• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권4호
• /
• pp.427-438
• /
• 2005

This paper is concerned with the problem in predicting the reliability of an LCD product, Product reliability calculation methods classify accelerated life test (ALT) and using the reliability standard as MIL-HDBK-217F and Telcordia SR-332. The reliability standard can calculate estimating value more quickly than accelerated life test. The system MTBF was calculated in accordance of Telcordia SR-332 standard which includes directions of part electronic measurement, temperature rise and environmental test data. This research is intended to obtain the useful information for each electric design step to save time and cost.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.99-104
• /
• 2001

In this study, selecting methods of the hydraulic valve and evaluation item for development of reliability testing standard are c]early defined. And, we developed reliability testing standard of the hydraulic valves which are as follows, - Hydraulic directional control valve, - Hydraulic on-off solenoid valve - Hydraulic PWM valve, - Hydraulic check valve, - Hydraulic relief valve, - Hydraulic reducing valve, - Hydraulic flow control valve

• International journal of advanced smart convergence
• /
• 제10권3호
• /
• pp.59-65
• /
• 2021

In this paper, we propose the AI certification standardization activities for systematic research and planning for the standardization of trustworthy artificial intelligence (AI). The activities will be in two-fold. In the stage 1, we investigate the scope and possibility of standardization through AI reliability technology research targeting international standards organizations. And we establish the AI reliability technology standard and AI reliability verification for the feasibility of the AI reliability technology/certification standards. In the stage 2, based on the standard technical specifications established in the previous stage, we establish AI reliability certification program for verification of products, systems and services. Along with the establishment of the AI reliability certification system, a global InterOp (Interoperability test) event, an AI reliability certification international standard meetings and seminars are to be held for the spread of AI reliability certification. Finally, TAIPP (Trustworthy AI Partnership Project) will be established through the participation of relevant standards organizations and industries to overall maintain and develop standards and certification programs to ensure the governance of AI reliability certification standards.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.39-46
• /
• 2018

PURPOSES: This study is to estimate nondestructive strength equation based on probability for bridges using field test data. METHODS : In this study, a series of the field inspection and the test have been performed on 297 existing bridges, in order to evaluate the bridges, based on the test results of the in-depth inspection, and the estimated strengths by means of the nondestructive strength equations are analyzed and compared with results of the core specimen strengths. RESULTS : According to results of analyses, In case of standard design compressive strength of concrete is 18MPa, 21MPa, similar reliability of RILEM equation were 0.89~0.90, but in case of standard design compressive strength of concrete is 35MPa, 40MPa were 0.4~0.56. According to standard design compressive strength of concrete is 40MPa, similar reliability of ultrasonic pulse velocity method equation were 0.56. CONCLUSIONS :RILEM equation had high similar reliability than other equation in case of standard design compressive strength of concrete is 18MPa, 21MPa, but had low similar reliability than other equation in case of standard design compressive strength of concrete is 35MPa, 40MPa. and ultrasonic pulse velocity method equation had low similar reliability than other equation in case of standard design compressive strength of concrete is 40MPa.

• 항공우주기술
• /
• 제1권2호
• /
• pp.173-178
• /
• 2002

전자부품 높은 신뢰성이 요구되며 극한의 운용 환경을 견디어야 하는 우주 프로그램에는 High-Reliability Part로 분류되는 Class S 이상의 Microcircuit, JANS 급 이상의 Discrete Semiconductor, 그리고 ER(Established Reliability) 등급 R 수준 이상의 Passive 소자들이 주로 사용된다. 그러나 일부 부품에 대해서는 High-Reliability Part로서 검증되지 않은 이른바 비표준 부품을 사용해할 경우가 빈번하게 생기고 있다. 이 경우 위성의 제작자는 자체적으로 부품을 검증하여 잠재적인 결함이 있는 부품들을 Screening할 수 있어야 한다. 본 기술 논문에서는 아리랑위성 1호기 및 2호기 개발을 통해서 이루어진 부품 검증과정을 간략히 소개하고자한다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.105-111
• /
• 2001

In this study, for improvement of pneumatic valve reliability, we grasped the falling-off problem in efficiency of domestic valve and performed detailed analysis the relating International standards, and we also decided sampling method and reliability evaluation items to be evaluated valves. And, in addition, we describe the developed evaluation standard to increase the competition power and to improve the reliability of domestic pneumatic valve manufacturers through deciding of test conditions and thesis of evaluation procedures to each evaluation items.

