• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.175-182
• /
• 2010

The paper presents a novel algorithm for face and iris detection with the application for driver iris monitoring. The proposed algorithm consists of the following major steps: Skin-color segmentation, facial features segmentation, and iris positioning. For the skin-segmentation we applied a multi-layer perceptron to approximate the statistical probability of certain skin-colors, and filter out those with low probabilities. The next step segments the face region into the following categories: eye, mouth, eye brow, and remaining facial regions. For this purpose we propose a novel segmentation technique based on estimation of facial class probability density functions (PDF). Each facial class PDF is estimated on the basis of salient features extracted from a corresponding facial image region. Then pixels are classified according to the highest probability selected from four estimated PDFs. The final step applies the circular Hough transform to the detected eye regions to extract the position and radius of the iris. We tested our system on two data sets. The first one is obtained from the Web and contains faces under different illuminations. The second dataset was collected by us. It contains images obtained from video sequences recorded by a CCD camera while a driver was driving a car. The experimental results are presented, showing high detection rates.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.76-81
• /
• 2011

A new via cutting structure in 2-layer DRAM package substrate has been fabricated to lower its power distribution network(PDN) impedance. In new structure, part of the via is cut off vertically and its remaining part is designed to connect directly with the bonding pad on the package substrate. These via structure and substrate design not only provide high routing density but also improve the PDN impedance by shortening effectively the path from bonding pad to VSSQ plane. An additional process is not necessary to fabricate the via cutting structure because its structure is completed at the same time during a process of window area formation. Also, burr occurrence is minimized by filling the via-hole inside with a solder resist. 3-dimensional electromagnetic field simulation and S-parameter measurement are carried out in order to validate the effects of via cutting structure and VDDQ/VSSQ placement on the PDN impedance. New DRAM package substrate has a superior PDN impedance with a wide frequency range. This result shows that via cutting structure and power/ground placement are effective in reducing the PDN impedance.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.1
• /
• pp.7-11
• /
• 2006

Since ceramic layers coated on machinery components inevitably experience the changes in their properties it is necessary to evaluate the characteristics of ceramic coating layers nondestructively for a reliable use of coated components and 4heir remaining life prediction. To address such a need, in the present study, an ultrasonic backward radiation technique is applied to investigate the characteristics of leaky Rayleigh surface waves propagating through the very thin TiN ceramic layers coated on AISI 1045 steel or austenitic 304 steel substrate with three different conditions of surface roughness, coating layer thickness and wear condition. In the experiments performed in the present work, the peak angle and the peak amplitude of ultrasonic backward radiation profile varied sensitively according to three specimen preparation renditions. in fact, this result demonstrates a high possibility of the ultrasonic backward radiation as an effective tool for the nondestructive characterization of the resting layers even in such a thin regime.

• 한국해양학회지
• /
• v.8 no.1
• /
• pp.9-21
• /
• 1973

When industrial wastewater containing fluoride runs into the ocean, approximately 0.1ppm of F$\^$-/ will react with seawater and will be eventually lost, and the remaining F$\^$-/ can be determined withe the ALC. Therefore F$\^$-/ is eligible to be used as a tracer of pollutant which contains fluoride. Determination of F$\^$-/ in the seawater with the Dotite reagent, Alfusone, has been made by the following method: To 10 ml of water sample, 1 ml of buffer solution (pH=4.0), 8 ml of acetone, and 1ml of 10% Alfusone were added and diluted to 25ml with distilled water. After 20 minutes the absorbance at 620 nm against a reagent blank was measured. The distributions of F$\^$-/ in Jinhae Bay has been made on the basis of water samples collected from 103 different sampling stations occupied in Jinhae Bay. The water samplings, three in the spring tide and two in the neap tide, were taken from surface layer during the flood and ebb tide periods respectively. The average concentration of F$\^$-/ in the bay, except the area to which the wastewater runs off from the Chemical plant, was 1.45 ppm(1.07-6.33ppm), and that of F$\^$-/ in the plant effluent was 330ppm, occasionally up to 562 ppm. Thus high levels of F$\^$-/ in the bay are strongly correlated to the amount of effluent from the plant, and waters of Jinhae Bay contains at least 0.13% of the plant effluent.

• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.710-717
• /
• 1998

The pH changes in 3 cavities prepared at the facial inner dentin and lingual outer dentin of the cervical portion and apical portion of roots filled with calcium hydroxide containing sealers were investigated. 50 extracted permanent teeth with single canal were instrumented with step-back method. An irrigant of 5% NaOCl was used between files. Then 3 small cavities were prepared. The cavity of apical portion and inner dentin cavity of coronal portion was cut a distance of about 1.0mm from the canal wall and outer dentin cavity of coronal portion was cut to a depth of about 0.5mm from root surface. 10 teeth of control group was not filled. 20 teeth were not flushed with 17% EDTA before using root canal sealers and then divided into 2 groups obturated with Sealapex and Apexit. The remaining 20 teeth were flushed with 17% EDTA and 5% NaOCl to remove smear layer and divided into 2 groups obturated with Sealapex and Apexit. The pH change of the dentin in each cavity was measured at 0, 1, 3, 5, 7, 15, 30 days with pH microelectrode(WPI Co., USA). The results were as follows: 1. The groups obturated with Sealapex and Apexit(calcium hydroxide based-sealers) have no increase in the pH level at root dentin. And there is no significant difference in pH level between groups obturated with Sealapex and Apexit(P>0.05). 2. Differences in pH levels between the treated and untreated groups with EDTA were not significant(P>0.05). 3. There is no significant difference in pH level between apical and cervical dentin, inner and outer dentin throughout the duration of the experiment(P>0.05).

