• Journal of the Korean Geotechnical Society
• /
• v.27 no.1
• /
• pp.77-86
• /
• 2011

The advanced geotechnical information has been required to determine the accurate design parameters for complex construction. However, the Standard Penetration Test (SPT), which has low reliability, has been used to estimate the subsurface condition in the field. The objective of this paper is development and application of the Static-Dynamic penetrometer, which detects the resistances in soft clay, sand and rock. The energy losses according to the rod connection methods (perfect or non-perfect connection, and number rods) are experimentally evaluated. The reflection and transmission ratios are used to investigate the energy loss by a simulation. The static-dynamic cone penetrometer, in which the accelerometers and strain gauges are installed on the cone tip and the rod head, is used to estimate the energy loss during penetration by impacts. The experimental and simulation studies show that the transferred energy through rods with non-perfect connection dramatically decreases. Furthermore, the transferred energy on the rod head is not the same as that on the cone tip. This study demonstrates that the energy loss should be evaluated on the cone tip.

• Journal of Korean Home Economics Education Association
• /
• v.25 no.2
• /
• pp.49-63
• /
• 2013

This study is conducted to activate the education of leisure activity for the old age so as to improve the qualities of the lives in the prolonged elderly lives. The method is examined to see how the level and types of leisure activities and life satisfaction for elderly. The target of the survey for this study was the 280 male and female elderly living in S city and C city. the statistics used for data analysis were reliability, frequency, percentage, mean standard deviation, t-test, one way ANOVA and correlation. The results of study were as follow; First, the result investigating the degrees of old people's participation in the pattern of leisure activities and life satisfaction showed pastime activities and family centered activities as the most participating leisure activity pattern, self developing activities and religious social service activities as the least participating one. Second, in comprehensive social demographic characteristic of the elderly participating in the leisure activities pattern, it was shown that the higher their level of lives was, the better their family atmosphere was, the healthier they were, they participated more in their leisure activities. Third, when the life satisfaction were reviewed to find what relation there were according to the pattern of leisure activities, it was shown that the more they participated in recreation and social activities, the more they participated in self developing activities, the more they participated in family centered activities, their life satisfaction was higher. and the old people who did the pastime activities showed high life satisfaction too. Considering this result, we need to develop systematic programs suited to our culture. In addition, Home Economics Education has to support the ideas and leisure experts have to be cultivated.

• Research in Community and Public Health Nursing
• /
• v.12 no.1
• /
• pp.278-287
• /
• 2001

The purpose of this study is to provide with basic information on application of hand acupuncture as a complementary and alternative therapy by giving some recognition of efficiency and effectiveness of hand acupuncture. And so, answers for questionnaires of 290 respondents were used for this research and collected from June 5 through 13, 1999 from adults twenty and over who were participating in the hand acupuncture training program in Seoul and had some direct experiences with hand acupuncture therapy, whatever they had been treated and/or had treated. To secure reliability of measurement tool. Cronbach'a has been calculated and Factor Analysis was done as Validity Analysis of question classification. Demograprucal characteristics of hand acupuncture experienced people and factors related to hand acupuncture experiences are calculated based on the real number and percentage. The degree of recognition of efficiency and effectiveness of hand acupuncture is made as average and standard deviation, while the degree of recognition of efficiency and effectiveness based on general characteristics come from one-way ANOVA. 1. According to socio-demographical analysis. the questioned could be classified firstly as age (40-49 : 32.5%. 30-39 : 24.9%. 50-59 : 21.9%. 60-69 : 14.7%. 20-29 : 6.0%). secondly gender (male 36.6%. female 63.4%). thirdly occupation (housewife: 43.8%. self-employed: 15.5%. company-employee: 14.8%). fourthly education (high school graduate: 41.9%, college graduate: 37.9%), and lastly monthly-income (1 to 2 million: 51.4%. 2 to 3 million: 20,3%) 2, As for the general aspects related to hand acupuncture. 80,0% of the respondents answered almost zero for the monthly average number of visit to hospital and 15.5% responded 1 to 2 visits, 6,2% of the respondents is complaining of a disorder of digestive system. 19,0% circulatory disease, 10.7% bad nervous system. By utilizing hand acupuncture, 84% of the questioned have following experiences in curing diseases: digestive system 47.3%, circulatory system 9.3%, nervous system 8.3%, 54,1% are curing 1 to 2 and 10.3% 3 to 4 patients on a daily basis with hand acupuncture. Research on the demerits of giving medical treatment with hand acupuncture shows 23,8% are feeling economic burden. 16.6% difficulty of learning and 16.2% weak theoretical backgrounds. 3. Among the efficiency recognition, possibility of general application is average 4,29 and simple treatment is 4,19. economic merits 4.36. possibility of establishment with supplementary and alternative medicine 4.17, medical effectiveness 4.09. 4, As a result of demographical analysis on the efficiency and effectiveness of hand acupuncture therapy, it appears that the recognition of efficiency based on occupation and the recognition of effectiveness based on monthly income are most significant to be noticed. In an orderly fashion. government-employee, self-employed, company-employee. and then housewife have perceived hand acupuncture very efficiently, And those who recognize hand acupuncture to be most effective are people earn 1 million to 2 million won a month, 5. The efficiency(p = .003) and effectiveness (p= .049) of hand acupuncture therapy by number of visit to hospital were statiscally significant, and effectiveness of hand acupuncture therapy by disease exist was statiscally significant (p= .033).