• 한국지반공학회논문집
• /
• 제31권10호
• /
• pp.61-76
• /
• 2015

최근 지반공학 분야에서는 깊은기초와 얕은기초에 관한 한계상태설계법에 관한 연구가 선행되고 있으며, 옹벽구조물에 관한 연구는 미미한 실정이다. 본 연구는 철도 옹벽의 한계상태설계법을 도입하기 위한 기초 연구로써 옹벽 표준도의 파괴모드별 신뢰도지수가 목표신뢰도지수를 만족하는지를 평가하였으며, 옹벽 표준도에 대한 하중저항계수 설계를 수행함으로써 한계상태설계법의 적용성을 분석하였다. 철도 옹벽 표준도의 일부는 활동 및 지지력파괴에 대한 신뢰도지수가 목표신뢰도지수에 미달하며, 하중저항계수설계법에 의한 한계상태를 만족하지 못하여 한계상태설계 도입 시 철도 옹벽 표준도의 수정이 필요한 것으로 평가되었다.

• 한국컴퓨터정보학회논문지
• /
• 제22권7호
• /
• pp.9-16
• /
• 2017

In this paper, we propose a development method of portable Automatic Test Equipment based on PXIe platform. Legacy VME form factor structured test equipment has limited reuse and expansion of modules due to unapplied bus specification. In particular, these limitations can cause development periods and costs to increase, and the reliability of environmental conditions is lacking due to non-standard modules. The test equipment of the proposed PXIe platform can use diverse COTS modules to shorten the development period and minimize the instability between developments. The PXIe development module works with standard Xilinx FPGAs, PXIe Windows device drivers, and applications on standard PXIe buses. The use of standard bus and COTS modules increases scalability and reusability, enabling rapid development and excellent maintenance. Through the test, we show the proposed test equipments can be implemented efficiently between the development processes and proved their reliability through function tests and environmental tests.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권4호
• /
• pp.371-385
• /
• 2011

Because consumer mostly utilizes company test standard, supplier spends burden of expenses on building test equipments and managing expert manpower to fulfill consumer's various tests. Therefore, it is urgent to standardize test assessment which has a bond of sympathy between consumer and supplier and evaluates reliability of their products. This study develops reliability assessment standard which is composed of 12 test items considering international and domestic test standards, company internal test standards of consumer companies and field conditions. Also this study introduces overall technical procedure on accelerated test with no failure which is used for the main technology of reliability assessment. To verify effectiveness of reliability assessment, the test results are herein analyzed through building the test equipments and performing the test items.

• Structural Engineering and Mechanics
• /
• 제25권3호
• /
• pp.347-363
• /
• 2007

A novel methodology, referred to as Auxiliary Domain Method (ADM), allowing for a very efficient solution of nonlinear reliability problems is presented. The target nonlinear failure domain is first populated by samples generated with the help of a Markov Chain. Based on these samples an auxiliary failure domain (AFD), corresponding to an auxiliary reliability problem, is introduced. The criteria for selecting the AFD are discussed. The emphasis in this paper is on the selection of the auxiliary linear failure domain in the case where the original nonlinear reliability problem involves multiple objectives rather than a single objective. Each reliability objective is assumed to correspond to a particular response quantity not exceeding a corresponding threshold. Once the AFD has been specified the method proceeds with a modified subset simulation procedure where the first step involves the direct simulation of samples in the AFD, rather than standard Monte Carlo simulation as required in standard subset simulation. While the method is applicable to general nonlinear reliability problems herein the focus is on the calculation of the probability of failure of nonlinear dynamical systems subjected to Gaussian random excitations. The method is demonstrated through such a numerical example involving two reliability objectives and a very large number of random variables. It is found that ADM is very efficient and offers drastic improvements over standard subset simulation, especially when one deals with low probability failure events.