• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.392-402
• /
• 2020

This paper proposes a solar tracking system without photo-sensors. The system can be classified into four modules: Solar Tracking, MPPT, ESS, and Real-Time Monitoring. Nine solar panels, as a basic unit, are adopted with grid structures of different heights to reduce wind influence and to enable solar tracking without photo-sensors. The low-cost MCU implements MPPT method which generates PWM switching signal for boost converter. The unit of ESS consists of three-series and four-parallel lithium-ion batteries in order to enable monitoring for abnormalities in temperature and electrical characteristics of battery. Four MCUs used in the system consists of two AVR Atmega128, and two Raspberry PI, and they exchanges operation informations. Experimental results of the proposed system show the solar tracking performance, the possibility of on-site and remote monitoring and the convenience of maintenance based on IoT technology.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.920-930
• /
• 2012

In this paper, we designed and built a wired temperature controller system which is based on ASIC for a wireless temperature controller system based on FPGA. FPGA devices and wireless controller systems are growing quickly especially for industrial systems for sensing temperature and humidity. FPGA can set up a desired system and a CPU, and directly set up or change a peripheral device based on an IP quickly for an affordable price. This wireless system is easy to install in the field where there are lots of changes and the system is complex. It also has advantages for maintenance. In this study, we are using a 32 bit RISC CPU based on MicroBlaze, with a touch interface, peripheral device, and porting the embedded Linux. Also, we added wireless communication using ZigBee. With this system we provide remote monitoring and control through the web by adding a web server. Compared to the original system, we say not only a performance improvement, but also more efficient development and cheaper costs. In this study, we focused especially on building a better development environment and a more effective user interface.

• Journal of Korea Multimedia Society
• /
• v.21 no.3
• /
• pp.358-368
• /
• 2018

The mobile characteristics of the smart phone are well suited to on-the-site oriented services and are being utilized in a variety of ways. However, since most applications operate on a central server basis, Internet access is inevitable, and there are various problems such as an increase in server maintenance cost and security deterioration. Although researches have been proposed to utilize the smart phone itself as a server to improve it, these methods are based on downsizing the PC-based web server or modifying the smart phone kernel. These methods have the problems that a end user has to use the rooting, and they are not able to effectively utilize various communication means of a smart phone. In this paper, we propose a design and implementation of an application level smart phone web server. The server receives the document request from the remote via the Internet and in the local area using the WPAN. At this time, the web document is stored as an internal file structure of the smart phone application. We proposed the phttp protocol which uses server's phone number as ID for document request. Through the implementation, we analyzed the capacity and latency of stored data and its effectiveness is evaluated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.827-832
• /
• 2002

The development of dedicated network management system is essential to meet the following conditions: the system must run the configuring and repair processing for the dedicated communication network, and can manage new next generation data dedicated communication network of various types. In general it is effective that the system is consisted of decentralized module to be accessible for business logic and datum to remote area. To solve these problems, a method is to use object-oriented design techniques. That is, it is to abstract reusability objects and make component module using the abstracted objects. In this paper, we propose a management system of dedicated communication network service using object-oriented design techniques which are UML(Unified Modeling Language).

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.327-334
• /
• 2009

The tiled-display system provides a high resolution display which can be used in different applications in co-working area. The systems used in the co-working field usually save the user logs, and these log information not only makes the maintenance of the tiled-display system easier, but also can be used to check the progress of the co-working. There are three main steps in the proposed tiled display log recorder. The first step is to capture the screen shots of the tiles and send them for merging. The second step is to merge the captured tile images to form a single screen shot of the tiled-display. The final step is to encode the merged tile images to make a compressed video stream. This video stream could be stored for the logs of co-working or be streamed to remote users. Since there could be differences in capturing time of tile images, the quality of merged tiled-display could be degraded. This paper proposes a time stamp-based metric to evaluate the quality of the video stream, and a merging algorithm that could upgrade the quality of the video stream with respect to the proposed quality metrics.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.2
• /
• pp.21-39
• /
• 1992

