• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.1
• /
• pp.33-40
• /
• 2008

This paper proposes a sensorless drive method that estimates the rotor position by analysing Back EMF of single-phase Switched Reluctance motor (SRM). The rotor position information is necessary required, because SRM's torque is generated by exciting a stator winding according to rotor position. In order to detect the position of the rotor, the various rotor position sensors have been used. However, most of the position sensors not only increase the construction cost and the volume of the motor but also decrease reliability of driving system with environment. This paper proposed the method using the Back EMF to solve such problems. When a rotor and stator are overlapped, the Back EMF is sharply changed. By detecting this point, the rotor position can be estimated. Thus SRM is driven by turn on and turn off switches at the proper position through speed calculation. The validity of proposed method is verified through simulation and experiment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.169-173
• /
• 2010

Because of power consumption increase, global warming, and limitation of installation, not only high reliability and interruption capability but also compact and light power apparatuses are needed. In this paper, E field calculation and experiment were processed to identify the influence of the shape of end shield and gap distance. It is expected that the results of FEM simulation and experiments could be the basic data to develop VI. the results of FEM simulation and experiments are as following. Firstly, maximum E fields were compared by means of finite element method as a function of the shape of end shield. 3 types of models were used to analyze maximum E field of each model and the influence of shape of shield could be identified. As a result, proposed L type shield could reduce the maximum E field by 20%. Secondly, the influence of the gap distance between end shields on E field was analyzed. As the gap distance become short the gap distance between inner walls of ceramic also become short. And the maximum E field concentrated on inner wall of ceramic finally increased. Thirdly, the experiment was conducted by fabricating each prototype. As a result, no creepage occurred in shieldless model. In other words, creepage occurred in the shield-installed models. And creepage inception voltages were different from each other because of the difference of maximum E field. Fourthly, The equation that shows relation between calculated E field and measured creepage inception voltage was proposed as a result of FEM analysis and experiment. It is concluded that when designing VI this equation could be important data to reduce time and cost by identifying indirectly the optimal gap distance and the shape of shield required to prevent creepage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.2
• /
• pp.307-317
• /
• 2005

The purpose of this study are to examine the supply chain management (SCM) actiities of apparel manufacturers and then to investigate the relation between apparel manufacturers' SCM activities and their major textile suppliers' and retaileers' characteristics. The data was collected from the apparel manufacturers categorized into the six product areas - woman's formal dress(30%), boy and girl's casual wear (30%), man's formal dress(15%), sports and golf wear(10%), inner wear (10%) and infant & children's wear(5%) - headquartered in Seoul, by quota convenience sampling during August 14-September 4 in 2003. From 150 questionnires of delivery, 125 were collected and 123 from 64 manufacturers were used for analysis. The SPSSWIN 10.0 was used for frequency analysis, descriptive statistics analysis, factor analysis, reliability analysis and canonical correlation analysis. the results of the study are as follows : (1) The SCM activities of apparel manufacturers showed that the activity levels of the factors of information systems ans understanding of demand characteristics were ranked on top while the activity level of collaborative partnership factor was lowest. (2) As the level of SCM activities such as communication and exchange of opinion, and commitment and leadership of a top management became higher, the elements of delivery performance, interest in total cost and relationship of the textile suppliers were more improved. (3) The SCM activities such as communication an exchange of opinion, intgrated management organization, management flexibilty, and collaorative partnership contributed for improvement of collaborative relationship with retailers.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.136-140
• /
• 2011

Satellites industry has been developing with the commercial and military needs. Because power system of satellites is very important to survival operation and hard to test, increasing reliability is very critical. Especially LEO small satellites are very sensitive to power system, effective stabilization control is important. Because of various need of load condition, converter design are complicated. Therefore this paper introduced general modeling of LEO small satellite converter system and analyzed stabilization control design. The performance prediction of LEO small satellites power system is typically critical. Because of verity controller and rectification value, it is hard to computation and test implementation. So, this approach has merit that will reduce cost and make more reliable system. Furthermore, it can be constraint of converter specification and controller design. This paper will examine generation a modeling of LEO small satellites power converting system, and a possible guide line to design reliable controller which optimizing power converters of LEO small satellite.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.94-102
• /
• 2008

