• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.1014-1024
• /
• 2010

Pepper ($Capsicum$ spp.) anthracnose caused by $Colletotrichum$ $acutatum$ is a destructive disease susceptible to areas where chili peppers are grown. $Capsicum$ $baccatum$ var. $pendulum$ (Cbp) is resistant to anthracnose and has actively been used for interspecific hybridization for the introgression of resistance gene(s) into cultivated chili peppers. The goals of this study were to determine the inheritance of resistance to anthracnose within $Capsicum$ $baccatum$ and to map quantitative trait loci (QTLs) for the anthracnose resistance. A genetic mapping population consisting of 126 $F_2$ plants derived from a cross between $Capsicum$ $baccatum$ var. $pendulum$ (resistant) and $Capsicum$ $baccatum$ 'Golden-aji' (susceptible) was used for linkage mapping. The linkage map was constructed with 52 SSRs, 175 AFLPs, and 100 SRAPs covering 1,896cM, with an average interval marker distance of 4.0cM. Based on this map, the number, location, and effect of QTLs for anthracnose resistance were studied using plants inoculated in the laboratory and field. A total of 19 quantitative trait loci (2 major QTLs and 16 minor QTLs) were detected. Two QTLs ($An8.1$, $An9.1$) showed 16.4% phenotypic variations for anthracnose resistance after wounding inoculation. In addition, five minor QTL loci ($An7.3$, $An7.4$, $An4.1$, $An3.1$, $An3.2$) showed a total of 60.73% phenotypic variations of anthracnose resistance in the field test. Several significant QTLs were also detected and their reproducibility was confirmed under different inoculation conditions. These QTLs are now being confirmed with different breeding populations. Markers tightly linked to the QTLs that are reliable under different environmental conditions will help to determine the success of marker-assisted selection for anthracnose -resistant breeding programs in chili pepper.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.207-216
• /
• 2006

Vaginal cytology was examined in 12 Shih-tzu bitches to establish the accurate basic data for estimate to the optimal mating time and ovulation time. The mean duration of proestrus and estrus were $9.09{\pm}0.83\;(mean{\pm}SD)$ days and $7.36{\pm}0.47$ days in pregnant bitches. The gestational length in the 12 pregnant bitches was $65.2{\pm}0.5$ days in pregnant bitches when Day 0 was timed from the first day of male acceptance. Characteristic features of vaginal cytology during the estrous cycle were the high proportion of large intermediate cell, superficial cell, anuclear cell and erythrocyte in proestrus, superficial cell, anuclear cell and erythrocyte in estrus, and parabasal cell, small and large intermediate cell and leukocyte in diestrus, respectively. Cornification index (CI) was the high proportion in proestrus and estrus, then it decreased in diestrus and anestrus. When Day 0 was timed from the day of the first male acceptance, the CI peak was Day 2 and maintained above 80% between Day -4 and Day 6 during 11 days, and above 90% between Day -1 and Day 5 during 7 days. In relationship between CI and reproductive hormones, CI showed peak at the first day after plasma estradiol-$17{\beta}$ concentration peak and plasma progesterone concentration was first increased above 4.0 ng/ml at Day 0 which was the first day after CI peak. In conclusion, ovulation in Shih-tzu bitches occurred at the first day after CI peak. Vaginal cytology is the simple and reliable method for estimating estrous cycle, optimal breeding time and ovulation time in Shih-tzu bitches.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_2
• /
• pp.1565-1576
• /
• 2023

