• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.37-41
• /
• 2020

In this paper, we propose a routing method to improve the message transmission efficiency between DTN nodes in an environment where communication infrastructure in the city is destroyed. In the situation where a certain size of communication infrastructure can not function, the message transmission process between the nodes is explained. An effective routing method for improving reliability between nodes was proposed and evaluated using DTN simulator. The routing algorithm with improved reliability in urban areas was confirmed by simulation considering the message transmission relationship between nodes on uncertain path due to the destruction of communication infrastructure. We used a routing algorithm that includes all the contact information the node has experienced in the past. In the simulation of delivering messages in a situation where the communication infrastructure was destroyed, relatively better results were obtained than the existing routing algorithm.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1180-1187
• /
• 2020

A team of operators is required for nuclear power plant operation, and communication between the operators is an important aspect of the team's ability to successfully carry out tasks. It has been difficult to evaluate the quality of this communication though, and as the relationship between communication quality and team performance has yet to be clarified, it has not been applied to most human reliability analysis (HRA) methodologies. This study investigates the relationship between the quality of communication and team performance using data from a full-scope training simulator of a digital main control room (MCR). Two important characteristics of communication were considered to determine quality: each operator's ability to self-confirm the status of a given task in a digital MCR, and the type of communication, as divided into 1-way, 2-way, and 3-way between operators. To measure team performance, the concept of an unsafe act was employed, which is defined as a human error that has the potential to negatively affect plant safety. Analysis results showed that the communication quality and team performance were related to each other. With this more clearly defined relationship, the results of this study can be applied to related performance shaping factors to improve HRA.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.44-51
• /
• 2017

Accurate predictions of the activation time for smoke detectors using a fire simulation is are required to ensure the reliability of the RSET (Required Safe Egress Time) calculation in the process of PBD (Performance-Based Design). The objective of this study was to enhance the accuracy of input parameters for the numerical models of smoke detector based on the FDS. To this end, a Fire Detector Evaluator (FDE) developed in previous studies was improved. The uniformities of flow and smoke inside the FDE were improved and accurate measurements of the obscuration per meter (OPM) related to detector operation were also performed through a decrease in the forward scattering of smoke particles. The input parameters using the improved FDE showed a significant difference from the previous FDE quantitatively. In particular, a larger difference was found in a photoelectric detector compared to an ionization detector. Considering that the operating conditions of smoke detectors are affected by the detector type, combustibles, smoke particulars, and color, the database (DB) on the input parameters for various detectors and combustibles should be built to improve the reliability of PBD in future studies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.857-864
• /
• 1998

The infuluence of Doppler effects on the tracking performance of a noncoherent second-order delay locked loop (DLL) operating on a data modulated signal is investigated. For the perfoermance analysis we consider the tracking accuracy (steady state error and jitter) of the linear DLL and the reliability of the nonlinear loop. The nonlinear analysis concerning the loop reliability makes use of an asympototic expansion for the MTLL(mean time to lose lock) which has been derived by applying the singular perturbation method. In particular, we give optimal loop parameters and the optimal bandwidth of the bandpass filter in the loop arms to achieve a maximum MTLL. Since Doppler effects can be producesd comparatively in LEO system, we can espect the more reliable DLL loop design. by using the results of the circuit simulation, the delay lock loop is synthesized in FPGA, and verified to get the GPS data from the STR-2770 GPS simulator system. So, the synthesized logic circuit is shown be accurately performed.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.51-55
• /
• 2008

Request High-Images, High-quality, duplex transmission, BcN Voice telephone, Broadcast, Data internet service came to be all possible and demolished original communication service area. Also, The quality is guaranteed stablely to new business and ISP the requirement comes to become a multicasting quality guarantee mechanism which there is the reliability for a information communication and High-quality multimedia service. Like this, a multicast mechanism to be guaranteed must become air control End-to-End QoS for a service supply, a transmission delay a packet loss or requirement which the user requests guarantee and multicast Path-NET which there is the reliability must be provided. Therefor, we proposed IP base multicast new join the present the multicast mechanism of Probing packet foundation which there is the efficiently a linking acceptance, we used ns-2 simulator for the performance evaluation of the proposed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.83-89
• /
• 2021

