• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.50-56
• /
• 2019

Objective: The aim of this study is to analyze the reliability assessment of work environment measurement, and to propose ways of improving the system. Methods: We have reviewed reports and articles on the reliability assessment written by KOSHA and academia in order to analyze problems related with the system and propose the alternatives. Results: There are three ways to improve the system of the reliability assessment. First of all, it is necessary to perform the reliability assessment by measuring the work environment when workers raise questions about the results so we can make workers trust these results of the reliability assessment. Secondly, we should inspect the workplace at first, not the work environment service provider, so we can increase the employer's recognition of his duty to practice the work environment measurement. Thirdly, the technical committee is needed for technical issues related with the work environment measurement. Conclusions: Above all, it is crucial to get the workers' interest and trust to improve the work environment measurement. The reliability assessment should support the meaning and value of the work environment measurement by practicing the reliability assessment whenever workers have a demand for this and operating the technical committee.

• Information Systems Review
• /
• v.7 no.2
• /
• pp.117-128
• /
• 2005

This study proposes an integrated monitoring system for data reliability improvement in a steel manufacturing industry. The data obtained from existing steel manufacturing process is not micro data which is gathered at the occurring point, but average value (macro data) which is gathered from the occurring point to ending point. This kind of macro data is not only difficult for a detailed analysis for an error causing factor, but it might cause a fatal influence as well on the quality of produced goods even if the error is within an error tolerance. And during the process of steel production, thousands of data is produced in a second, thus requiring database plan to manage abundant amount of data. Therefore, the following proposed system is capable of collecting as well as analyzing all the data generated from the process of product production. And the system was able to raise the efficiency of the database server by planning the database to handle large capacity data. Also, by applying web-based technology, inquiries and analysis of data with no limit on time and space was possible with PC connected to the intranet. Hence, the system was able to work on effective quality improvement of manufactured products, plus able to raise the reliability of the product. Also, accumulated data from long period of time was used for fundamental material for new controlling model, operation technology, and new product development.

• Journal of Korean Academy of Nursing Administration
• /
• v.7 no.2
• /
• pp.285-300
• /
• 2001

To meet standards for high quality of care and satisfied customers, an evaluation tool about nursing care is necessary. And, We need to evaluate our practice continuously for the improvement in quality and outcomes. This study was intended to develop an evaluation tool about nursing care in NSICU, and was progressed of 3 steps; development, content validity verification and reliability verification. Data were obtained and analysed from Feb. To April, 2000. Development process of the study was as follows A preliminary list was made item by item on the basis of clinical Experience, literature review and patients' record review. Then the standards, criteria and indicators of preliminary evaluation tool were set by 5 clinical nursing panel, and their content validity was reviewed by 27 ICU nurses. Finally, an evaluation tool was developed and verified the reliability at c-university hospital located in Kwang-Ju. The results of this was as follows 1) The evaluation tool of this study developed 8 standards, 39 criterias and 106 indicators. The standards were divided into two dimensions. One was process dimension which contained 4 standards(26 criteria), The other was outcome dimension which contained 4 standards(13 criteria). 2) the Average content validity of the tool was 3.39 at standards, 3.55 at criteria and 3.51 at indicators. 3) Interrater reliability of the tool is r=.7993(p<.001) & internal consistency reliability ${\alpha}$ is .6031 4) Scores of NSICU Patients who participated in this study were 57 at total mean score, 58 at process mean score and 56 at outcome mean score The evaluation tool developed in this study seems to be useful in evaluation nursing practice appropriately for the improvement of nursing care in NSICU. I hope that this evaluation tool can be used effectively in NSICU as an intervention for the improvement of quality control.

• Safety and Health at Work
• /
• v.11 no.1
• /
• pp.10-18
• /
• 2020

Background: The elevated risk of occupational infection such as tuberculosis among health workers in many countries raises the question of whether the quality of occupational health and safety (OHS) and infection prevention and control (IPC) can be improved by auditing. The objectives of this study were to measure (1) audited compliance of primary health-care facilities in South Africa with national standards for OHS and IPC, (2) change in compliance at reaudit three years after baseline, and (3) the inter-rater reliability of the audit. Methods: The study analyzed audits of 60 primary health-care facilities in the Western Cape Province of South Africa. Baseline external audits in the time period 2011-2012 were compared with follow-up internal audits in 2014-2015. Audits at 25 facilities that had both internal and external audits conducted in 2014/2015 were used to measure reliability. Results: At baseline, 25% of 60 facilities were "noncompliant" (audit score<50%), 48% "conditionally compliant" (score >50 < 80%), and only 27% "compliant" (score >80%). Overall, there was no significant improvement in compliance three years after baseline. Percentage agreement on specific items between internal and external audits ranged from 28% to 92% and kappa from -0.8 to 0.41 (poor to moderate). Conclusion: Low baseline compliance with OHS-IPC measures and lack of improvement over three years reflect the difficulties of quality improvement in these domains. Low inter-rater reliability of the audit instrument undermines the audit process. Evidence-based investment of effort is required if repeat auditing is to contribute to occupational risk reduction for health workers.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.162-170
• /
• 2016

Purpose: The purpose of this study was to analyze the failure modes of an auto transfer switch (ATS), determine the most common failure mechanisms, and iterate the design to improve reliability. Methods: We carried out failure mode and effect analysis (FMEA) to determine the failure modes and mechanisms. We identified the parts or modules that required improvement via two-stage quality function deployment based on FMEA, and improvements to reliability were monitored using the Gomperz growth model. Results: The main failure modes of the ATS were damage to, and deformation of, the stator / movable element due to repetitive movements. Five iterations of design modification were carried out, and the mean time to failure (MTTF) increased to 14,539 cycles, corresponding to 85% of the target MTTF. The Gompertz growth model indicates that the 10th iteration of design modification is expected to achieve the target MTTF. Conclusion: We improved the reliability of mechanical parts via failure mode analysis, and characterized the iterative improvements in the MTTF using the Gompertz growth model.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.41-50
• /
• 2017

The purpose of this paper is to improve the service tree analysis introduced recently by Geum et al. [15]. Service tree analysis structures the service based on the customer participation perspective and provides a qualitative analysis method categorizing the service elements on the basis of its impact to top service. This paper attempts to apply the concept of reliability importance to the service tree analysis as a perspective of quantitative analysis, which is considered little in Geum et al. [15]. Reliability importance is a measure of the structural impact of the components that make up the system on the system lifetime in reliability engineering field and often used in fault tree analysis. We transform the reliability importance into service importance in accordance with service tree analysis, so that the influence of service elements on the service can be judged and compared. The service importance is defined as the amount of change of the service according to the change of the service element, therefore, it can be utilized as an index for determining a service element for service improvement. In addition, as an index for paired service elements, the relationship between the two service components can be measured by joint service importance. This paper introduces conceptual changes in the process of applying reliability importance to service analysis, and shows how to use the service importance for identifying the priority of service element for the final service and improving customer satisfaction through an example. By using the service importance and joint service importance in service tree analysis, it is possible to make efficient decision making in the process of determining the service elements for analyzing and improving the service.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.830-833
• /
• 2000

• JOURNAL OF ELECTRICAL WORLD
• /
• no.6 s.90
• /
• pp.10-14
• /
• 1984

• JOURNAL OF ELECTRICAL WORLD
• /
• no.1 s.157
• /
• pp.7-12
• /
• 1990

• The Magazine of the IEIE
• /
• v.23 no.4
• /
• pp.84-93
• /
• 1996