• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.293-300
• /
• 2023

The Shape Preferred Orientation (SPO) method has been used to analyze the orientation of fault motion, which is utilized as basic data for fault kinematics studies. The rigid grains, which as quartz, feldspar, and rock fragments, in the fault gouge are arranged in the P-shear direction through rigid body rotation by a given shear stress. Using this characteristic, the fault motion can be estimated from the SPO inversely. Recently, a method for securing precision and reliability by measuring 3D-SPO using X-ray CT images and examining the shape of a large number of particles in a short time has been developed. As a result, the SPO method analyzes the orientation of thousands to tens of thousands of particles at high speed, suggests the direction of fault motion, and provides easy accessibility and reliable data. In addition, the shape information and orientation distribution data of particles, which are by-products obtained in the SPO analysis process, are expected to be used as basic data for conducting various studies such as the local deformation of fault rocks and the fault generation mechanism.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.3
• /
• pp.155-163
• /
• 2023

Real-time monitoring technology is critical for ensuring the safety and reliability of nuclear power plant structures. However, the current seismic monitoring system has limited system identification capabilities such as modal parameter estimation. To obtain global behavior data and dynamic characteristics, multiple sensors must be optimally placed. Although several studies on optimal sensor placement have been conducted, they have primarily focused on civil and mechanical structures. Nuclear power plant structures require robust signals, even at low signal-to-noise ratios, and the robustness of each mode must be assessed separately. This is because the mode contributions of nuclear power plant containment buildings are concentrated in low-order modes. Therefore, this study proposes an optimal sensor placement methodology that can evaluate robustness against noise and the effects of each mode. Indicators, such as auto modal assurance criterion (MAC), cross MAC, and mode shape distribution by node were analyzed, and the suitability of the methodology was verified through numerical analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4B
• /
• pp.357-363
• /
• 2009

When yields the mean velocity of the closed conduit which is used generally, it is available to use Darcy Weisbach Friction Loss Head equation. But, it is inconvenient very because Friction Loss coefficient f is the function of Reynolds Number and Relative roughness (${\varepsilon}$/d). So, it is demanded more convenient equation to estimate. In order to prove the reliability and an accuracy of Chiu's velocity equation from the research which sees hereupon, proved agreement very well about measured velocity measurement data by using Laser velocimeter which is a non-insertion velocity measuring equipment from the closed conduit (Laser Doppler Velocimeter: LDV) and an insertion velocity measuring equipment and the Pitot tube which is a supersonic flow meter (Transit-Time Flowmeters). By proving theoretical linear-relation between maximum velocity and mean velocity in laboratory flume without increase and decrease of discharge, the equilibrium state of velocity in the closed conduit which reachs to equilibrium state corresponding to entropy parameter M value has a trend maintaining consistently this state. If entropy M value which is representing one section is determinated, mean velocity can be gotten only by measuring the velocity in the point appearing the maximum velocity. So, it has been proved to estimate simply discharge and it indicates that this method can be a theoretical way, which is the most important in the future, when designing, managing and operating the closed conduit.

• Asia Marketing Journal
• /
• v.15 no.3
• /
• pp.79-95
• /
• 2013

New product innovation is a process of embodying new knowledge in a product and technology licensing is getting popular as a means to innovations and introduction of new product to the market in today's competitive global market environment. Incumbents often rely on technology licensing to access new product opportunities created by other firms. Prior research has examined various aspects of technology licensing agreements such as specific contract terms of licensing agreements, e.g., distribution of control rights, exclusivity of licensing agreements, cross-licensing, and the scope of licensing agreements. This study aims to provide answers to an important, but under-researched question: why do some incumbents initiate more licensing agreement for exploratory learning while others do it for exploitative learning along the innovation process? We attempt to extend our knowledge of licensing agreements from an organizational learning perspective. Technology licensing as a specific form of interfirm linkages can be initiated with different learning objectives along the process of new product innovation. The exploratory stages of the innovation process such as discovery or research stages involve extensive searches to create new knowledge or capabilities, whereas the exploitative stages of the innovation process such as application or test stages near the commercialization are more focused on developing specific applications or improving their efficiency or reliability. Thus, different stages of the innovation process generate different types of learning and the resulting technological resources. We examine when incumbents as licensees initiate more licensing agreements for exploratory learning objectives and when more for exploitative learning objectives, focusing on two factors that may influence a firm's formation of exploratory and exploitative licensing agreements: 1) its past radical and incremental innovation experience and 2) its internal investments in R&D and marketing. We develop and test our hypotheses regarding the relationship between a firm's radical and incremental new product experience, R&D investment intensity and marketing investment intensity, and the likelihood of engaging in exploratory and exploitive licensing agreements. Using data collected from various secondary sources (Recap database, Compustat database, and FDA website), we analyzed technology licensing agreements initiated in the biotechnology and pharmaceutical industries from 1988 to 2011. The results of this study show that incumbents initiate exploratory rather than exploitative licensing agreements when they have more radical innovation experience and when they invest in R&D activities more intensively; in contrast, they initiate exploitative rather than exploratory licensing agreements when they have more incremental innovation experience and when they invest in marketing activities more intensively. The findings of this study contribute to the licensing and interfirm cooperation studies. First, this study lays a foundation to understand the organizational learning aspect of technology licensing agreements. Second, this study sheds lights on how a firm's internal investments in R&D and marketing are linked to its tendency to initiate licensing agreements along the innovation process. Finally, the findings of this study provide important insight to managers regarding which technologies to gain via licensing agreements. This study suggests that firms need to consider their internal investments in R&D and marketing as well as their past innovation experiences when they initiate licensing agreements along the process of new product innovation.

