ejector-type aeration system (ETAS) in activated sludge process. The oxygen transfer efficiency in ETAS can be changed in accordance with the depth of reactor. However, the optimum air velocity was found less than 1.82 m/hr at a superficial liquid velocity of 634 m/hr. The ETAS process showed higher organic material removal efficiency than that of the existing activated sludge process under hydraulic detention time 6 to 12 hours. This process, which can maintain MLVSS highly, is able to have high organic material removal efficiency at short HRT and deal with variable organic material loading.

• 상하수도학회지
• /
• 제31권6호
• /
• pp.577-586
• /
• 2017

One of the major sources causing eutrophication and algal blooms of lakes or streams is phosphorus which comes from point and nonpoint pollution sources. HAP (hydroxyapatite) crystallization using granular alkaline materials can achieve the decrease of phosphorus load from wastewater treatment plants and nonpoint pollution control facilities. In order to induce HAP crystal formation, continuous supply of calcium and hydroxyl ions is required. In this research, considering HAP crystallization, several types of lime-based granular alkaline materials were prepared, and the elution characteristics of calcium and hydroxyl ions of each were analyzed. Also, column tests were performed to verify phosphorus removal efficiencies of granular alkaline materials. Material_1 (gypsum+cement mixed material) achieved the highest pH values in the column tests consistently, also, Material_2 (gypsum+slag mixed material) and Material_3 (calcined limestone material) achieved over pH 9.0 for 240 hours (10 days) and proved the efficiencies of long-term ion supplier for HAP crystallization. In the column tests using Material_3, considerable pH increase and phosphorus removal were carried out according to each linear velocity and filtration depth. T-P removal efficiencies were 87.0, 84.0, 68.0% and those of PO4-P 100.0, 97.0, 80.0% for linear velocity of 1.0, 2.5, 5.0 m/hr respectively. Based on the column test results, the applicability of phosphorus removal processes for small-scale wastewater treatment plants and nonpoint pollution control facilities was found out.

• 한국환경농학회지
• /
• 제15권2호
• /
• pp.232-238
• /
• 1996

폐수(廢水) 중(中) 암모니아태(態) 질소(窒素)를 zeolite column을 이용(利用)하여 제거(除去)할 경우 그 제거효율(除去效率)을 높이기 위한 zeolite column의 적정조건(適正條件)을 조사(調査)하였다. 암모니아태(態) 질소(窒素) 용액(溶液)의 column 투과속도(透過速度), 유입수(流入水)의 농도(濃度) 및 분취회수(分取回數)가 증가(增加)할수록 제거효율(除去效率)은 감소(減少)하였다. Zeolite첨가량(添加量)이 증가(增加)할수록 암모니아태(態) 질소(窒素)의 제거효율(除去效率)은 증가(增加)하였으나, column의 직경(直徑)이 커질수록 그 효율(效率)은 감소(減少)하였다. 암모니아태(態) 질소(窒素)의 제거효율(除去效率)에 미치는 요인(要因)들을 다중회귀분석(多重回歸分析)한 결과(結果) zeolite의 첨가량(添加量), 투과속도(透過速度), 용액(溶液)의 첨가농도(添加濃度) 및 분취회수(分取回數)와 제거효율(除去效率) 간에는 고도(高度)의 유의성(有意性)이 인정(認定)되었으나, column의 직경(直徑)과는 유의성(有意性)이 인정(認定)되지 않았다. Column의 직경요인(直徑要因)을 제외(除外)한 변수(變數)들에 대한 회귀식(回歸式)은 암모니아태(態) 질소(窒素)의 제거효율(除去效率)(%) = $0.620\;{\times}\;zeolite$의 양(量) $-0.456\;{\times}$ 투과속도(透過速度)$-0.212{\times}$ 용액(溶液)의 첨가농도(添加濃度)$-3.038{\times}$ 분취회수(分取回數)+100.1로 나타났다. 회귀식(回歸式)에 의한 제거효율(除去效率) 리논치(理論値)와 실제 축산폐수(畜産廢水)의 투과실험결과(透過實驗結果)인 실험치(實驗値)는 거의 일치(一致)하는 것으로 나타났다.

• 수산해양기술연구
• /
• 제51권4호
• /
• pp.545-552
• /
• 2015

The main object of this study is to investigate the collection characteristics of an electro-static multi-staged impaction system, experimentally. The experiment is carried out to analyze the characteristics of pressure drop and collection efficiency for the present system with the experimental parameters such as the inlet velocity, stage number, applied voltage and shape of discharge electrode, etc. In results, the pressure drop is shown below $148mmH_2O$ lower than that of the conventional bag filter at inlet velocity 3.46 m/s and 5 stage. For 5 stage, the collection efficiencies are to be 97.4, 99.0% with the applied voltage 0 kV at the inlet velocity 2.07, 3.46 m/s, while 98.4, 99.9% with 40 kV of a sharp edge discharge electrode. Additionally, the present system is to be considered as an effective compact system for a removal of particulate pollutants from marine diesel engines due to much higher collection efficiency and appropriate pressure drop.

• Journal of Microbiology and Biotechnology
• /
• 제26권2호
• /
• pp.373-384
• /
• 2016

The membrane-aerated biofilm reactor (MABR) is a promising municipal wastewater treatment process. In this study, two cross-flow MABRs were constructed to explore the carbon and nitrogen removal performance and bacterial succession, along with changes of influent loading shock comprising flow velocity, COD, and NH₄-N concentrations. Redundancy analysis revealed that the function of high flow velocity was mainly embodied in facilitating contaminants diffusion and biosorption rather than the success of overall bacterial populations (p > 0.05). In contrast, the influent NH₄-N concentration contributed most to the variance of reactor efficiency and community structure (p < 0.05). Pyrosequencing results showed that Anaerolineae, and Beta- and Alphaproteobacteria were the dominant groups in biofilms for COD and NH₄-N removal. Among the identified genera, Nitrosomonas and Nitrospira were the main nitrifiers, and Hyphomicrobium, Hydrogenophaga, and Rhodobacter were the key denitrifiers. Meanwhile, principal component analysis indicated that bacterial shift in MABR was probably the combination of stochastic and deterministic processes.

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.18-26
• /
• 2007

The transport and removal characteristics of cobalt ions were investigated in a continuous electrodeionization with cation exchange textile (CEDI-CET). It was shown that the removal properties of cobalt ions are strongly dependent on the operating parameters such as temperature, flow velocity, and the solution pH. The transport and removal of cobalt ions was mainly related to the sorption on the surface and the convection and electro-migration through the ion exchange medium. In this study, the CEDI-CET showed good process performance for the removal of metal ions compared with the conventional CEDI with resins.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.2110-2117
• /
• 2003

A physics-based material removal model in various scales is described and a feature scale simulation for a chemical mechanical polishing (CMP) process is performed in this work. Three different scales are considered in this model, i.e., abrasive particle scale, asperity scale and wafer scale. The abrasive particle and the asperity scales are combined together and then homogenized to result in force balance conditions to be satisfied in the wafer scale using an extended Greenwood-Williamson and Whitehouse-Archard statistical model that takes into consideration the joint distribution of asperity heights and asperity tip radii. The final computation is made to evaluate the material removal rate in wafer scale and a computer simulation is performed for detailed surface profile variations on a representative feature. The results show the dependence of the material removal rate on the joint distribution, applied external pressure, relative velocity, and other operating conditions and design parameters.