Many problems were found out the remarkable unbalance between paddy fields and up-land areas, or between plain and mountainous areas, unreasonable establishing of land consolidaton boundaries without consideration of rural development, lower leverl of construction technology of the roads and canals for agricultral use ad operation and maintenance of them by human power far apart from the ages of high technology, high information and free internationalisation, and too slow progress to overcome the weak agricultural circumstances etc. through the survey in the past executed land consolidation projects. The basic ways for solution of these problems for propulsion of land consolidation project through investigation are summarized as follows : 1. Land consolidation project should be executed to the direction of balanced regional development, laying stress on the upland and mountainous areas in order to carry out the agriculture effectively. 2. the acreage of land consolidation project to be conducted anually should be increased to overcome the serious underdeveloped agricultural development. 3. It should be developed to the way in accordance with the order of land use from the view point of rural integral development including the rural readjustment. 4. The level of the structures of road and canal, the size of standard lot and the grouping of land substitution should be to incraese the productivity of land and labour more than ever and reached to a degree in cope with the age of industrialization, information and free internationalisation. 5. The level of the management of agricultural water use and the maintenace of the various facilities should be developed to be automatization, remote control, central control and information processing instead human work. 6. Land substitution should take a measure of grouping method in accordance with the agricultural plan and farming organization, which can overcome high industrialized society in place of the substition by origin land. 7. Land consolidation project should be planned in order to fulfil a conservative function of ecosystem and resources together with improvement of land and labour productivity.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2016

In this paper, for the improvement of quality of service(QoS) performance of heterogeneous networks, multi-cell scheduling is proposed. In order to implement the proposed algorithm, for the recognition of the impact on the throughput performance of users, macro-pico-cells that form distributed architecture were proposed. In operating heterogeneous networks, considering the centralized structure, a macro-RRH(Remote Radio Head) deployment scenario was proposed. For interference mitigation of the proposed system, by applying the optional sub-frame, through CQI(Channel Quality Indicator) measurement for each sub-frame period, constraint conditions were measured according to system situations. For the simplification, the pattern of the same ABS muting was assumed. In the above two multi-cell environments, the algorithm of high-speed load balancing maintenance was proposed.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.209-222
• /
• 2020

The purpose of this paper is to predict the future changes of housing through the Delphi technique. The targets to predict were set by housing type, housing space, housing demand, and architectural technology. The results were as follows: ① The influences of social and value perspectives on the change of housing type, space, and demand would be high, on the other hands, the influence of political perspective would be low. ② In terms of housing type, the increase in demand for downsizing housing for high-rise buildings and the possibility of realizing remote medical support services and homecare using big data are highly predicted. That is, ③ it is anticipated that IoTs will have a significant influences on future housing changes, and ④ enactment of co-housing and related laws by the sharing economy, services for maintenance through the supply of high-rise and high-density homes, housing support for residents, and advanced lease markets by developed architectural technology are expected as anticipated forms of future housing.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.305-311
• /
• 2016

If the automated image calibration system is performed in the position of non-experts, an expert will be required in every case inefficiently. But this requires an expert only when absolutely necessary. As well as the rapid system operation and efficient workforce can be managed. Image correction to perform projector inspection and management skills and to filter SW plug-in correction is that special theater system maintenance is not only managed efficiently, but also combined image analysis techniques can improve the technical perfection. This paper is to minimize the economic loss by developing a 10-bit High-depth and high-resolution $360^{\circ}$ projection image analysis technique and is to development of the special theater calibration system to effectively support quality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.992-995
• /
• 2015

In this paper, we developed the computer room environments and infrastructure management systems to operate various networking devices and the infrastructure in the room, stably. The developed systems are composed of the computer room environment management system and the computing infrastructure management system. The computer room environment management system performs the role which the temperature and humidity detection node periodically detects the temperature and humidity and transmits the information to the remote intelligent server. The computing infrastructure management system enables the computer room's manager to check the information and maintenance history of the computing devices with a smart device supporting NFC(Near Field Communication).