• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1496-1504
• /
• 2004

Web service should be to connect business between enterprise through the Internet, promotion of construction speed and decrease of development expense of service construction are possible. Also, unification with other domain is possible easily, and update or correction is easy by offering reusability and replaceability through component based development. In this paper, We suggest development process to build architecture and this to integrate consisted component efficiently to develop web service that is embodied in supplier side on service oriented architecture(SOA). The suggest architecture to integrate component that is consisted for this efficiently, and describes development process. So that component develops web service to base structure of web service because do command stratification logically function in each hierarchy define, and presents architecture based on logical hierarchy. The web services consist of Facade and Backside component; The Facade component have web service functions. We describe process that develop to Facade component and present mailing web services as case study. It can be decrease production cost and development time. The web service based on component will improve reliability for reuseability and replaceability.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.4
• /
• pp.139-148
• /
• 2014

With the development of IT, the financial sector has grown dramatically in Non face-to-face channel. However, because the initial costs calculation model which reflects the characteristics of the financial system does not exist, deteriorating reliability of budget establishment and low-price booking competition appeared. This negative situation leads to degradation of Internet Banking systems and customers who use these financial products have many troubles. Therefore, this paper improves the Initial Costs Expectation Model based on FPA & Expert Judgement Model. And it verified the effectiveness of this model through the regression analysis. As a result, we developed the Initial Costs Expectation Model for Internet Banking systems based on FPA, which is increased in accuracy than existing Cost Expectation Models.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.523-532
• /
• 2013

This study investigates risk reduction behavior with risk perception in outdoor wear purchase situations. Data were collected via a questionnaire from 400 consumers between the ages of 20 to 50 residing in Seoul and Kyonggi-do. Data analysis were conducted with SPSS 20 program on the reliability test, factor analysis, cluster analysis, t-test, ANOVA, and Duncan's multiple range test. Factor analyses were employed for the participation motivation of mountain climbing activities, risk reduction behavior and risk perception. Five factors were for the participation motivation of mountain climbing activities (health and fitness, external ostentation, achievement and excitement, improvement of climbing skills, and society). Five factors were for risk perception (fashionability loss and social risk, time and convenience loss, economic risk, performance risk, and psychological risk). Five factors were for the risk reduction behavior (interpersonal information sources use, marketer-dominated information sources use, professional information sources use, pre-purchase deliberation/observation/experience, and brand dependence). Three clusters were identified based on the motivation of outdoor activities (the affiliation/display, the health/internal informativeness and low motivation). The participation motivation for mountain climbing activities were varied. Manufacturers should increase efforts to develop products with good qualities at a reasonable cost as well as establish new marketing strategies since the risk of product performance and economic efficiency in the purchase of outdoor wear was a significant consumer perception.

• Journal of the Korean Institute of Gas
• /
• v.10 no.3 s.32
• /
• pp.13-19
• /
• 2006

As a way of improving the safety of the facilities, the risk based-inspection (RBI) was executed for the chemical facilities by using K-RBI program, which has been developed based on the API-581 based resource document (BRD). As the result of the evaluation, we found the level of the process safety management (PSM) for the applied plant, quantitative risk of the applied process, risk of static facilities and pipes, and the damage mechanism of the facilities. Thus, we could suggest a proper inspection frequency using the calculated risk of the process and the status of the facilities. The applied plant achieved a reduced inspection cost by an extension of the inspection frequency, improved productivity, improved reliability of the facilities, and a computerized history management.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1782-1789
• /
• 2008

This paper presents the design of acoustic resonance(AR) free and dimmable electronic ballast for 1kW Metal-Halide Lamp(MHL). The proposed Ballast consists of a Full-Bridge(FB) rectifier, a passive power factor correction(PFC) circuit, a full-bridge inverter, an ignitor using LC resonance and a control circuit for frequency modulation and dimming control. Whereas a passive PFC provides advantages in terms of high reliability and low cost for constructing the circuit, it is difficult to supply a stable voltage because of the output voltage ripple that occurs with a period of 120Hz. Although the ballast can be designed with a small size and a light weight if it is driven at a switching frequency between 1 and 100 kHz, AR will occur if the eigenvalue frequency of the lamp coincides with the inverter's operation frequency. The operation frequency was modulated in real time according to the output voltage ripple to compensate for the variation in power supplied to the lamp and eliminate AR. For dimming, the method, which modulated drive frequency of FB inverter using the control of DC level by microprocessor, was used. The Dimming ranged at least from 600W to 1kw as rated power of the lamp with 4 stages. Performance of the proposed technique was validated through numerical analysis, computer simulation using Pspice and by applying it to an electronic ballast for a prototype 1kW MHL.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.30-35
• /
• 2016

