• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.6079-6097
• /
• 2018

Safety-related systems (SRSs) has widely used in shipbuilding and power generation to prevent fatal accidents and to protect life and property. Thus, SRS performance is a high priority. The safety integrity level (SIL) is the relative performance level of an SRS with regard to its ability to operate reliably in a safe manner. In this article, we proposed an optimal design procedure to achieve the targeted SIL of SRSs. In addition, a more efficient failure mode and effects diagnostic analysis (FMEDA) process and optimization model were developed to improve cost efficiency. Based on previous IEC 61508 diagnostic analyses that revealed unnecessary costs associated with excessive reliability, the new approach consists of two phases: (i) SIL evaluation by FMEDA, and (ii) solution optimization for achieving the target SIL with minimal cost using integer-programming models. The proposed procedure meets the required safety level and minimizes system costs. A case study involving a gas-detection SRS was conducted to demonstrate the effectiveness of the new procedure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1016-1021
• /
• 2008

In this study, effective methods for reliability estimation and reliability-based design optimization(RBDO) are proposed using kriging metamodel and genetic algorithm. In our previous study, we proposed the accurate method for reliability estimation using two-staged kriging metamodel and genetic algorithm. In this study, the possibility of applying the previously proposed method to RBDO is examined. The accuracy of that method is much improved than the first order reliability method with similar efficiency. Finally, the effective method for RBDO is proposed and applied to numerical examples. The results are compared to the existing RBDO methods and shown to be very effective and accurate.

• Geomechanics and Engineering
• /
• 제2권1호
• /
• pp.57-69
• /
• 2010

A major consideration in the design of tunnels in urban areas is the prediction of the ground movements and surface settlements associated with the tunneling operations. Excessive ground movements can damage adjacent building and utilities. In this paper, a neural network model is used to predict the maximum surface settlement, based on instrumented results from three separate EPB tunneling projects in Singapore. This paper demonstrates that by coupling the trained neural network model to a spreadsheet optimization technique, the reliability assessment of the settlement serviceability limit state can be carried out using the first-order reliability method. With this method, it is possible to carry out sensitivity studies to examine the effect of the level of uncertainty of each parameter uncertainty on the probability that the serviceability limit state has been exceeded.

• Advances in Computational Design
• /
• 제8권2호
• /
• pp.179-190
• /
• 2023

In this paper, building information modelling (BIM) associated to the principle of significant items emerged at quantities and costs in the optimization of productivity related to the rehabilitation of the building where proposed and discussed. A quantitative and qualitative study related to the field of application based on some parameters such as pathology diagnosis, projects documents and bills of quantities were used for model development at the preliminary stage of this work. The study identified 14 quantities significant items specified to cost value based on the use of the 80/20 Pareto rule, through the integration of building information modelling (BIM) in the optimisation of labour productivity for rehabilitation of buildings. The results of this study reveal the reliability and the improvement of labour productivity using building information modelling process integrating quantities and cost significant items.

• Structural Engineering and Mechanics
• /
• 제81권4호
• /
• pp.429-441
• /
• 2022

A probabilistic assessment of the seismic-excited buildings with a multiple-tuned-mass-damper (MTMD) system is carried out in the presence of uncertainties of the structural model, MTMD system, and the stochastic model of the seismic excitations. A free search optimization procedure of the individual mass, stiffness and, damping parameters of the MTMD system based on the snap-drift cuckoo search (SDCS) optimization algorithm is proposed for the optimal design of the MTMD system. Considering a 10-story structure in three cases equipped with single tuned mass damper (STMS), 5-TMD and 10-TMD, sensitivity analyses are carried out using Sobol' indices based on the Monte Carlo simulation (MCS) method. Considering different seismic performance levels, the reliability analyses are done using MCS and kriging-based MCS methods. The results show the maximum structural responses are more affected by changes in the PGA and the stiffness coefficients of the structural floors and TMDs. The results indicate the kriging-based MCS method can estimate the accurate amount of failure probability by spending less time than the MCS. The results also show the MTMD gives a significant reduction in the structural failure probability. The effect of the MTMD on the reduction of the failure probability is remarkable in the performance levels of life safety and collapse prevention. The maximum drift of floors may be reduced for the nominal structural system by increasing the TMDs, however, the complexity of the MTMD model and increasing its corresponding uncertainty sources can be caused a slight increase in the failure probability of the structure.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.120-121
• /
• 2013

최근, 우리나라는 소득수준 향상, 교통여건 개선 등으로 여가활동 및 관광형태가 다양화되면서 육지 레저에서 해양 레저 활동이 증가하고 있다. 하지만 이런 여가활동을 수용할 수 있는 기반시설을 구축하고 있지만, 아직도 부족한 실정이다. 또한, 시설 구축 시 도입되는 기자재는 거의 전량을 수입하고 있으며 특히 마리나 구축 시 사용되는 긴장계류장치도 비슷한 상황이다. 따라서 이 논문에서는 에틸렌 프로필렌 고무와 아라미드섬유 등 재료를 이용하여 긴장계류장치를 구성하고 신뢰성 기반 강건 설계를 통해 국내 해양환경에 적합한 제품을 개발하여 해양레저문화 활성화와 산업발전에 이바지할 수 있을 거라고 생각한다.