With the recent development of information and communication technology, there have been many attempts to apply various IT technologies in the railway field. Until now, the safety control system has been installed at the site and operated using actual data, but there is a problem that it is difficult to verify the function of the railway safety control system in that no accidents occur in real situations. In this study, accident data is generated randomly to verify that the safety control system is functioning properly, and to this end, simulation data is prepared according to the simulator, accident scenario and scenario. Real-time railway safety monitoring system collects and transmits data from interface devices to common protocol called DDS.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.52-59
• /
• 2022

Currently, Korea is an aging society and is expected to become a super-aged society in about four years. X-ray devices are widely used for early diagnosis in hospitals, and many X-ray technologies are being developed. The development of X-ray device technology is important, but it is also important to increase the reliability of the device through accurate data management. Sensor nodes such as temperature, voltage, and current of the diagnosis device may malfunction or transmit inaccurate data due to various causes such as failure or power outage. Therefore, in this study, the temperature, tube voltage, and tube current data related to each sensor and detection circuit of the diagnostic X-ray imaging device were measured and analyzed. Based on QC data, device failure prediction and diagnosis algorithms were designed and performed. The fault diagnosis algorithm can configure a simulator capable of setting user parameter values, displaying sensor output graphs, and displaying signs of sensor abnormalities, and can check the detection results when each sensor is operating normally and when the sensor is abnormal. It is judged that efficient device management and diagnosis is possible because it monitors abnormal data values (temperature, voltage, current) in real time and automatically diagnoses failures by feeding back the abnormal values detected at each stage. Although this algorithm cannot predict all failures related to temperature, voltage, and current of diagnostic X-ray imaging devices, it can detect temperature rise, bouncing values, device physical limits, input/output values, and radiation-related anomalies. exposure. If a value exceeding the maximum variation value of each data occurs, it is judged that it will be possible to check and respond in preparation for device failure. If a device's sensor fails, unexpected accidents may occur, increasing costs and risks, and regular maintenance cannot cope with all errors or failures. Therefore, since real-time maintenance through continuous data monitoring is possible, reliability improvement, maintenance cost reduction, and efficient management of equipment are expected to be possible.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.650-656
• /
• 2023

This paper implements a channel model for mmWave bands using an NS-3-based 5G system-level simulator and analyzes the reliability and validity of the implemented model through RF performance verification. The channel model for RF performance verification in the mmWave bands consider parameters such as characteristics defined in 3GPP TR 38.901, beam-forming, antenna configuration, scenarios, among others. Furthermore, the simulation results verify compliance within the ranges permitted by the 3GPP standards and verify reliability in indoor environmental scenarios by exploiting the Radio Environment Map (REM). Therefore, the channel model implemented in this study is applicable to the actual design and establishment of 5G networks, presenting a method to evaluate and validate RF performance by adjusting various parameters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.877-881
• /
• 2008

In this paper, we propose a real-time people tracking system with multiple CCD cameras for security inside the building. The camera is mounted from the ceiling of the laboratory so that the image data of the passing people are fully overlapped. The implemented system recognizes people movement along various directions. To track people even when their images are partially overlapped, the proposed system estimates and tracks a bounding box enclosing each person in the tracking region. The approximated convex hull of each individual in the tracking area is obtained to provide more accurate tracking information. To achieve this goal, we propose a method for 3D walking human tracking based on the IMPRESARIO framework incorporating cascaded classifiers into hypothesis evaluation. The efficiency of adaptive selection of cascaded classifiers have been also presented. We have shown the improvement of reliability for likelihood calculation by using cascaded classifiers. Experimental results show that the proposed method can smoothly and effectively detect and track walking humans through environments such as dense forests.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.4
• /
• pp.589-595
• /
• 2014

The error of instrument transformers is measured by connecting the external burden with the secondary terminal of the instrument transformers. Because the error of transformer is affected by the apparent power and power factor of the external burden, an accurate measurement of burden is important for transformer evaluation. We have developed the burden evaluation equipment for both potential transformer and current transformer by employing the series resistor in the range of $20m{\Omega}{\sim}5{\Omega}$ and the parallel resistor in the range of $1M{\Omega}{\sim}500{\Omega}$, respectively, together with visual basic program. We could reduce testing time more than 5 times by employing method developed in this study, compared with that developed in past. This method shows more better reliability by analyzing the evaluation results and fitting graphs of burden measurements. The test results of the developed system is compared with those obtained in the power meter analyzer to verify the validity.