• Restorative Dentistry and Endodontics
• /
• v.1 no.1
• /
• pp.26-32
• /
• 1975

After a vital pulpotomy in dogs' teeth, the responses of the remaining pulp tissue under hydroxides (calcium hydroxide, magnesium hydroxide, aluminium hydroxide and zinc hydroxide) were studied histologically. The class V cavities were prepared on the teeth and the pulp was amputated. Each hydroxide was placed over the amputated tissue and the cavity was sealed with zinc oxide eugenol cement. Animals were sacrificed after 3 days, 1, 2, and 3 weeks following the operation. The teeth were decalcified, sectioned and stained with hematoxylin and eosin. Microscopic examination reveals as follows; 1. Calcium hydroxide: Inflammatory change was seen in the superficial portion of the remaining pulp tissue at the 3rd day and 1st week. The incompleted calicified material began to be deposited from the canal wall at the 2nd week, and the advanced calcified material was seen at the 3rd week. 2. Magnesium hydroxide: Severe inflammatory change was seen in the superficial portion of the remaining pulp from the 3rd day and the 1st week samples. Inflammatory change was decreased at the 2nd week and the slight calcified material was deposited from the root canal at the 3rd week. 3. Aluminium hydroxide: Severe inflammatory changes were seen in the remaining pulp tissue, the blood vessel was dilated, and the odontoblasts were destroyed at the 3rd day and 1st week. The fibrous degeneration spread to the apex at the 2nd week. There was no evidence of newly formed odontoblasts or deposition of calcified material underneath aluminium hydroxide. 4. Zinc hydroxide: The micrscopic picture was destructive. A thick necrotic layer was found under the amputated surface at the 3rd day and 1st week. Granulation tissue formation as well as chronic inflammatory changes extended to the apical area in the pulp tissue. Also there were no sign of odontoblastic formation or calcified material at the 2nd and 3rd week.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.441-443
• /
• 2008

A non-vacuum process for fabrication of $CuInSe_2$ (CIS) absorber layer from the corresponding Cu, In solution precursors was described. Cu, In solution precursors was prepared by a room temperature colloidal route by reacting the starting materials $Cu(NO_3)_2$, $InCl_3$ and methanol. The Cu, In solution precursors were mixed with ethylcellulose as organic binder material for the rheology of the mixture to be adjusted for the doctor blade method. After depositing the mixture of Cu, In solution with binder on Mo/glass substrate, the samples were preheated on the hot plate in air to evaporate remaining solvents and to burn the organic binder material. Subsequently, the resultant CI/Mo/glass sample was selenized in Se evaporation in order to get a solar cell applicable dense CIS absorber layer. The CIS absorber layer selenized at $530^{\circ}C$ substrate temperature for 30 min with various Se gas evaporation temperature was characterized by XRD, SEM, EDS.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.12
• /
• pp.3071-3095
• /
• 2013

Configuring optimization of wireless sensor networks, which can improve the network performance such as utilization efficiency and network lifetime with minimal energy, has received considerable attention in recent years. In this paper, a cross layer optimal approach is proposed for multi-source linear network and grid network under Rayleigh block-fading channels, which not only achieves an optimal utility but also guarantees the end-to-end reliability. Specifically, in this paper, we first strictly present the optimization method for optimal nodal number $N^*$, nodal placement $d^*$ and nodal transmission structure $p^*$ under constraints of minimum total energy consumption and minimum unit data transmitting energy consumption. Then, based on the facts that nodal energy consumption is higher for those nodes near the sink and those nodes far from the sink may have remaining energy, a cross layer optimal design is proposed to achieve balanced network energy consumption. The design adopts lower reliability requirement and shorter transmission distance for nodes near the sink, and adopts higher reliability requirement and farther transmission distance for nodes far from the sink, the solvability conditions is given as well. In the end, both the theoretical analysis and experimental results for performance evaluation show that the optimal design indeed can improve the network lifetime by 20-50%, network utility by 20% and guarantee desire level of reliability.