Tandem arc welding is a guarantor for high efficiency and cost saving since the quantity of wire which is deposited in the welding is approximated 30% greater that in conventional welding. The welding process is now being successfully applied in many industries. However, in the case of tandem arc welding, good quality and high productivity should depend on the welding parameters. Therefore, an intelligent algorithms for the automatic tandem arc welding process has been necessarily required. In this study, a predictive model based on the neural network by using the data acquired during tandem gas metal arc (GMA) welding process has been developed. To verify the reliability of the developed predictive model, a mutual comparison with the surface of the top-bead width obtained from actual experiments has been analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1062-1073
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. In developing a TS equation, it is assumed that the radiated pressure is known and the re-radiated intensity is unknown. This research provides a TS equation for polygonal plates, which is applicable to near field acoustics. In this research, Helmholtz-Kirchhoff formula is used as the primary equation for solving the re-radiated pressure field; the primary equation contains a surface (double) integral representation. The double integral representation can be reduced to a closed form, which involves only a line (single) integral representation of the boundary of the surface area by applying Stoke's theorem. Use of such line integral representations can reduce the cost of numerical calculation. Also Kirchhoff approximation is used to solve the surface values such as pressure and particle velocity. Finally, a generalized definition of Sonar Cross Section (SCS) that is applicable to near field is suggested. The TS equation for polygonal plates in near field is developed using the three prescribed statements; the redection to line integral representation, Kirchhoff approximation and a generalized definition of SCS. The equation developed in this research is applicable to near field, and therefore, no approximations are allowed except the Kirchhoff approximation. However, examinations with various types of models for reliability show that the equation has good performance in its applications. To analyze a general shape of model, a submarine type model was selected and successfully analyzed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.118-119
• /
• 2013

High power, short wavelength red laser diodes (LDs) have attracted significant interests in a variety of fields due to their advantages in terms of reliability, compactness and cost. The higher brightness for human eyes is required, the shorter wavelength like 630 nm is necessary with higher output power. In this respect, LDs are promising as alternative candidates of gas or dye lasers for such applications due to their small size, high optical/electrical power conversion efficiency, robustness and so on. The crystalline quality of GaInP-AlGaInP multiple quantum wells (MQWs) and AlInP cladding layers is a crucial part in the device performance of GaInP red LDs. Here, we first investigated the effect of Si diffusion on the optical properties of GaInP-AlGaInP MQWs grown with different growth temperatures. Secondary ion mass spectroscopy (SIMS) measurements revealed that both the Mg and Si diffusion into MQW active region was significant. To reduce such diffusion, we employed undoped Mg and Si diffusion barrier and could improve the properties.Without both Mg and Si diffusion barriers, no lasing emission was observed. However, lasing emission was observed clearly for the red LDs with both Mg and Si diffusion barriers. We then investigated the temperature dependent optical properties of MQW layers grown with different well thicknesses (6, 8 and 10 nm). When the well thickness was 10 nm, the better crystalline quality was obtained. However, the observed LD performances were similar, probably due to the defects and impurities in the AlGaInP layer. Further investigation with the detailed analyses will be presented later.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.1
• /
• pp.31-36
• /
• 1995

Solid dispersions and inclusion complex were prepared for the enhancement of solubility and dissolution rate of poorly water-soluble ibuprofen(IPF) as a model drug. Polyethylene glycol 4000(PEG4000) and polyvinylpyrrolidone(PVP) were used for the preparation of solid dispersion. $2-Hydroxypropyl-{\beta}-cyclodextrin(2-HP{\beta}CD)$ was also used for the preparation of inclusion complex. The solubility of IPF increased as the concentration of PEG4000, PVP and $2-HP{\beta}CD$ increased. Solubilization capacity of $2-HP{\beta}CD$ was increased about 10 times when compared to PEG 4000 and PVP. The dissolution rate of drug from solid dispersions and inclusion complex in the simulated gastric fluid was enhanced when compared to pure IPF and commercial $BR4^{\circledR}$ tablet as a result of improvement of solubility. In case of solid dispersions, dissolution rate of drug was proportional to polymer concentration in the formulation. The marked enhancement of dissolution rate of drug by inclusion complexation with $2-HP{\beta}CD$ was noted. However, dissolution rate of drug from solid dispersions and inclusion complex in the simulated intestinal fluid was not significant because IPF was readily soluble in that condition. From these findings, water-soluble polymers and cyclodextrin were useful to improve solubility and dissolution rate of poorly water-soluble drugs. However, easiness and reliability of preparation method, scale-up and cost of raw materials must be considered for the practical application of solid dispersion and inclusion complex in pharmaceutical industry.

• Design & Manufacturing
• /
• v.7 no.1
• /
• pp.45-49
• /
• 2013

Since the shell-molds are used to make casting the metal parts for the automobile industry, the quality may well be inconsistent with the lower productivity, increasing the cost of the end products. The primary elbow design shell molded steel castings being produced through extrusion process has $180^{\varnothing}$ O.D., $150^{\varnothing}$ I.D., 14mm thickness and 400mm length, while being processed onto the left side of the tubing. The primary cause for the poor processing is the uneven manual shell molding. If the manual shell molds should be produced to have even quality, they would not be processed for tube linking. The purpose of this study was to develop the flask-molds for manufacturing of the shell molds to ensure mass-production, consistent quality, ommission of processing and comfortable working environment. For this purpose, four flask-molds were produced and thereby, four shell molds were assembled. In particular, the shell molds for processing were formed of the fine coated sand to be blown. As a result, productivity increased about three times, while a consistent quality was ensured. Furthermore, the tubes could be linked with each other without being processed, while pallets could be stacked, stored, transported and managed more easily. In a nut-shell, the molding theory could be applied more effectively. However, it is conceived that this study should be followed up by future studies which will research into reliability and endurability of the end products.