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.17-24
• /
• 2018

The pullout test, a nondestructive testing(NDT), for pre-installed inserts is perhaps the most widely used technique to estimate the in-situ compressive strength of concrete. It measures the force needed to pullout a standardized metal insert embedded into concrete members. The pullout test was certified by the American Society for Testing and Materials(ASTM) and Canadian Standards Association(CSA) as a reliable method for determining the strength of concrete in concrete structures under construction. To easily estimate the strength of ultra-high-strength concrete, a simplified pullout tester, primarily composed of a standard 12mm bolt with a groove on the shaft as a break-off bolt, an insert nut, and a hydraulic oil pump without a load cell, was proposed. Four wall and two slab specimens were tested for two levels of concrete strength, 80MPa and 100MPa, using a simplified pullout tester with a load cell to verify the advantages of the pullout test and simplified pullout test. The compressive strength of concrete, pullout load, and the rupture of the break-off bolt were measured 11 times, day 1 to 7, 14, 21, 28, and 90. The correlation of the pullout load and the compressive strength of each specimen show a higher degree of reliability. Therefore, a simplified pullout test can be used to evaluate the in-place strength of ultra-high-strength concrete in structures. The prediction equation for the groove diameter of the break-off bolt(y) with the concrete strength(x) was proposed as y=0.0184x+5.4. The results described in this research confirm the simplified pullout's utility and potential for low cost, simplicity, and convenience.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.124-135
• /
• 2015

As many countries have been raising awareness of environmental issues, greater efforts for eco-friendly construction have been made in both governmental and private sectors. However, assessment circumstances for building energy performance and green building standard of legislation are still based on two dimension and handwork. This takes time, cost and labor, and makes assessment inaccurate and inefficient. Therefore, this study suggests methods to improve eco-friendly construction permission process and to automatize open BIM-based assessment of Energy Performance Index (EPI) among several eco-friendly construction certification standards. First, it analyzes the relations between assessment criteria and IFC data, and provides solutions to problems and limitations. Second, it applies the solutions to assessment program in order to automatize open BIM-based assessment for EPI. The eco-friendly construction permission process with these solutions applied will reduce time, cost, and labor by simplifying and automatizing the tasks. Also, the simplified process of design revision will improve not only productivity and efficiency but also accuracy and reliability.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.3
• /
• pp.148-157
• /
• 2004

A rapid analytical method was developed to determine multiple pesticide residues in apples and pears using gas-liquid chromatography (GLC). The samples were extracted with water-miscible solvents and purified by cleanup procedures serially comprising liquid-liquid partition and solid-phase extraction (SPE). Each analyte was separated and determined by a high-resolution GLC equipped with electron-capture detector (ECD) and nitrogen-phosphorous detector (NPD). A total of 196 pesticides, which were previously classified into 5 groups each for ECD and NPD based on their retention behaviors on the capillary column and responses to the detector, were subjected to the recovery experiment. In compliance with the analytical criteria, 70 to 120% of recovery and less than 20% relative standard deviation the proposed method could be successfully applied to analyze 136 and 133 pesticide residues in apples and pears, respectively, which enabled not only rapid screening but quantitation of the residues. Even though less reliability was resulted from unacceptable recovery range, rest of pesticides including 43 and 45 analyzes in apples and pears, could be also detected for their identity. The proposed method fliled to cover 17 and 18 pesticides for apples and pears, which mostly showed high polarity or heat-lability but could be suitable far fast surveilance or monitoring of fruit harvests.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.4
• /
• pp.419-436
• /
• 2006

