• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.9-15
• /
• 2001

Very low bit rate video coding uses the inter-picture video coding method for high compression. The inter-picture video coding is coded based on the information of the previous frames so any packet loss can lead to reduce the image quality on the transmission. In this paper, we proposed the multi-stream generation method for inter-media synchronization of very low bit rate video based on TCP for reliable transmission. The proposed approach performs a reliable transmission via a TCP based protocol. This method incorporates multi-streams in order to enhance the robustness of delivery and can withstand against network jitter. Moreover, the client bandwidths are fully utilized in a highly efficient way.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1065-1076
• /
• 2015

Network densification is regarded as the dominant driver for wireless evolution into the era of 5G. However, in this context, interference-limited dense small cell deployments are facing technical challenges in mobility management. The recently announced results from an LTE field test conducted in a dense urban area show a handover failure (HOF) rate of over 21%. A major cause of HOFs is the transmission failure of handover command (HO CMD) messages. In this paper, we propose two enhancements to HO performance in LTE networks - radio link failure-proactive HO, which helps with the reliable transmission of HO CMD messages while the user equipment is under a poor radio link condition, and Early Handover Preparation with Ping-Pong Avoidance (EHOPPPA) HO, which assures reliable transmission of HO CMD under a good radio link condition. We analyze the HO performance of EHOPPPA HO theoretically, and perform simulations to compare the performance of the proposed schemes with that of standard LTE HO. We show that they can decrease the HOF rate to nearly zero through an analysis, and based on the simulation results, by over 70%, without increasing the ping-pong probability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1161-1174
• /
• 2021

UDP is an unreliable data transmission protocol, in contrast to TCP, which implements reliable data delivery based on flow control and retransmission methods. However, the TCP operation algorithm for guaranteeing reliability is inefficient in improving transmission performance, and above all, there is no need to transmit data using the TCP method for fields that do not require perfect integrity. In this paper, we intend to discuss ways to improve the stability while maintaining the existing performance of UDP. To this end, a program applied with packet buffering and relaying techniques was developed, and the performance and stability of the experiment were verified.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2041-2046
• /
• 2008

A frequency-dependent slow-wave factor (SWF) and equivalent circuit model of transmission line with defected ground structures (DGS) is described. Once S-parameters of a DGS transmission line are given, the conventional frequency -independent equivalent circuit elements are extracted using 3dB cutoff and resonant frequencies (Fc and Fo) as the first step. Using the initial equivalent elements and simple transmission line theories, a frequency-dependent equivalent transmission line model is established through an analytical method, and finally the frequency dependent SWF is calculated. The proposed equivalent circuit model and SWF are frequency-dependent and more reliable because even small insertion loss within available passband is considered, while they have been independent of frequency.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1053-1057
• /
• 1987

In this paper, we have studied a communication protocol which may provide Audio/Video data transmission in real time. Auido/Video data have its own characteristics. A new transport protocol with realtime constraint has been designed and implemented which performs dynamic error control and flow control depending on the characteristics of transmitted Audio/Video data. Since the receiving data can be predicted from the previously received data using the prediction function in Auido/Video data transmission, these functions are introduced in our transport protocol that may possibly improve the speed of data transmission and give a real time response. We have tested our transport protocol and measured the performance by the simulation. We assume that our transport protocol would be used in LAN environment. Our prime purpose is to provide a reliable and real time Auido/Video data transmission service.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.387-389
• /
• 2001

The railway signaling systems are computerized vital equipments for safety guarantee of train running. And also it is important to prepare the reliable communication link between signalling equipments. In this paper the review of network technology for railway signalling is presented and reliable network technology for network is represented. And also the direction for our further study on these is discussed.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.314-323
• /
• 2002

The routing protocols designed for wired networks can hardly be used for mobile ad-hoc networks due to limited bandwidth of wireless transmission and unpredictable topological change. Recently, several routing protocols for mobile ad-hoc networks have been Proposed. However, when theme protocols are applied to support real time services like multimedia transmission, they still have problems in ad-hoc networks, where the topology changes drastically. In this paper, we propose a new route selection algorithm which selects the most reliable route that is impervious to route failures by topological changes by mobile hoots. For reliable route selection, the concept of virtual zone (stable zone and caution zone) is proposed. The zone is located in a mobile node'transmission range and determined by mobile node's mobility information received by Global Positioning System (GPS). The proposed algorithm is applied to the route discovery procedure of the existing on-demand routing protocol, AODV, and evaluated by simulation in various traffic conditions and mobility patterns.

• Journal of the Korea Society for Simulation
• /
• v.16 no.3
• /
• pp.49-56
• /
• 2007

There are many application areas of wireless sensor networks, such as combat field surveillance, terrorist tracking and highway traffic monitoring. These applications collect sensed data from sensor nodes to monitor events in the territory of interest. One of the important issues in these applications is the existence of the radio-jamming zone between source nodes and the base station. Depending on the routing protocol the transmission of the sensed data may not be delivered to the base station. To solve this problem we propose a genetic algorithm based routing method for reliable transmission while considering the balanced energy depletion of the sensor nodes. The genetic algorithm finds an efficient routing path by considering the radio-jamming zone, energy consumption needed fur data transmission and average remaining energy level. The fitness function employed in genetic algorithm is implemented by applying the fuzzy logic. In simulation, our proposed method is compared with LEACH and Hierarchical PEGASIS. The simulation results show that the proposed method is efficient in both the energy consumption and success ratio of delivery.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.11
• /
• pp.42-48
• /
• 2020

The agricultural tractor is a multi-purpose vehicle, which is frequently used in the agricultural field. It must be highly reliable in terms of human safety. Design and analysis of agricultural tractors must be performed using actual agricultural workload to maintain high reliability. Additionally, the frequency with which various components and systems are used must also be taken into consideration. In this study, a tractor is built to measure its workload in the actual field. Further, the measured load was analyzed for various farming tasks. The range of ratios of consumed power to engine power was measured to be 42.6%-87.2%, 75.1%-97%, 26.5%-59.2% for a plow, rotary, and harvest tasks, respectively. The results were fed into a transmission simulation model to analyze the strength and life of the transmission components. We conclude that a more reliable product can be constructed by incorporating the transmission analyses using the actual load.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.916-919
• /
• 2003

Reliable multicast data transmission in a 1:N environment needs more sophisticated error control mechanism than that of in 1:1 environment due to ACK implosion and duplicated retransmission. Although there have been many related research on error control in reliable multicast, real implemented protocols are rare. As one of the reliable multicast transport protocols, ECTP is selected as an international standard reliable multicast protocol by ITU-T and ISO and implemented on RedHat 7.2 machine by us. In this paper, we evaluate the performance of the error control mechanism in the respect of throughput and generated control packet numbers with a real implementation code. From the results, it is concluded that the suitable values of error control parameters can be obtained from the local group size and network environments.