• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.365-370
• /
• 2004

The integration of intelligent devices, devices-level networks, and software into motor control systems can deliver improved diagnostics, fast warnings for increased system reliability, design flexibility, and simplified wiring. Remote access to motor-control information also affords an opportunity for reduced exposure to hazardous voltage and improved personnel safety during startup and trouble-shooting. This paper presents LonWorks fieldbus networked intelligent induction control system architecture. Experimental bed system with two inverter motor driving system for controlling 1.5kW induction motor is configured for LonWorks networked intelligent motor control. In recent years, MCCs have evolved to include component technologies, such as variable-speed drives, solid-state starters, and electronic overload relays. Integration was accomplished through hardwiring to a programmable logic controller (PLC) or distributed control system (DCS). Devicelevel communication networks brought new possibilities for advanced monitoring, control and diagnostics. This LonWorks network offered the opportunity for greatly simplified wiring, eliminating the bundles of control interwiring and corresponding complex interwiring diagrams. An intelligent MCC connected in device level control network proves users with significant new information for preventing or minimizing downtime. This information includes warnings of abnormal operation, identification of trip causes, automated logging of events, and electronic documentation. In order to show the application of the multi-motors control system, the prototype control system is implemented. This paper is the first step to drive multi-motors with serial communication which can satisfy the real time operation using LonWorks network.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.314-316
• /
• 1994

The operation of RC(Rod Consolidation) technology carry out highly radiation environment. It requires remote operation and automation for efficient handling and for minimizing radiation exposure to the operator. So we investigated up and down position control of shock absorber device in RC system. To verify the research experimentally, a RC system was set up and PI control method was applied. Fuzzy control method was also tested to further improve control behavior.

• Journal of Biosystems Engineering
• /
• 제39권3호
• /
• pp.194-204
• /
• 2014

Purpose: The aim of this study was to develop long-term storage technology for Chinese cabbage in order to extend the period of availability of freshly harvested products. The scope of the paper deals with the use of a cooler with a remote monitoring and control interface in conjunction with use of packaging film. Methods: A cooler with a real time monitoring system was designed as a low-temperature storage facility to control temperature and relative humidity (RH). The effects of storage in high-density polyethylene (HDPE) plastic boxes, 3% chitosan dipping solution, polypropylene film (PEF) with perforations, and mesh packaging bags on physiological responses were investigated. The optimal storage temperature and humidity for 120 days were below $0.5^{\circ}C$ and 90%, respectively. Physiological and biochemical features of cabbage quality were also analyzed: weight loss, texture, and sugar salinity, chlorophyll, reducing sugar, and vitamin C contents. Results: The cooler with a remote monitoring and control interface could be operated by an HMI program. A $0.5^{\circ}C$ temperature and 90% humidity could be remotely controlled within the cooler for 120 days. Postharvest freshness of Chinese cabbages could be maintained up to 120 days depending on the packaging method and operation of the remote monitoring system. In particular, wrapping the cabbages in PEF with perforations resulted in a less than a 5% deterioration in quality. This study provides evidence for efficient performance of plastic films in minimizing post-harvest deterioration and maintaining overall quality of cabbages stored under precise low-temperature conditions with remote monitoring and a control interface. Conclusions: Packaging with a modified plastic film and storage in a precisely controlled cooler with a remote monitoring and control interface could slow down the physiological factors that cause adverse quality changes and thereby increase the shelf life of Chinese cabbage.

• 드라이브 ㆍ 컨트롤
• /
• 제10권2호
• /
• pp.7-12
• /
• 2013

In this study, a wire/wireless communication system transmitting the operation data of engine from the ER (Engine Room) to the engine controller of ECR(Engine Control Room) has been developed through the communication of ISM(Industrial Science Medical) Band for the test operation environment improvement of medium speed engine. This wire/wireless communication system is composed of the RTU (Remote Terminal Unit) gathering and transmitting engine data as well as the MCU (Master Control Unit) receiving engine status information from the RTU to be sent to the engine controller (PLC). Through this study, a trial product of RTU and MCU has been manufactured. A test bench that has made temperature, pressure and pick-up sensor into a module for the local test of prototype was produced a test bench. In addition, at the same time save the data to a Web server and the smart phone real-time monitoring system has been developed using Wi-Fi communications. The ultimate objective of this study is to develop a wireless smart phone monitoring system of engine for the operator of engine to be able to monitor and control engine status even from the outside of engine room and control room based on this study.

