• Journal of Korean Society of Rural Planning
• /
• v.13 no.3
• /
• pp.23-32
• /
• 2007

In Korea, a regulation of visual impact evaluation on development plan in natural environment is provided at the Natural Environment Conservation Act, but it was difficult to obtained the effectiveness enough to conserve natural landscape. So, the visual impact review on development plan is introduced to the act, through the revision of the Natural Environment Conservation Act in 2005. The basic directions of visual impact review are preservation, restoration, view protection, and harmony. The items of review are as follows; (1) development alternations for the provided plan, (2) executive reduction plan of visual impacts including consideration of growth of plants, (3) deliberation process between persons or parties concerned, etc. For rapid settlement of visual impact review system, it needs that the validity, the reliability, and the objectivity should be confirmed through steady research about reasonable guidance of review.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.352-356
• /
• 2018

This paper relates to a technology for monitoring a liquefied gas storage tank in the special gas field where demand is increasing owing to the continuous growth of related fields such as the semiconductor, display, and ICT convergence electronics industries. We have proposed a system for real - time monitoring using wireless sensor network technology, and implemented a system consisting of a sensor unit, transmitter module, and receiver module to be attached to a liquefied gas storage tank. The system was applied to LCO2 tanks among various liquefied gas storage tanks to verify the feasibility. The storage tanks employed in the experiments has capacities of 16,179 l and was 1,920 mm in inner diameter. Furthermore, the density was 1.03 g/l. The measured data were compared with reference data on the remaining gas level versus the $CO_2$ height of the surface, expressed using a conventional water meter, provided by an existing storage tank supplier. The experimental results show that the data is similar to the standard data provided by the tank supplier, and has a high accuracy and reliability within an error range of 0.03%.

• Korean Institute of Interior Design Journal
• /
• v.25 no.5
• /
• pp.63-70
• /
• 2016

Modern society is suffering from the phenomena of low-fertile, ultra-aging, and low-growth. On this social flow, most social classes undergo vulnerable situation and their overall housing and living condition have difficulties. So far many housing guidelines for diverse population were developed, recently, inclusive 'Customized Housing Design Guideline for Childcare Families' in terms of maintaining family and society has been completed. The purpose of this study is to analyze User Benefit Characteristics of 'Customized Housing Design Guideline for Childcare Families'. The research subjects are essential 140 guidelines appropriate to children's development and parents' care. The research method is contents analysis and the analysis criterion are 4 concepts of the User Benefit Criteria- 'Behavioral Facilitation (BF)', 'Physiological Maintenance (PhM)', 'Perceptual Maintenance (PM)', 'Social Facilitation (SF)'. 3 people inter-raters reliability was established. Altogether, the guidelines were rated in the order of PhM>PM>BF>SF, and these characteristics are similar as common universal design guidelines. This showed the supportability of spatial characteristics in the guidelines related to user's special behaviors. Also, the results show the importance of outdoor space planning for safe social interactions. The supportable characteristics of 'Customized Housing Design Guideline for Childcare Families' could be expected to efficiently apply for new housing development in the future.

• Membrane and Water Treatment
• /
• v.4 no.3
• /
• pp.157-174
• /
• 2013

The present study is devoted to the validation of a new method for in line electrokinetic characterisation of deposits on membrane surfaces. This method is based upon simultaneous measurements of transversal streaming potential and permeates flux at constant pressure before and during the deposit formation. Dead-end filtration experiments were conducted with negative flat membranes forming a narrow slit channel, negative hollow fiber membranes and mono-dispersed suspensions of (negatively charged) polystyrene latex and (positively charged) melamine particles at various concentrations. It was observed that the overall streaming potential coefficient increased in absolute value with the deposited latex quantity, whereas it decreased and changed of sign during the filtration of melamine suspensions. By considering a resistance-in-series model, the streaming potential coefficient of the single deposit ($SP_d$) was deduced from the electrokinetic and hydraulic measurements. The independence of $SP_d$ with respect to growth kinetics validates the measurement method and the reliability of the proposed procedure for calculating $SP_d$. It was found that $SP_d$ levelled off much more quickly when filtration was performed through the slit channel. This different behaviour could result from a non-uniform distribution of the deposit thickness along the membrane given that the position of measuring electrodes is different between the two cells.