• Applied Microscopy
• /
• v.34 no.1
• /
• pp.23-29
• /
• 2004

In this study, we introduce the structural analysis of amorphous silica nanoparticles by EF-TEM electron diffraction and in-situ heating experiments. Three diffused rings were observed on the electron diffraction patterns of initial silica nanoparticles, while crystalline spot patterns were gradually appeared during the insitu heating process at $900^{\circ}C$. These patterns indicate the basic unit of $SiO_4$ tetrahedra consisting amorphous silica and gradual crystallization into the ideal layer structure of tridymite by heating. Under high vacuum condition in TEM, SiO nanoparticles were redeposited on the carbon grid after evaporation of SiO gas from $SiO_2$ above $850^{\circ}C$ and the remaining $SiO_2$ were crystallized into orthorhombic tridymite, consistent with ex-situ heating results in furnace at $900^{\circ}C$.

• Journal of Conservation Science
• /
• v.33 no.1
• /
• pp.17-24
• /
• 2017

Studies were conducted on manufacturing techniques by applying microscopy and conservation treatments on the annals of Joseon dynasty storage box at the National Museum of Korea. The results revealed that lime tree wood(Tilla spp.) was used to make the annals of Joseon dynasty storage box. Lacquering techniques were used to coat the box with a layer of lacquer and bone ash and then cover it with traditional Korean paper. After being covered with traditional Korean paper, more layers were applied in the following sequence: mud ashes, black lacquer, pure lacquer, and black lacquer. Before conservation treatments, some components and lacquer layers were missing in addition wood joint were loose. Therefore, conservation and restoration should be conducted based on the identified wood and by observing the shape of the remaining components.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.2
• /
• pp.120-126
• /
• 2013

Preserving the pulp is important in the treatment of carious pulp exposure in young permanent teeth. Pulpotomy is a vital pulp therapy in which a portion of the coronal pulp tissue is surgically removed, and the remaining radicular tissue is covered with suitable material that protects the pulp from further injury and permits and promotes healing. It is important to develop biocompatible treatment directed at maintaining pulp vitality and increasing tooth longevity. Platelet-rich fibrin (PRF) has been referred to as a second-generation platelet concentrate. Two clinical cases in which PRF was applied as a medicament after pulpotomy of an immature permanent tooth are presented. After isolation, caries removal and pulpotomy with PRF was performed. A layer of mineral trioxide aggregate (MTA) was placed over the PRF, and the final restoration was performed. Postoperatively, the patient had no pain or discomfort, and follow-up radiographs revealed normal periodontal ligament space and trabecular bone pattern.

• Korean Journal of Food Science and Technology
• /
• v.11 no.2
• /
• pp.77-80
• /
• 1979

Effects of interfering substances on the determination of L-ascorbic acid (AsA) in green tea and it's extracts by 2,4-dinitrophenylhydrazine (DNP) method was studied. and the removal of these interfering substances was also investigated. Under the condition prescribed for DNP method, AsA content of green tea are effected by some sugar, reductones, dicarbonyl compounds, organic acids, amino acids and others. All interfering substances except amino acids were eliminated by the chloroform extraction after adding o-phenylendiamine to sample solution. and remaining amino acids were eliminated almost completely by the treatment with ion exchange resin$(Amberlite{\;}IR-120H^{+})$. After removing the interfering substances by the above mentioned procedure, total AsA in green tea was determined by DNP method. The values obtained by this method were in good agreement with those by thin layer chromatography (TLC) method. and the method was more rapid and simple than TLC method.

• Restorative Dentistry and Endodontics
• /
• v.41 no.2
• /
• pp.114-120
• /
• 2016

Objectives: The aim of this study was to compare the push-out bond strength and dentinal tubule penetration of root canal sealers used with coated core materials and conventional gutta-percha. Materials and Methods: A total of 72 single-rooted human mandibular incisors were instrumented with NiTi rotary files with irrigation of 2.5% NaOCl. The smear layer was removed with 17% ethylenediaminetetraacetic acid (EDTA). Specimens were assigned into four groups according to the obturation system: Group 1, EndoRez (Ultradent Product Inc.); Group 2, Activ GP (Brasseler); Group 3, SmartSeal (DFRP Ltd. Villa Farm); Group 4, AH 26 (Dentsply de Trey)/gutta-percha (GP). For push-out bond strength measurement, two horizontal slices were obtained from each specimen (n = 20). To compare dentinal tubule penetration, remaining 32 roots assigned to 4 groups as above were obturated with 0.1% Rhodamine B labeled sealers. One horizontal slice was obtained from the middle third of each specimen (n = 8) and scanned under confocal laser scanning electron microscope. Tubule penetration area, depth, and percentage were measured. Kruskall-Wallis test was used for statistical analysis. Results: EndoRez showed significantly lower push-out bond strength than the others (p < 0.05). No significant difference was found amongst the groups in terms of percentage of sealer penetration. SmartSeal showed the least penetration than the others (p < 0.05). Conclusions: The bond strength and sealer penetration of resin-and glass ionomer-based sealers used with coated core was not superior to resin-based sealer used with conventional GP. Dentinal tubule penetration has limited effect on bond strength. The use of conventional GP with sealer seems to be sufficient in terms of push-out bond strength.