• International Journal of Reliability and Applications
• /
• 제2권3호
• /
• pp.209-240
• /
• 2001

Computer-based simulation and analysis is used extensively in engineering for a variety of tasks. Despite the steady and continuing growth of computing power and speed, the computational cost of complex high-fidelity engineering analyses and simulations limit their use in important areas like design optimization and reliability analysis. Statistical approximation techniques such as design of experiments and response surface methodology are becoming widely used in engineering to minimize the computational expense of running such computer analyses and circumvent many of these limitations. In this paper, we compare and contrast five experimental design types and four approximation model types in terms of their capability to generate accurate approximations for two engineering applications with typical engineering behaviors and a wide range of nonlinearity. The first example involves the analysis of a two-member frame that has three input variables and three responses of interest. The second example simulates the roll-over potential of a semi-tractor-trailer for different combinations of input variables and braking and steering levels. Detailed error analysis reveals that uniform designs provide good sampling for generating accurate approximations using different sample sizes while kriging models provide accurate approximations that are robust for use with a variety of experimental designs and sample sizes.

• 한국항공우주학회지
• /
• 제33권3호
• /
• pp.18-25
• /
• 2005

다분야 통합해석 시스템의 신뢰성 해석에 대한 기존의 연구들은 대부분 비선형 최적화 기법을 기반으로 하고 있다. 이들은 다분야 통합최적설계 프레임워크를 이용하여 신뢰성을 직접 해석하기 때문에 효율적인 AFORM기법을 적용하는 것이 불가능하다. 본 논문은 AFORM기법을 적용한 다분야 통합시스템의 순차적 신뢰성 해석기법(SARAM)을 제안한다. 이를 위해 신뢰성 해석과 다분야 통합시스템의 해석(MDA)을 분리하고, 순차적으로 배열하여, 되풀이구조를 가지는 해석구조를 구성하였다. 제안된 방법의 효율성은 계산량, 정확도, 그리고 동시 수행기능의 관점에서 평가하였다. 3개의 다분야 통합시스템 예제를 계산한 결과, 제안된 기법은 정확도를 보장하면서 기존의 방법에 비해 우수한 계산효율을 보였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.439-449
• /
• 2002

This paper reviews our recent research works on the interconnection technologies in electronic packaging and assembly. At the aspect of advanced joining methods, laser-ultrasonic fluxless soldering technology was proposed. The characteristic of this technology is that the oxide film was removed through the vibration excitated by high frequency laser change in the molten solder droplet. Application researches of laser soldering technology on solder bumping of BGA packages were carried out. Furthermore, interfacial reaction between SnPb eutectic solder and Au/Ni/Cu pad during laser reflow was analyzed. At the aspect of soldered joints' reliability, the system for predicting and analyzing SMT solder joint shape and reliability(PSAR) has been designed. Optimization design method of soldered joints' structure was brought forward after the investigation of fatigue failure of RC chip devices and BGA packages under temperature cyclic conditions with FEM analysis and experimental study. At the aspect of solder alloy design, alloy design method based on quantum was proposed. The macroproperties such as melting point, wettability and strength were described by the electron parameters. In this way, a great deal of the experimental investigations was replaced, so as to realize the design and research of any kinds of solder alloys with low cost and high efficiency.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.27-37
• /
• 1993

응력 및 변위제약 하에 뼈대구조물의 초소중량설계를 얻기 위한 효율적인 방법을 제안한다. 주문제작이 빈번히 이루어지는 공학설계의 응용을 위해 다음의 5가지 단면형상을 고려하였다.(rectangular형, frame형, tube형, channel형 그리고 I형). 최적화 과정의 효율성을 증진시키기 위해 구조응답량(절점력, 변위)을 단면성질에 대해 1차 Taylor급수 전개했고 반면에 단면치수를 설계변수로 고려하였다. 제안된 방법의 효율성과 신뢰성을 보이기 위해 수치예를 통해 다른 방법에 의한 결과와 비교하였다. 그 결과 구조해석의 수를 크게 감소시킬 수 있었으며 뼈대구조물의 최적화에 매우 효율적으로 적용될 수 있음을 알게 되었다.