• Asia Marketing Journal
• /
• v.11 no.3
• /
• pp.91-124
• /
• 2009

With the intensity of competition and the standardization of technical attributes in telecommunications service market increasing, differentiated activity and customer experience in service encounter is regarded as an important means for creating customer value, however, there is a dearth of good literature examining what MOT activity is composed of according to consumption chain, and how service quality of MOT has influenced customer performance. Especially there exist various services across different phase of Product life cycle(PLC) in household telecommunication service market, customer requirement for MOT might depend on whether its phase is introduction-growth stage or maturity-decline stage, the empirical study is completely lacking. This study classified household telecommunication services into two types by PLC, VOIP and IPTV as Introduction-growth stage services, Internet and PSTN as maturity-decline stage service, and investigated whether there exists a gap between service types in how consumer have experienced MOT, what they consider as important and the relative importance of quality dimension how service quality of MOT has influence on consumer performance. The empirical result from 858 participants shows that there is a difference in consumer experience and requirements across different phases of the PLC, tangibles and assurance are regarded as the most important service quality factors which have a positive influence on customer performance (consumer satisfaction, repurchase intention and word of mouth) at the introduction-growth stage, whereas, reliability, empathy and interactivity are at the maturity-decline stage. Finally, managerial implication is made, limitation is clarified and a direction for further studies is suggested.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.531-541
• /
• 2023

The most important thing in the 4th industry, AI era, and smart construction era is digital data. Basic data in the civil engineering field begins with ground investigation. The Ministry of Land, Infrastructure and Transport operates the Geotechnical Information Database Center to manage ground survey data, including drilling but the focus is on data distribution. This study seeks to devise a plan for long-term use of the results of drilling investigation conducted for the design and construction of various construction projects. For this purpose, a pilot area was set up and a 'geotechnical design parameters digital map' was created using some geotechnical design parameters from the drilling investigation data. Using the developed algorithm, a digital map of friction angle and permeability coefficient for the hard rock stratum in the pilot area was created. Geotechnical design parameters digital map can identify the overall condition of the ground, but reliability needs to be improved due to the lack of initial data input. Through additional research, it will be possible to produce a more complete geotechnical design parameters digital map.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1011-1017
• /
• 2023

In this study, the harmless crack size (a_hml) by double shot peening (DSP) using shot balls with different diameters was evaluated on carburized, quenched-tempered SCM822H steel. The minimum crack size (a_NDI) detectable by non-destructive inspection was also evaluated. The relationship between the crack size (a_25,50) that reduces the fatigue limit by 25% and 50% and a_hml was evaluated. The residual stress of DSP was greater in SP_(0.6+0.08) than SP_(0.8+0.08) and appeared deeper in the depth direction. In addition, the hardness below the surface appeared larger. The fatigue limit of DSP increased 2.07 times and 1.95 times compared to non-SP. All a_hml of the DSP specimen was determined at the depth (a). The compressive residual stress distribution affects a_hml, and the a_hml of SP_(0.6+0.08), which has a large compressive residual stress and a high fatigue limit, appeared large. a_hml of SP_(0.6+0.08) introduced deeper than the residual stress of SP_(0.8+0.08) is larger in the range of As=1.0-0.3. Since the residual stress in the thickness direction has a greater effect on a_hml than the residual stress at the surface, it is necessary to introduce it more deeply. The relation of a_hml, a_25,50, and a_NDI were evaluated in the point for safety and reliability.

