• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1315-1318
• /
• 2003

Wastewater treatment processes are usually located in the outskirts of cities. But these processes should be dealt with continuous maintenance by expert operators. Therefore, in this paper, unmaned and automated control system is designed for the SBR(Sequencing Batch Reactor) plant. This plant is constructed in Gimhae city. Networks and wireless modules are employed for the data transmission. A local controller is in the SBR plant as a client and a monitoring system is located in the other place as a server. Remote control and monitoring system are constructed at the laboratory of ours. Measured data from plant sensors are translated to the remote site using communication modules, and then the data could be displayed and analyzed by means of remote monitoring and control systems.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.2
• /
• pp.133-138
• /
• 2002

In this paper, we propose an integrated GUI environment of parallel fuzzy inference system fur pattern classification of remote sensing data. In this, as 4 fuzzy variables in condition part and 104 fuzzy rules are used, a real time and parallel approach is required. For frost fuzzy computation, we use the scan line conversion algorithm to convert lines of each fuzzy linguistic term to the closest integer pixels. We design 4 fuzzy processor unit to be operated in parallel by using FPGA. As a GUI environment, PCI transmission, image data pre-processing, integer pixel mapping and fuzzy membership tuning are considered. This system can be used in a pattern classification system requiring a rapid inference time in a real-time.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.333_335
• /
• 2009

It is expected, in the near future, that the use of distributed generation systems should be increased considerably. In this case, distance relay algorithm should be developed in the manner that it can reduce the error due to the in-feed effect. This paper presents a method to consider the fault current rushed from the remote end of a line. In the steady-state, the relays in both ends exchange the voltages of upper nodes. If a fault is perceived, the relay calculates fault location taking the fault current from the remote end by using voltage data of the remote ends obtained just before the fault. Even though this method has inevitable error, it can show more precise fault allocation. The suggested method is applied to a typical transmission system with two power sources in both ends to verify its effectiveness.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2762-2764
• /
• 2005

In this paper, we study the robot controller design using the voice and data communication via CDMA(Code Division Multiple Access) mobile communication network. We design the robot remote controller using the three methods, telephone call speech recognition, DTMF (Dual Tone Multiple Frequency) realization, SMS(Short Message Service) transmission/reception way via CDMA mobile communication network. We investigate the validity and effectiveness of the proposed remote controller which applied to the mobile robot.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.749-752
• /
• 2005

In this paper, we introduce an Intersection Collision Avoidance (ICA) system as a convergence example of Telematics and USN technology and show several requirements for the ICA system. Also, we propose a system design that satisfies the requirements of reliable vehicular data acquisition, real-time data transmission, and effective intersection collision prediction. The ICA system consists of vehicles, sensor nodes and a base station that can provide drivers with a reliable ICA service. Then, we propose several technological solutions needed when implementing the ICA system. Those are about sensor nodes deployment, vehicular information transmission, vehicular location data acquisition, and intersection collision prediction methods. We expect this system will be a good case study applied to real Telematics application based on USN technology.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.4
• /
• pp.632-638
• /
• 2012

ZigBee network, based on PHY, MAC layer provides a specification for a suite of high level communication protocols using small, low-power digital radio based on an IEEE 802.15.4 standard. Meshing is a type of daisy chaining from one device to another. This technique allows the short range of an individual node to be expanded and multiplied, covering a much larger area. Each wireless technology that makes it to market serves a special purpose or function. Zigbee provides short-range connectivity in what is called a personal-area network (PAN). Within ZigBee PAN coordinator as manages an entire ZigBee network, the short range of frequency band was only selected because the technology allows typically less than 100 kbp or ZigBee troubles in retransmission processing and delaying data tranmission works to create unproductive condition of work. This research was proposed the method, based on short range frequency of zigBee nodes enable to long range of remote data transmission with specific algorithm tools.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.118-118
• /
• 2000

This paper suggests the methodology to guarantee the rea1-time service over Ethernet and TCP/IP and to solve the problems such as re-transmission due to collision and platform-transparency and independence. This paper proposes a new mechanism called Real-time Ethernet protocol combined the centralized medium control mechanism with the token passing mechanism. The centralized medium control mechanism is used to get the token, the right to transmit the data, and the token passing mechanism is used to return the token to the token controller and to transmit data within the specified time interval. The proposed Real-Time Ethernet Protocol is based on Java and Java RMI(Remote Method Invocation). The presented protocol is believed to work enough in real-time applications considering latency occurred due to the Java RMI, which is less small than data transmission time.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.4
• /
• pp.327-335
• /
• 2000

The spent fuel rod extracting machine is automatically operated in high radioactive environment, so high reliability of operation is required. In this paper, to enhance the reliability of this machine by providing a close monitoring capability. a real time graphic simulation method is suggested. This method utilizes conventional IGRIP (Interactive Graphics Robot Instruction Program) 3D graphic simulation tool to visualize and simulate the 3D graphic model of this machine. Also, the dedicated protocol is defined for transmission of the operational data of the machine. The real time graphic simulation is realized by developing the socket module between a graphic workstation and a machine control computer through the TCP/IP network and by dividing the 3D graphic simulation GSL(Graphic Simulation Language) program as a small sized sub routine. The suggested method is implemented while automatically operating the rod extracting machine. The result of implementation shows that the real time 3D graphic simulation is well synchronized with the actual machine according to the operational data.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.4
• /
• pp.1-7
• /
• 2013

This paper presents the AMR (Automatic Meter Reading) system using the binary CDMA (Code Division Multiple Access) radio technology. The binary CDMA is the new radio technology in domestic research. Main implementation topics includes the binary CDMA remote meter reading system, the wireless piconet configuration for the wireless automatic meter reading, and the transmission scheduling for sending and receiving data. Also, the wireless packet data encryption is very important topics for the wireless automatic meter reading. The proposed AMR system is implemented as a pilot project in Jeju and Gangwon. It can be seen that the wireless remote reading using the binary CDMA wireless technology can be applied to the AMR system.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.475-478
• /
• 2004

The DCSU performs satellite payload data acquisition and storage functions before sending the data to the ground station. While imaging, the DCSU makes a file per each input channel and store into memory stack. For the successful imaging mission, proper DCSU mission parameters should be uploaded before the mission such as file name, file size, output channel for the download transmission and so on. This paper will describe the DCSU recording mechanism and some notices that might be helpful for the ground operators.