• Journal of Applied Reliability
• /
• v.5 no.4
• /
• pp.427-438
• /
• 2005

This paper is concerned with the problem in predicting the reliability of an LCD product, Product reliability calculation methods classify accelerated life test (ALT) and using the reliability standard as MIL-HDBK-217F and Telcordia SR-332. The reliability standard can calculate estimating value more quickly than accelerated life test. The system MTBF was calculated in accordance of Telcordia SR-332 standard which includes directions of part electronic measurement, temperature rise and environmental test data. This research is intended to obtain the useful information for each electric design step to save time and cost.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.99-104
• /
• 2001

In this study, selecting methods of the hydraulic valve and evaluation item for development of reliability testing standard are c]early defined. And, we developed reliability testing standard of the hydraulic valves which are as follows, - Hydraulic directional control valve, - Hydraulic on-off solenoid valve - Hydraulic PWM valve, - Hydraulic check valve, - Hydraulic relief valve, - Hydraulic reducing valve, - Hydraulic flow control valve

• International journal of advanced smart convergence
• /
• v.10 no.3
• /
• pp.59-65
• /
• 2021

In this paper, we propose the AI certification standardization activities for systematic research and planning for the standardization of trustworthy artificial intelligence (AI). The activities will be in two-fold. In the stage 1, we investigate the scope and possibility of standardization through AI reliability technology research targeting international standards organizations. And we establish the AI reliability technology standard and AI reliability verification for the feasibility of the AI reliability technology/certification standards. In the stage 2, based on the standard technical specifications established in the previous stage, we establish AI reliability certification program for verification of products, systems and services. Along with the establishment of the AI reliability certification system, a global InterOp (Interoperability test) event, an AI reliability certification international standard meetings and seminars are to be held for the spread of AI reliability certification. Finally, TAIPP (Trustworthy AI Partnership Project) will be established through the participation of relevant standards organizations and industries to overall maintain and develop standards and certification programs to ensure the governance of AI reliability certification standards.

• International Journal of Highway Engineering
• /
• v.20 no.3
• /
• pp.39-46
• /
• 2018

PURPOSES: This study is to estimate nondestructive strength equation based on probability for bridges using field test data. METHODS : In this study, a series of the field inspection and the test have been performed on 297 existing bridges, in order to evaluate the bridges, based on the test results of the in-depth inspection, and the estimated strengths by means of the nondestructive strength equations are analyzed and compared with results of the core specimen strengths. RESULTS : According to results of analyses, In case of standard design compressive strength of concrete is 18MPa, 21MPa, similar reliability of RILEM equation were 0.89~0.90, but in case of standard design compressive strength of concrete is 35MPa, 40MPa were 0.4~0.56. According to standard design compressive strength of concrete is 40MPa, similar reliability of ultrasonic pulse velocity method equation were 0.56. CONCLUSIONS :RILEM equation had high similar reliability than other equation in case of standard design compressive strength of concrete is 18MPa, 21MPa, but had low similar reliability than other equation in case of standard design compressive strength of concrete is 35MPa, 40MPa. and ultrasonic pulse velocity method equation had low similar reliability than other equation in case of standard design compressive strength of concrete is 40MPa.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.173-178
• /
• 2002

Traditionally, for space program whose operation environment is severe, high reliability parts, that is class s microcircuit, JANS level semiconductor, and ER passive parts, are reliable choices. But in some case, we must use 'Non-standard Part' which is not verified as high reliability standard part. To use 'Non-standard Part' in space application, the manufacturer should qualify the part and screen potential week part from the flight lot. In this technical memo, I introduce the flight part verification process for KOMPSAT 1 and KOMPSAT 2 program.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.105-111
• /
• 2001

In this study, for improvement of pneumatic valve reliability, we grasped the falling-off problem in efficiency of domestic valve and performed detailed analysis the relating International standards, and we also decided sampling method and reliability evaluation items to be evaluated valves. And, in addition, we describe the developed evaluation standard to increase the competition power and to improve the reliability of domestic pneumatic valve manufacturers through deciding of test conditions and thesis of evaluation procedures to each evaluation items.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.10
• /
• pp.61-76
• /
• 2015

Recently, geotechnical engineering researches have been conducted on the Limit State Design (LSD) for deep and shallow foundations; however, there are very few studies on the retaining wall. As a basic study for the introduction of the LSD of a railway retaining wall, this study evaluates whether the reliability index satisfies the target reliability index for each failure mode in the standard drawing of the retaining wall. It also analyzes the feasibility of the LSD method by using the Load and Resistance Factor Design (LRFD) for the standard drawing of a retaining wall. In a portion of the standard drawing of the railway retaining wall, the reliability indices of the sliding and bearing capacity failure modes did not satisfy the target reliability index, and could not satisfy the limit state by the LRFD. Hence, the standard drawing of the railway retaining wall will need to be revised if the LSD is to be applied.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.7
• /
• pp.9-16
• /
• 2017

In this paper, we propose a development method of portable Automatic Test Equipment based on PXIe platform. Legacy VME form factor structured test equipment has limited reuse and expansion of modules due to unapplied bus specification. In particular, these limitations can cause development periods and costs to increase, and the reliability of environmental conditions is lacking due to non-standard modules. The test equipment of the proposed PXIe platform can use diverse COTS modules to shorten the development period and minimize the instability between developments. The PXIe development module works with standard Xilinx FPGAs, PXIe Windows device drivers, and applications on standard PXIe buses. The use of standard bus and COTS modules increases scalability and reusability, enabling rapid development and excellent maintenance. Through the test, we show the proposed test equipments can be implemented efficiently between the development processes and proved their reliability through function tests and environmental tests.

• Journal of Applied Reliability
• /
• v.11 no.4
• /
• pp.371-385
• /
• 2011

Because consumer mostly utilizes company test standard, supplier spends burden of expenses on building test equipments and managing expert manpower to fulfill consumer's various tests. Therefore, it is urgent to standardize test assessment which has a bond of sympathy between consumer and supplier and evaluates reliability of their products. This study develops reliability assessment standard which is composed of 12 test items considering international and domestic test standards, company internal test standards of consumer companies and field conditions. Also this study introduces overall technical procedure on accelerated test with no failure which is used for the main technology of reliability assessment. To verify effectiveness of reliability assessment, the test results are herein analyzed through building the test equipments and performing the test items.

• Structural Engineering and Mechanics
• /
• v.25 no.3
• /
• pp.347-363
• /
• 2007

A novel methodology, referred to as Auxiliary Domain Method (ADM), allowing for a very efficient solution of nonlinear reliability problems is presented. The target nonlinear failure domain is first populated by samples generated with the help of a Markov Chain. Based on these samples an auxiliary failure domain (AFD), corresponding to an auxiliary reliability problem, is introduced. The criteria for selecting the AFD are discussed. The emphasis in this paper is on the selection of the auxiliary linear failure domain in the case where the original nonlinear reliability problem involves multiple objectives rather than a single objective. Each reliability objective is assumed to correspond to a particular response quantity not exceeding a corresponding threshold. Once the AFD has been specified the method proceeds with a modified subset simulation procedure where the first step involves the direct simulation of samples in the AFD, rather than standard Monte Carlo simulation as required in standard subset simulation. While the method is applicable to general nonlinear reliability problems herein the focus is on the calculation of the probability of failure of nonlinear dynamical systems subjected to Gaussian random excitations. The method is demonstrated through such a numerical example involving two reliability objectives and a very large number of random variables. It is found that ADM is very efficient and offers drastic improvements over standard subset simulation, especially when one deals with low probability failure events.