• Korean Journal of Culture and Social Issue
• /
• v.30 no.2
• /
• pp.159-192
• /
• 2024

The purpose of this study is to validate the Reactive-Proactive Aggression Questionnaire (RPQ), a tool for measuring reactive-proactive aggression, in the context of South Korea. A thorough translation was conducted in collaboration with the original author. An exploratory factor analysis (EFA), exploratory structural equation modeling (ESEM), rating scale model (Rasch), differential item functioning (DIF), and convergent validity were performed on a sample of 510 South Korean individuals. The results revealed a two-factor structure of reactive and proactive aggression after removing one item showing dual loading. Rating scale analysis based on the Rasch model indicated the appropriateness of the 3-point Likert scale, with all items meeting fit criteria. Although the separation index and separation reliability of proactive aggression was marginally lower, the overall discrimination between participants and items was satisfactory. Examination of participant-item distribution indicated a suitable alignment between reactive aggression and participant ability levels, whereas proactive aggression exhibited slightly elevated item difficulty. Furthermore, three items were found to function differently based on gender. A moderate but statistically significant positive correlation was found between the Barratt Impulsiveness Scale-11-R (Korean version) and RPQ from the results of the convergent validity evaluation. Overall, this study employed rigorous statistical methods to validate the suitability of the RPQ for use in Korea, taking cultural nuances into account, and introduced the concepts of reactive and proactive aggression to the Korean general population.

• Earthquakes and Structures
• /
• v.26 no.2
• /
• pp.97-115
• /
• 2024

In this paper, a database consisting of the dynamic shear modulus ratio and damping ratio test data of clay obtained from 406 groups of triaxial tests is constructed with the starting area of Xiong'an New Area as the research background. The aim is to study the nonlinear dynamic properties of clay in this area under cyclic loading. The study found that the effective confining pressure and plasticity index have certain influences on the dynamic shear modulus ratio and damping ratio of clay in this area. Through data analysis, it was found that there was a certain correlation between effective confining pressure and plasticity index and dynamic shear modulus ratio and damping ratio, with fitting degree values greater than 0.1263 for both. However, other physical indices such as the void ratio, natural density, water content and specific gravity have only a small effect on the dynamic shear modulus ratio and the damping ratio, with fitting degree values of less than 0.1 for all of them. This indicates that it is important to consider the influence of effective confining pressure and plasticity index when studying the nonlinear dynamic properties of clays in this area. Based on the above, prediction models for the dynamic shear modulus ratio and damping ratio in this area were constructed separately. The results showed that the model that considered the combined effect of effective confining pressure and plasticity index performed best. The predicted dynamic shear modulus ratio and damping ratio closely matched the actual curves, with approximately 88% of the data falling within ±1.3 times the measured dynamic shear modulus ratio and approximately 85.1% of the data falling within ±1.3 times the measured damping ratio. In contrast, the prediction models that considered only a single influence deviated from the actual values, particularly the model that considered only the plasticity index, which predicted the dynamic shear modulus ratio and the damping ratio within a small distribution range close to the average of the test values. When compared with existing prediction models, it was found that the predicted dynamic shear modulus ratio in this paper was slightly higher, which was due to the overall hardness of the clay in this area, leading to a slightly higher determination of the dynamic shear modulus ratio by the prediction model. Finally, for the dynamic shear modulus ratio and damping ratio of the engineering site in the starting area of Xiong'an New Area, we confirm that the prediction formulas established in this paper have high reliability and provide the applicable range of the prediction model.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.2
• /
• pp.159-179
• /
• 2024

Based on the case of collaboration between large companies and startups, this study suggests the importance of establishing mutual cooperation and trust relationships for the success of open innovation strategy from the perspective of cooperative game theory. It also provides implications for how this can be implemented. Due to information asymmetry and differences in organizational culture and decision-making structures between large companies and startups, collaboration is likely to proceed in the form of non-cooperative games among players in general open innovation, leading to the paradox of open innovation, which lowers the degree of innovation. Accordingly, this study conducted a case study on collaboration between large company 'G' and startup 'S' based on the research question "How did we successfully promote open innovation through cooperative game-type collaboration?" The study found that successful open innovation requires (1) setting clear collaboration goals to solve the organizational problem between large companies and startups, (2) supporting human resources for qualitative growth of startups to solve reliability problems, (3) leading to strategic investment and joint promotion of new projects to solve the profit distribution problem. This study is significant in that it contributes to expanding the discussion of the success factors of open innovation to the importance of interaction and strategic judgment considering the organizational culture and decision-making structure among players, and empirically confirming the success conditions of open innovation from the perspective of cooperative game theory.