• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.116-123
• /
• 2013

In mobile healthcare applications, the reliable transmission of the bio-data is very important. In this article, we present a reliable bio-data transmission technique for mobile healthcare monitoring service at 6LoWPAN multi-hop wireless networks. In particular, we expand IEEE 11073-20601 protocol, and propose the reliable path construction for 6LoWPAN aimed to reliably provide mobile healthcare service over wireless sensor network, using IPv6 network. 6LoWPAN is recognized possibility because it is agree with sensor network by raising Adaptation layer on the MAC layer to transmit IPv6 packets. In this article proposed minimize the algorithm complexity and reliability routing protocol because the 6LoWPAN devices are suitable for low cost, small size and battery that can be used to health care system environment. And detailed procedures and algorithms are presented. We the proposed method to prove the superiority of using NS-3 for compareing with AODV protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1208-1218
• /
• 2012

Disseminating broadcast information stably and reliably in IEEE 802.11-like CSMA wireless networks requires that a source should seek collision-free transmission to multiple receivers and keep track of the reception state of the multiple receivers. We propose a simple yet efficient feedback scheme for stable reliable broadcast in wireless networks, called 2-polling feedback, where the state of two receivers are checked by a source before its broadcast transmission attempt We present a performance analysis of the class of reliable broadcast feedback schemes in terms of two performance metrics (packet transmission delay and packet stable time). The analysis results show that the proposed 2-polling feedback scheme outperforms the current existing classes of feedback schemes in the literature, i.e., all-polling feedback and 1-polling feedback. The 2-polling feedback scheme has lower asymptotic complexity than the all-polling feedback, and has the same asymptotic complexity as the 1-polling feedback but exhibits almost 50 % reduction in packet stable time.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.3
• /
• pp.37-45
• /
• 2004

In this paper we propose Clustered Group Multicast by Clustering Algorithm in Wireless Mobile Ad-hoc Network. The proposed scheme applies to Weighted Cluster Algorithm Ad-hoc network is a collection of wireless mobile hosts forming a temporary network without the aid of any centralized administration or reliable support services such as wired network and base station. In ad hoc network muting protocol because of limited bandwidth and high mobility robust, simple and energy consume minimal. WCGM method uses a base structure founded on combination weighted value and applies combination weight value to cluster header keeping data transmission by seeped flooding, which is the advantage of the exiting FGMP method. Because this method has safe and reliable data transmission, it shows the effect to decrease both overhead to preserve transmission structure and overhead for data transmission.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.40-45
• /
• 2007

In this paper, aim to suggest the medical information wireless transmission system to provide the mobility of medical service by means of wireless area network which makes it possible, home or at a long range, to check and oversee the state of patients, and to can out a simulation. The proposed method converts medical information to digital data in an emergency and sends them to mobile terminals such as PDAs to make possible swift first aid. The simulation took advantage of the OFDM transmission method based on IEEE 802.1la in order to send reliable medical information in mobile wireless channel environment, and analyzed the system performance by applying convolution encoding to transmit reliable information in AWGN and 3-ray mobile multipath fading channel environment.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.188-198
• /
• 2002

In this paper, we propose an active network to support reliable data transmission in the mobile ad-hoc network. The active network uses DSR(Dynamic Source Routing) protocol as its basic routing protocol, and uses source and destination nodes as key active nodes. For reliable improvement the source node is changed to source active node to add function that its buffer to store the last data with the flow control for data transmission per destination node. The destination node is changed to destination active node to add function that it requests the re-transmission for data that was not previously received by the destination active node with the flow control for data reception per source active node As the result of evaluation. we found the proposed active network guaranteed reliable data transmission with almost 100% data reception rate for slowly moving mobile ad-hoc network and with more 95% data reception rate, which is improvement of 3.5737% reception rate compared with none active network, for continuously fast moving mobile ad-hoc network.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.875-882
• /
• 2002

The active packets unlike traditional IP packets should be executed at each active node along their path. To execute the active program at each active node, the active packets for an active program should go through the same active nodes and all packets are delivered without any loss. This paper presents the new active engine for every active packet which execute an active program to be routed through the same intermediate active nodes and to be delivered reliably. Proposed active engine requires fewer changes to existing IP protocols and guarantees the reliable delivery of the active packets. Moreover, even if the sender does not have any information about the intermediate nodes every active packet is routed through the same intermediate active nodes. The simulation results show that proposed active engine achieves an efficient transmission with high data delivery and low communication overhead compared with the other existing transmission protocols.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.442-445
• /
• 2006

In Wireless Sensor Networks(WSNs), a sensor node broadcasts an acquisited data to neighboring other nodes and it makes serious data duplication problem that increases network traffic loads and data loss. This problem is concerned with the conflict condition for supporting both the reliability of data transfer and avoidance of network congestion. To solve the problem, a reliable congestion control protocol is necessary that considers critical factors affecting on data transfer reliability such as reliable data transmission, wireless loss, and congestion loss for supporting effective congestion control in WSNs. In this paper, we proposes a reliable congestion protocol, ratted HRCCP, based on hop-hop sequence number, and DSbACK by minimizing useless data transfers as an energy-saved congestion control method.

• The Journal of the Acoustical Society of Korea
• /
• v.4 no.2
• /
• pp.3-12
• /
• 1985

The surface intensity method is a relatively new tool which can identify the noise source or path and measure the radiation power. One microphone and one accelerometer are used in this new technique. In this study, this new technique has been used to measure the field transmission loss trough doors. The results of the experiment indicate that the surface intensity method produces reliable data and can be applied to the transmission loss measurement.

• The Journal of the Acoustical Society of Korea
• /
• v.4 no.2
• /
• pp.3.1-3.1
• /
• 1985

The surface intensity method is a relatively new tool which can identify the noise source or path and measure the radiation power. One microphone and one accelerometer are used in this new technique. In this study, this new technique has been used to measure the field transmission loss trough doors. The results of the experiment indicate that the surface intensity method produces reliable data and can be applied to the transmission loss measurement.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.4
• /
• pp.206-213
• /
• 2011

Line sleeves, which used to connect ACSR cables when transmission lines were constructing, sometimes cause power transmission failure due to deterioration and corrosion. Therefore, power transmission line should be inspected regularly to prevent national disaster. Current inspection tool detects insertion length of transmission line on line sleeves, the inspection tool includes enormous error by operator. Moreover, the system is not controlled remotely, negligent accident would be caused while inspecting. To deal with those problems, KEPCO reviewed several ways to inspect line sleeves and proposes new method to inspect line sleeve by measuring magnetic flex which penetrate junction of steel and aluminum sleeve. The developed inspection tool is reliable enough to detect eccentric sleeves. Also, the developed inspection device was applied on actual transmission line and verified its effectiveness.