Capacitor switching is essential for the economic operation and proper voltage control of KOREA electric utility distribution system. Voltage transients produced by capacitor switching (around 2.0 per unit at substation and 2.5 or less per unit at customer site, and lasting less then 1[ms]) do not have the magnitude or duration to interfere with the operation of computers, but they do disrupt the operation of adjustable speed drivers. The result of our research, ASD manufacturers should learn from the computer industry and design products that will operate satisfactory In the electrical envelopment in which they will be placed. In this case history, the inductors on the input to ADSs in order to prevent nuisance tripping from capacitor switching(and other causes within the apartment) proved to be an effective, low-cost solution.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.363-366
• /
• 2006

In the port, Yard Crane is very important. If container crane or transfer crane broke down, it costs much money for delaying of work during the period of repair or reorder. But, we can not have enough spare parts for its high cost. It is necessary for having the reliability of crane through the effective preventive maintenance and failure analysis. In this paper, we analysed the system's function and failure mechanism of transfer crane which is main equipment in the yard. Also, we standardized the failure and maintenance work using the historical data of failure and maintenance. This study which is the basic work for IT of equipment operation and maintenance is going to be new attempt for optimal design of next generation equipment and operation policy of equipment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1907-1917
• /
• 2010

It is much needed research for ocean scientists to implement a digitizing system that effectively extracts and digitializes sea level records accumulated from the past. The main difficulty of such a system is huge anount of data to be processed. In this paper, we implement a digitizing system to handle such mass-data of sea level records. This system consists of a pre-process step, a digitizing step and a post-process step. In pre-process step, the system adjusts skewnesses of scanned images and normalizes the size of images automatically. Then, it extracts a graph area from images and thins the graph area in digitizing step. Finally, in the post-process step, the system tests the reliability. It is cost-effective and labour-reducing software for scientists not wasting their time to such boring manual digitizing jobs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.952-960
• /
• 2007

Most Websites perform login process for authentication. But simple features like ID and Password have no trust because most people worry about appropriation. So the youth can easily access illegal media sites using other's ID and Password. Therefore this paper examine features be adaptable to authentication system, and propose a design of authentication system using multiple features. A proposed authentication system has two categories, such as low-level and high-level method. Low-level method consists of grant of authentication number through mobile phone from server and certificate from authority. High-level method combines ID/Password and features of fingerprint, character, voice, face recognition systems. For this, this paper surveys six recognition systems such as fingerprint, face, iris, character, vein, voice recognition system. Among these, fingerprint, character, voice, face recognition systems can be easily implemented in personal computer with low cost accessories. Usage of multiple features can improve reliability of authentication.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1903-1910
• /
• 2009

In this paper, we were researched decision problem called an optimal release policies after testing a software system in development phase and transferring it to the user. The applied model of release time exploited infinite failure non-homogeneous Poisson process This infinite failure non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used the Weibull distribution which has the efficient various property which has the place efficient quality. Thus, optimal software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.3
• /
• pp.251-262
• /
• 2003

LCP(Life Cycle Profiles) of bridge structures are indispensable for the LCC(Life Cycle Cost) evaluations of bridge system. The bridge under considerations may be newly-designed one or one in service. Thus, a systematic study of LCP is essential for both reliable LCC evaluation and strategic bridge management. LCP is mainly influenced by the structural environment in nature. However, in Korea, LCC evaluation has been performed with the LCP of foreign research results or only with the pieces of professional engineers' opinion. Therefore, to alleviate the drawbacks of foreign LCP and to enhance the reliability of current LCP, LCP should be established using the available data in bridge management system(BMS). In this study, LCP along with a subset of the BMS data was investigated and several mathematical expressions were proposed and evaluated. The condition ratings of a bridge were trasformed into the numerical indices through fuzzy logics with real field data. From the numerical results, it is concluded that the mathematical LCP model of $y=\sqrt{y^2_0-at}$ is shown to be the fittest one (R=0.815) to express the condition rating varied with the age. This has been drawn from the case study of slab bridges under the similar conditions.