• Journal of Plant Biology
• /
• v.29 no.4
• /
• pp.295-315
• /
• 1986

Structure and differentiation mechanism of the seed coat of Panax ginseng are studied with light and electron microscopes to clarify the developmental processes of seed coat and the structural changes during the differentiation of the seed. The seed coat of ginseng is differentiated from the inner cell layers of ovary wall, which can be compared with the seed coat differentiated from integument(s) in other plants. The single integument is differentiated into endothelium, which is degenerated to one layer of 4${\mu}{\textrm}{m}$ in thickness, composed of remants of cell wall components in fully ripened seed. The ripened seed coat is composed of three layers; fringe layer, inner layer and palisade layer, and all of the them are crossed at right angles with one another. This may be the cause of protection of the kernel from other mechanical injuries. The thickness of fully ripened seed coat is about 300~600 ${\mu}{\textrm}{m}$, and arrangements of sclereids are irregular. However, the raphe region of seed coat is thin about 200 ${\mu}{\textrm}{m}$ in thickness and sclereids in that region are arranged regularly. This is the important cause for the cleavage of the seed coat during post-maturation process. The vascular bundles on the raphe are still remaining after sarcocarps are removed, and one of the branches of vascular bundles entered into the seed coat through the hilum and extended to chalazal region. During post-maturation process, the supply of water being necessary for growth of embryo may be accompolished by the vascular bundles entered into the seed coat through the opened hilum.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1221-1224
• /
• 2013

The atomic layer deposition (ALD) of $ZrO_2$ was conducted in ultrahigh vacuum (UHV) conditions. The surface was exposed to $ZrCl_4$ and $H_2O$ in sequence and the surface species produced after each step were identified in situ with X-ray photoelectron spectroscopy (XPS). $ZrCl_4$ is molecularly adsorbed at 140 K on the $SiO_2$/Si(111) surface covered with OH groups. When the surface is heated to 300 K, $ZrCl_4$ loses two Cl atoms to produce $ZrCl_2$ species. Remaining Cl atoms of $ZrCl_2$ species can be completely removed by exposing the surface to $H_2O$ at 300 K followed by heating to 600 K. The layer-by-layer deposition of $ZrO_2$ was successfully accomplished by repeated cycles of $ZrCl_4$ dosing and $H_2O$ treatment.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.44.4-45
• /
• 2020

The solar chromosphere can be observed well through strong absorption lines. We infer the physical parameters of chromospheric plasmas from these lines using a multilayer spectral inversion. This is a new technique of spectral inversion. We assume that the atmosphere consists of a finite number of layers. In each layer the absorption profile is constant and the source function is allowed to vary with optical depth. Specifically, we consider a three-layer model of radiative transfer where the lowest layer is identified with the photosphere and the two upper layers are identified with the chromosphere. This three-layer model is fully specified by 13 parameters. Four parameters can be fixed to prescribed values, and one parameter can be determined from the analysis of a satellite photospheric line. The remaining eight parameters are determined from a constrained least-squares fitting. We applied the multilayer spectral inversion to the spectral data of the Hα and the Ca II 854.21 nm lines taken in a quiet region by the Fast Imaging Solar Spectrograph (FISS) of the Goode Solar Telescope (GST). We find that our model successfully fits most of the observed profiles and produces regular maps of the model parameters. We conclude that our multilayer inversion is useful to infer chromospheric plasma parameters on the Sun.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.7
• /
• pp.9-16
• /
• 1998

The nput impedance of a patch-tupe dipole antenna for GPR is calculated by using the moment methods in case that the surrounding medium is modeled on a multi-layer structure consisting of lossy dielectircs. When the cone-type function equivalent to pulse basis function in employed, one of the double integration can be performed analytically. The remaining integration is excuted numerically in a finite rnage and analytically in asymptotic region. The current distributions and input impedances of those antennas are calculated numerically.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.203-208
• /
• 2002

This paper deals with turning experiments of aluminium alloy using a single crystal diamond with round cutting edge. A face cutting was conducted using a special precision machine to study the characteristic phenomena in heavy cutting of aluminium alloy. In many cases, one of the most important matter on the surface integrity is about a damaged layer remaining just under the surface after machining. A machined surface roughness can be improved at a small geometrical surface roughness under special cutting conditions, even if a steady vibration exists between a tool and a workpiece.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.5080-5097
• /
• 2017

Channel characteristics-based secret key generation is an effective physical-layer security method. The issues of how to remove the effect of random noise and to balance the key generation rate (KGR) and the bit mismatch rate (BMR) are needed to be addressed. In this paper, to reduce the effect of random noise and extract more secret bits, a new quantization scheme with high key generation rate and low bit mismatch rate is proposed. In our proposed scheme, we try to use all measurements and correct the differences caused by noise at the boundary regions instead of simply dropping them. We evaluate and discuss the improvements of our proposed scheme. The results show that our proposed scheme achieves lower bit mismatch rate as well as remaining high key generation rate.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.109-112
• /
• 2007

To determine design or remaining life of flexible pavement, tensile strain at the bottom of asphalt concrete course and vertical strain on top of subgrade should be estimated. Various computer programs can be used for determining the strain at the critical position in pavement. However, these are conducted under the assumptions of full bonded or unbound state of layer interface conditions. This study compares the output of finite element analysis and multi-layer elastic analysis as vertical load was applied to the surface of flexible pavement. It is noted that the pavement performance is significantly affected depending upon the interface conditions.