• Journal of the Korean Society for information Management
• /
• v.25 no.1
• /
• pp.75-98
• /
• 2008

With explosive growth in the area of the Internet and IT services, various types of e-documents are generated and circulated. An e-Document is a sort of electronic records which a organization performs works and goals. In this study, we propose a security algorithm for secure use and distribution of e-documents. Especially, the proposed method can be applied to generate digital signature which can guarantee authenticity, integrity, confidentiality of an e-document and authenticate authorized users. Also, we can get higher security level as using a smart card that provides highly storing capacity and security. We carried out an experiment to verify efficiency and security of the proposed method.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.3
• /
• pp.73-80
• /
• 2018

The growth of Bandung's tourism industry has had a massive impact on the hotel sector. Most tourists visiting Bandung are domestic tourists and tend to be modest spenders fitting the profile of a mid-market (2/3 star) hotel guest. As competition has increased mid-market hotels have come under pressure from upmarket (4/5 star) and budget hotels committed to cutting prices. There is also competition with the mid-market hotel sector, which means that the 2/3 star hotels have to keep innovating in order to remain competitive. This study uses the Service Quality framework to describe customer expectations and identify gaps in hotel services. A questionnaire survey of 105 local tourists who had stayed in 2/3 star hotels in Bandung showed that the most important dimension is responsiveness, following by reliability, assurance, tangibles and empathy. Thus we conclude that local tourists' primary expectations are that hotels will deliver the service they have promised, be responsive to guests' needs and comply with service standards. Furthermore, these findings validate the earlier prediction that comparing 2/3 star hotel with 5/4 start hotel, the customers are having preliminary knowledge on facilities limitation and friendliness. Tourists using 2/3 star hotels tend to be prepared to accept limited facilities and less friendly staff service.

• Journal of Information Technology Services
• /
• v.12 no.3
• /
• pp.273-287
• /
• 2013

The objective of this study is to empirically develop performance evaluation measures for LIS (logistics information systems) based upon BSC (balanced scorecard) model and determine the relative importance among four perspectives of BSC using AHP (analytic hierarchy process) methodology. Above all, forty nine probable measures for evaluating LIS performance were identified through reviewing the previous research related with SCM (supply chain management), logistics management, and information systems evaluation. And then, these probable measures were examined by means of coincidence analyses using three mutually exclusive criteria(validity of content, ease of measurement and reliability of measurement). Data for conducting the coincidence analyses were collected from LIS users and LIS development personnel. As the results of the coincidence analyses, it was found that 31 ones among 49 probable performance evaluation measures theoretically derived could be qualified for LIS performance evaluation. And AHP analysis showed that the weight of each perspective was respectively as follows : 46.8% for financial perspective, 31.3% for customer perspective, 14.8% for internal business process perspective, and 7.1% for learning and growth perspective. The academic contribution of this study is that performance evaluation measures for LIS could be systematically and empirically developed on the basis of BSC. Also, the results of this study are expected to be used as a practice guideline of evaluating and improving LIS.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.1
• /
• pp.115-120
• /
• 2014

Wind power is a type of clean energy source which does not produce carbon dioxide. The wind turbine industry is considered as a major growth industry in many countries. The main cause of wind turbine failure arises in the wind turbine gearbox, and the main type of damage occurs in the bearings and gears. Therefore, predictions of gear and bearing damage are very important to ensure the reliability of the wind turbine reducers used in these systems. In this research, in order to optimize the wind turbine reducer, a series of simulations and redesigns was done using the tool RomaxDesigner. The RomaxDesigner model was used to analyze the bearing life of the duty cycle for a 5 MW wind-turbine pitch drive and to calculate the load in operating states. The reducer was designed to satisfy the life requirement by analyzing bearing damage and calculating the stress values of the main parts of the reducer.

• Journal of Arbitration Studies
• /
• v.30 no.1
• /
• pp.199-215
• /
• 2020

Compared to Korea's recently expanding art distribution market, the difficulty of securing the authenticity of art is hindering the healthy development and growth of the market. In this regard, the current situation of the emotional system in the UK and France's art distribution process are examined as excellent cases in foreign countries. In the UK, there is a full autonomous appraisal system by art experts without state intervention. In France, the judiciary and the administration of art have an appraisal system for art works, so the appraisal work has reliability and objectivity. Through the above system, this study suggests measures to strengthen transparency in art trade and to break unfair practices in order to secure the authenticity of the domestic art distribution market. In addition, this study proposes the establishment of a professional appraisal system and the improvement of administrative law regulations to explore the possibility of ensuring fairness through mediation through the example of an international arbitration body.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.537-544
• /
• 2003

This paper deals with stress corrosion cracking behavior of high strength steel exposed to marine environments. The objective is to determine the time to failure as a function of hydrogen concentration and tensile stress in the wires. A crack growth curve is modeled using finite element method (FEM) program. The coupled hydrogen diffusion-stress analyses of SCC were programmed separately. The first part is calculating stress and stress intensity /sup 1)/factor of a cylindrical shell, prestressing tendon or suspension bridge wires, from the initiation of cracks to rupture. Virtual crack extension method, contour integral method, and crack tip elements are used for the calculation of stresses in front of the crack tip. Comparisons of the result show a good agreement with the analytical equations and wire tests. The second part of the study deals with the programming of hydrogen diffusion, affected by hydrostatic stress, calculated at the location of boundary of plastic area around the crack tip. The results of paper can be used in the design and management of prestressed structures, cable stayed and suspension bridges. Time dependent correlated parallel reliabilities of a cable, composed of 36 wires, were evaluated by the consideration of the deterioration of stress corrosion cracking.