• 산업경영시스템학회지
• /
• 제37권1호
• /
• pp.33-40
• /
• 2014

Air compressor is an important facility with electric power in the industry. However, because of the noise and vibration of air compressor and is installed outside the building management difficulty. In this study, MCP (Micro Control Processor) to remote monitoring of the air compressor via the compressed air through improved quality and allows stable maintenance were designed. So, increase the productivity improvement of energy-saving effect can be obtained. Remote real-time information stored on your PC to manage air compressor equipment was higher reliability. Monitoring system is developed in this study was applied to embedded systems. It is easy to install air compressor, and low maintenance costs was to raise the economic impact.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1696-1702
• /
• 2008

This paper proposes a voltage compensation device direct control strategy to realize the distributed, autonomous voltage control of the distribution system, which based on voltage data collected from customers of the remote site under the ubiquitous-based distribution system. In the proposed method, The ULTC and the SVR(Step Voltage Regulator)s compensate autonomously the voltage for self-compensation area based on the voltage data furnished from the ubiquitous device of customers. Also, the SVRs overcome the limit of single-operation of ULTC by the interlocking operation with the ULTC and enhance the voltage compensation capability for the customer. In particular, an optimization design method and a fuzzy design method are compared to determine the effective control method of the voltage compensator under the ubiquitous-based on-line operation environments. In fuzzy method, the tap of voltage compensator is defined as output member. Finally, the proposed two methods are implemented in Visual C++ MFC, the effectiveness is proved by simulation based on the worst virtual voltage data. Also, an optimal voltage compensation strategy is determined under on-line environments based on analyzed results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2471-2474
• /
• 2003

This paper focuses on the stability and operability of a man-machine system considering a human operator. Some papers' main interest has been the stability only, but the operability such as fatigue is also the other main interest. In a man-machine system, feelings such as motional, visual, and kinesthetic are important since those enable operators to work easily or fatigue operators. A model of a man-machine system has been developed. Motional, visual, and kinesthetic feelings may be considered as feedbacked sensor signals. We also have quantified the degree of fatigue with respect to reference operation. This is a performance index to be optimized. Several methods are presented to optimize the degree of fatigue and the stability of the integrated system. Examples are presented to show that the usefulness of the proposed modeling method and fatigue mitigating algorithm.

• 한국정보통신학회논문지
• /
• 제10권8호
• /
• pp.1495-1501
• /
• 2006

본 논문은 TFT 칼라 터치 LCD(liquid crystal display)를 사용한 홈 자동화 원격 제어 시스템 개발을 제안한다. 이 혁신적이고 인간공학적인 디자인, LCD와 하드웨어 버튼의 올바른 조합을 가지고 원격 제어하며 또한 이것의 산업 선도적 기술을 홈 엔터테인먼트의 최첨단 부분을 수요자에게 공급한다. 일시적 사용자를 위한 원격제어는 다양하고 자유로운 매크로와 적외선 명령어를 가지고 자동적으로 프로그래밍 되어졌다. 라디오 주파수 명령은 50-100인치 정도의 벽 및 문을 통하여 조작되어진다. 편집기는 수많은 브랜드의 AV 관련 제품들에 대한 IR 코드에 맞게 방대한 라이브러리를 포함한다. 이 데이터베이스는 매달 새 장치 포함하여 지속적으로 추가된다. 라이브 업 데이트를 지원함으로 최신 버젼의 소프트웨어를 유지할 수 있다. 소프트웨어 제거 및 설치하는 것을 대신하여 인터넷에서 소프트웨어를 다운로드 및 업 데이트를 할 수 있다.

• 디자인학연구
• /
• 제20권3호
• /
• pp.235-246
• /
• 2007

이 연구는 가정에서 그 중요성이 증가하고 있는 통합리모콘을 좀 더 쉽게 사용할 수 있도록 디자인하기 위한 것이다. 이러한 목적을 달성하기 위한 방법으로 대중성 있는 기존 제품의 UI체계를 통합리모콘의 UI체계로 적용하여 학습이 용이하고 사용성이 향상된 가정용 통합리모콘 UI디자인 대안을 개발하고 그 사용 용이성을 평가하는 연구를 진행하였다. 기존의 대중성 있는 제품으로는 UI디자인 개발 대상인 스틱형 통합리모콘과 사용방법이 유사한 휴대폰을 선정하였다. 선정한 휴대폰 UI의 공통적 특성을 도출하여 그 내용을 최대한 적용한 가정용 스틱형 통합리모콘의 디자인 안을 제작하였다. 플래시로 제작한 이 디자인 대안의 프로토타입으로 2회의 파일럿 테스트를 실시하여 최종 실험연구용 프로토타입 제작과 관련된 개선내용을 추출 하였다. 그리고 물리적인 조작, 피드백 측면에서의 사용 실제감을 보완한 버튼 프로토타입을 제작하여, 20대 대학생 41명을 대상으로 개발된 가정용 스틱형 통합리모콘의 새로운 UI디자인에 대한 사용성 평가를 진행하였다. 실험 결과 대중성 있는 기존 제품의 UI를 활용한 가정용 스틱형 통합리모콘은 사용성 향상에 기여할 수 있는 것으로 나타났으며 이 연구내용은 향후 가정용 스틱형 통합리모콘의 새로운 UI디자인 개발 연구의 좋은 모델이 될 수 있다고 판단된다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.209-214
• /
• 2002

We developed a small, remote controlled observation ship that can reduce the cost of gathering data for marine and coastal environments. The control system is composed of three microprocessors, one is for overall mission control, another for control of propulsion motors, and the other for sensor operation. For communication system, we adopt direct and indirect methods based on the wireless modem of commercial cellular telephone. The former is a direct communication between the modems of the ship and the server, and the latter is an indirect communication via internet between the ship and the server. The performance of the ship is demonstrated with the results produced by sets of experiments.