PURPOSE: The purpose of this study was to explore dental hygiene treatment fear and anxiety in dental patients. METHODS: The sample consisted of 466 dental patients who had received the dental hygiene treatment at 8 Dental Hospitals and Clinics in Daegu city between March and August 2006 studied. Dental hygienists recruited a questionnaire, which includes generalized anxiety sub-scale(4 items), specific fear sub-scale(5 items), distrust sub-scale(5 items), and catastrophic anxiety sub-scale(4 items). Minimum score is 1, and maximum score is 5. The research was designed to be a cross-sectional measured study. SAS statistical software was used for the analysis. The characteristics of the study sample were described by mean and standard deviation(SD) for continuous variables and by frequency and percentage for categorical variables. The Student's t-test and analysis of variance(ANOVA) were used to compare fear and anxiety score in demographic variables. A Pearson's correlation analysis was conducted for relationship among values of fear and anxiety for dental hygiene. Multiple regression analysis was performed to determine the factors associated with fear and anxiety related with dental hygiene. RESULTS: A total of 466 dental patients were analyzed, their average age${\pm}$SD was $37.7{\pm}12.9$ years(range: 15-79 yr). The mean value for dental hygiene fear and anxiety was 2.70(generalized anxiety 2.65, specific fear 2.93, distrust anxiety 2.72, and catastrophic anxiety 2.42, respectively). There was a statistically significant difference in gender(p<0.05), 2.81 for women was higher than 2.55 for men(p=.0000). The older we are, the higher fear and anxiety for dental hygiene treatment were. that is, under age of 20 years 2.49, 20 years 2.59, 30 years 2.69, 40 years 2.77, 50 years 2.88, 60 years 2.69, and over age of 70 2.45, respectively(p=.0321). Factors related to dental hygiene treatment fear and anxiety by multiple regressions were gender(${\square}$=0.18, p=0.0001), age(${\square}$=.07, p=.0058), and the time when visits dentist recently(${\square}$=.07, p=.0058). CONCLUSIONS: In conclusion, gender, age and the time when visits dentist recently were significantly associated with dental hygiene treatment fear and anxiety. We recommend that further research should investigate a dental hygiene treatment fear and anxiety by using more follow-up study.

• Archives of design research
• /
• v.17 no.1
• /
• pp.163-178
• /
• 2004

In this study, in order to achieve the before-mentioned study purpose, the importance of developing the new product, the relationship with the design, and the design element for developing the new product were considered. In order to extract the importance of the design element which is applied to the development of the new product design, the research model about the induction of the priority was created, the evaluation items were instituted, and the demonstrative research approach was performed in order to recognize the relationship among those elements. Firstly, in the process of selecting the items for the application, 14 evaluation elements which were extracted through the advanced study data were grouped in 4 kinds of dimensions, and the properties which are related with the Digital TV product were composed up of 36 items. Through the factor analysis, by decreasing the detailed standard for the evaluation of 36 items, the parsimony was secured, and the characteristics which the various items contain induced into one factor. Secondly, the detailed factors which were united into one factor went under the paired comparison as one by one through AHP again, and then the importance degree was generated. First of all, as the first stage of AHP, the decision making factors which affect the whole achievement of purpose of the decision making were classified as in a hierarchical style. From these research results, it was known that the functional factor and esthetic factor in the process of designing the new product are the major affecting variables, and it was confirmed that in case of the Digital TV products group, the factors such as the high quality of picture, big screen, user interface, sound, product reliability, style, size, indoor reproduction, and guarantee are the main factors which influence the need of the consumers in purchasing products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.530-537
• /
• 2020

The purpose of this study was to determine the factors affecting the satisfaction with pre-service childcare, the work related stress, and the conflicts perceived by pre-service childcare teachers. The data was processed using the SPSS Statistical Package Program, and the frequencies, means, and standard deviations were calculated. Reliability analysis, correlation analysis, and multiple regression analysis were also conducted. The results showed that the class contents, the environment of childcare practice, and the conflicts with children were stressful and they negatively affected practice satisfaction. Second, there was statistically significant negative correlation between the pre-service teachers' childcare practice stress, conflict during the practice, and practice satisfaction. Third, the stress of preservice teachers' childcare practice and the conflict felt during the practice also affect the childcare practice satisfaction. Based on these findings, further study is needed for implementing effective measures in order to improve the practice satisfaction with exhaustive pre-practical education and the field job-oriented curriculum. These measures will enable students majoring in childcare to experience less stress and conflicts during their education.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3370-3377
• /
• 2015

FMECA(Failure Mode, Effects and Criticality Analysis) techniques to make quantitative evaluation of failure effects severity and criticality have been applied to systematic failure analysis for reliability improvement of train which should provide regular service and secure high level of safety as a mass transportation system. These FMECA techniques do not fully reflect the inherent train operation and maintenance circumstances because they are based on the FMECA standards devised for other industries such as automobile industry and FMECA standard dedicated to train industry has not been established yet. This paper analyzes FMECA standards for various industries, and suggests a FMECA technique dedicated to train industry which makes failure effect analysis and criticality analysis step by step and makes criticality analysis placing emphasis on the severity of the failure effect. The proposed technique is applied to FMECA of high-speed current breaker which is a core safety device of train using field failure data for 15 years of train maintenance. The FMECA results show that breakage of arc chute has the highest risk with 3rd severity class and 5th criticality class among all the components of high-speed circuit breaker. Damage and poor contact of electronic valve, and cylinder breakage with 3rd severity class and 4th criticality class are followed by. These results can be applied to improvement of design and maintenance process for high-speed circuit breaker of train.