An atmospheric correction algorithm based on the radiative transfer model is required to obtain remote-sensing reflectance (R_rs) from the Geostationary Ocean Color Imager-II (GOCI-II) observed at the top-of-atmosphere. This R_rs derived from the atmospheric correction is utilized to estimate various marine environmental parameters such as chlorophyll-a concentration, total suspended materials concentration, and absorption of dissolved organic matter. Therefore, an atmospheric correction is a fundamental algorithm as it significantly impacts the reliability of all other color products. However, in clear waters, for example, atmospheric path radiance exceeds more than ten times higher than the water-leaving radiance in the blue wavelengths. This implies atmospheric correction is a highly error-sensitive process with a 1% error in estimating atmospheric radiance in the atmospheric correction process can cause more than 10% errors. Therefore, the quality assessment of R_rs after the atmospheric correction is essential for ensuring reliable ocean environment analysis using ocean color satellite data. In this study, a Quality Assurance (QA) algorithm based on in-situ R_rs data, which has been archived into a database using Sea-viewing Wide Field-of-view Sensor (SeaWiFS) Bio-optical Archive and Storage System (SeaBASS), was applied and modified to consider the different spectral characteristics of GOCI-II. This method is officially employed in the National Oceanic and Atmospheric Administration (NOAA)'s ocean color satellite data processing system. It provides quality analysis scores for R_rs ranging from 0 to 1 and classifies the water types into 23 categories. When the QA algorithm is applied to the initial phase of GOCI-II data with less calibration, it shows the highest frequency at a relatively low score of 0.625. However, when the algorithm is applied to the improved GOCI-II atmospheric correction results with updated calibrations, it shows the highest frequency at a higher score of 0.875 compared to the previous results. The water types analysis using the QA algorithm indicated that parts of the East Sea, South Sea, and the Northwest Pacific Ocean are primarily characterized as relatively clear case-I waters, while the coastal areas of the Yellow Sea and the East China Sea are mainly classified as highly turbid case-II waters. We expect that the QA algorithm will support GOCI-II users in terms of not only statistically identifying R_rs resulted with significant errors but also more reliable calibration with quality assured data. The algorithm will be included in the level-2 flag data provided with GOCI-II atmospheric correction.

• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.625-634
• /
• 2003

More than a decade after its initial proposal, deployment of IP Multicast has been limited due to the problem of traffic control in multicast routing, multicast address allocation in global internet, reliable multicast transport techniques etc. Lately, according to increase of multicast application service such as internet broadcast, real time security information service etc., overlay multicast is developed as a new internet multicast technology. In this paper, we describe an overlay multicast protocol and propose fast join mechanism that considers switching of the tree. To find a potential parent, an existing search algorithm descends the tree from the root by one level at a time, and it causes long joining latency. Also, it is try to select the nearest node as a potential parent. However, it can't select the nearest node by the degree limit of the node. As a result, the generated tree has low efficiency. To reduce long joining latency and improve the efficiency of the tree, we propose searching two levels of the tree at a time. This method forwards joining request message to own children node. So, at ordinary times, there is no overhead to keep the tree. But the joining request came, the increasing number of searching messages will reduce a long joining latency. Also searching more nodes will be helpful to construct more efficient trees. In order to evaluate the performance of our fast join mechanism, we measure the metrics such as the search latency and the number of searched node and the number of switching by the number of members and degree limit. The simulation results show that the performance of our mechanism is superior to that of the existing mechanism.

• Journal of Plant Biotechnology
• /
• v.45 no.2
• /
• pp.110-116
• /
• 2018

This study was conducted to develop a simple, rapid, and reliable method for in vitro propagation of disease-free and true-to-type clones from sucker explants of thornless blackberry (Rubus fruticosus L. ${\times}$ R. parvifolius L.). To induce multiple shoots, the sucker explants were sterilized in 1% NaOCl solution, and then were aseptically cultured on the full and 1/2 MS solid medium supplemented with BAP (0.1, 0.5, 1.0, 2.0 mg/L). After six weeks of culture, the highest frequency (85.4%) of shoot formation from sucker explants was obtained on the full-strength MS medium with 1.0 mg/L BAP. Node explants obtained from multiple shoots were cultured on the various media of full- or half-strength of AD, B5, MS, SH, QL, WPM media, respectively. After 30 days of culture, plant growth was good on the half-AD, half-QL medium. After 90 days of culture, plant growth was good on the full MS and full SH medium. The survival rate of the plantlets after transfer to plastic pots containing soil mixture (sand: soil: vermiculite was 1:1:1, vol.) in the greenhouse was 98%. The results indicate that a multiple-shoot procedure can be applied for an efficient mass propagation of Rubus fruticosus L. ${\times}$ R. parvifolius L.

• Journal of Arbitration Studies
• /
• v.17 no.2
• /
• pp.167-187
• /
• 2007

As Korea has reached a free trade agreement with the United States of America, it is required to provide an appropriate procedure to ".kr" domain name disputes based on the principles established in the Uniform Domain Name Dispute Resolution Policy(UDRP). Currently, Internet address Dispute Resolution Committee(IDRC) established under Article 16 of the Act on Internet Address Resources provides the dispute resolution proceedings to resolve ".kr" domain name disputes. While the IDRC's proceeding is similar to the UDRP administrative proceeding in procedural aspects, the Domain Name Dispute Mediation Policy that is established by the IDRC and that applies to disputes involving ".kr" domain names is very different from the UDRP for generic Top Level Domain (gTLD) in substantial aspects. Under the Korea-U.S. Free Trade Agreement(KORUS FTA), it is expected that either the Domain Name Dispute Mediation Policy to be amended to adopt the UDRP or the IDRC to examine the Domain Name Dispute Mediation Policy in order to harmonize it with the principles established in the UDRP. It is a common practice of cybersquatters to warehouse a number of domain names without any active use of these domain names after their registration. The Domain Name Dispute Mediation Policy provides that the complainant may request to transfer or delete the registration of the disputed domain name if the registrant registered, holds or uses the disputed domain name in bad faith. This provision lifts the complainant's burden of proof to show the respondent's bad faith because the complainant is only required to prove one of the three bad faiths which are registration in bad faith, holding in bad faith, or use in bad faith. The aforementioned resolution procedure is different from the UDRP regime which requires the complainant, in compliance with paragraph 4(b) of the UDRP, to prove that the disputed domain name has been registered in bad faith and is being used in bad faith. Therefore, the complainant carries heavy burden of proof under the UDRP. The IDRC should deny the complaint if the respondent has legitimate rights or interests in the domain names. Under the UDRP, the complainant must show that the respondent has no rights or legitimate interests in the disputed domain name. The UDRP sets out three illustrative circumstances, any one of which if proved by the respondent, shall be evidence of the respondent's rights to or legitimate interests in the domain name. As the Domain Name Dispute Mediation Policy provides only a general provision regarding the respondent's legitimate rights or interests, the respondent can be placed in a very week foundation to be protected under the Policy. It is therefore recommended for the IDRC to adopt the three UDRP circumstances to guide how the respondent can demonstrate his/her legitimate rights or interests in the disputed domain name. In accordance with the KORUS FTA, the Korean Government is required to provide online publication to a reliable and accurate database of contact information concerning domain name registrants. Cybersquatters often provide inaccurate contact information or willfully conceal their identity to avoid objection by trademark owners. It may cause unnecessary and unwarranted delay of the administrative proceedings. The respondent may loss the opportunity to assert his/her rights or legitimate interests in the domain name due to inability to submit the response effectively and timely. The respondent could breach a registration agreement with a registrar which requires the registrant to submit and update accurate contact information. The respondent who is reluctant to disclose his/her contact information on the Internet citing for privacy rights and protection. This is however debatable as the respondent may use the proxy registration service provided by the registrar to protect the respondent's privacy.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.1
• /
• pp.72-83
• /
• 2003

Korea has its long history and tradition of eating dogmeat as food, but dogmeat was excluded from the animal procession law because of the criticism from foreigners, so it is being distributed without inspection of government. Government rejects people's demand for the legalization of edibility of dogmeat due to the protest from a few animal right activist groups, but 80% of nationals favor edibility of dogmeat, and urge the legalization of dogmeat, while 20 lawmakers in legislature submitted the bill to legalize the edibility of dogmeat, and judicature ruled dogmeat is edible meat. Westerners' criticism on dogmeat is, in part, from real protection of animal, but rather their intention seems to be from the racism of colors, the purpose to increase the export amount of beef, to divert the attention of utilizing the abandoned pet dog as animal feed, and to raise a fund for the animal right activist groups. Government distorts the public opinion of edibility of dogmeat, making use of the related animal protection group, and the ministry of Agriculture and Forestry controlling over the animal protection law sides for the concerned groups opposing to the edibility of dogmeat, not for farmers. Furthermore, government has no intention of solving the problem of edibility of dogmeat and can't even propose the solution without presenting any adequate measure, worsening the situation. As a result, the issue of edibility of dogmeat is on the dead angle of sanitation, and wastes of dog slaughtering are polluting the environment. To solve this problem, it is necessary to legalize the edibility of dogmeat in order to distribute it sanitarily, to protect the environment, to increase tax revenues, and to secure the national pride. In addition, the Ministry of Agriculture and Forestry should transfer the jurisdiction over the animal protection law to the Ministry of Environment, and government should execute a reliable policy on the bases of objective and accurate investigation and statistics. Also, it is needed not only to set up the exclusive public bureau to make the edibility of dogmeat known worldwide and research institute, but also to launch the non government organization under the auspices of government. Then dogmeat can become the world renowned food as that of representing Korea.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.