• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.731-738
• /
• 1995

Toxic air pollutants are investigated in a petrochemical industrial park in Taiwan by using a movable open path FTIR. The results show the qualitative and quantitative analysis of emission gases from plants, and also provide the emission rate of different compounds. More than twenty compounds under usual operation are found from this industrial park. The concentration variation with time can be correlated exactly with wind direction. It means that by changing the measuring points, the source of emission can be unambiguously identified. An EPA proved PAL model is applied to estimate the emission rate of either a point or an area source. Local atmospheric stability is determined by releasing the $SF_6$ tracer. The origins of errors come mainly from the uncertainty of source's configuration and the variation of meteorological condition. Through the continuous measurement (half an hour base in this study) of OP-FTIR sensor, the maximum value of emission rate and the annual amount of emission can be derived. The emission rate of the measured toxic gases are derived by the model technique and the results show that the emission amount are in the order of ten to hundred tons per year.

• The Journal of the Korean dental association
• /
• v.51 no.3
• /
• pp.138-147
• /
• 2013

Orthodontic tooth movement is a unique process which tooth, solid material is moving into hard tissue, bone. Orthodontic force in general provides the strain to the PDL and alveolar bone, which in turn generates the interstitial fluid flow(in detail, fluid flow in PDL and canaliculi). As a results of matrix strain, periodontal ligament cells and bone cells are deformed, releasing variety of cytokines, chemokines, and growth factors. These molecules lead to the orthodontic tooth movement(OTM). In these inflammation and tissue remodeling sites, all of the cells could closely communicate with one another, flowing the information for tissue remodeling. To accelerate the rate of OTM in future, local injection of single growth factor(GF) or a combination of multiple GFs in the periodontal tissues might intervene to stimulate the rate of OTM. Corticotomy is effective and safe to accelerate OTM.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.2
• /
• pp.236-243
• /
• 2000

A number of developments have occurred over recent years that are being used commercially or have the potential to increase the milk yield and consequently the efficiency of dairy cows. Bovine growth hormone is the most widely known of several attempts that have been made to alter the metabolic endocrinology of dairy cows to increase the rate of milk secretion. The factors affecting the milk yield response to growth hormone, growth hormone-releasing factor, thyroxine and placental lactogen as well as to the immuno-neutralization of somatostatin are briefly considered. Secondly, the recent greater understanding of the mechanism by which the milk yield is increased following more frequent milking, which has resulted from the identification and characterization of the feedback inhibitor of lactation (FIL) protein, is reviewed. The identification of this protein provides new avenues of research which may lead to a reduction in the rate of decline in milk yield with advancing lactation or to undiminished milk yields despite a reduction in frequency with which the animals are milked.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.12
• /
• pp.1794-1802
• /
• 2001

Biotechnology will play critical role in improving animal productivity. Animal growth rate and muscle deposition potential can be greatly improved by the application of biotechnology and biotechnological products. Administration of recombinant somatotropin (ST) or other compounds such as IGF-1 and growth hormone-releasing peptides (GHRPs) can enhance growth rate and carcass lean percentage. Gene transfer offers a powerful approach to manipulate endocrine system and metabolic pathways toward faster growth and better feed efficiency. Biotechnology is also extensively used for improving metabolism and activity of gut microorganisms for better nutrient digestibility. Knockout of growth-inhibiting genes such as myostatin results in considerable acceleration of body weight and muscle growth. Animal growth can also be improved by the use of gene therapy. Immunomodulation is another approach for efficient growth through controlling the activity of endogenous anabolic hormones. All the above aspects will be discussed in this review.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.4
• /
• pp.207-211
• /
• 1993

Reservoir type devices were designed for long-term implantable drug delivery system. The reservoir type device was prepared with the polymethacrylic acid gel coated with polyurethane membrane. Release controlling agent (RCA) were employed to control drug release from devices via generation of micropores in the membranes. The polyurethane membrane functioned as a rate controlling barrier. The drug release pattern of hydrogel demonstrated zero order kinetics. The release rate of drugs could be regulated by varying hydrophobicity/hydrophilicity and content of the RCA, as well as the thickness of the polyurethane membrane. The release of drugs from this system was governed by pore mechanism via simple diffusion and osmotic pressure.

• Toxicological Research
• /
• v.9 no.1
• /
• pp.45-60
• /
• 1993

The present study was carried out to evaluate the cytotoxicity of cadmium on cultured rat fibroblasts. The colorimetric assays of neutral red and tetrazolium MTT, the lactatedehydrogenase activity, the amounts of total protein, the rate of DNA synthesis, the amounts of unscheduled DNA synthesis, the frequency of sister chromatid exchange, the releasing rate of intracellular calcium, and light and electron microscopic studies were performed on cultured rat fibroblasts maintained in the media containing various concentrations of cadmium. The results were as follows: The neutral red(NR) and MTT values were decreased dose-dependently by cadmium, and the NR90, NR50, MTT90 and MTT50 values of cadmium were 0.2mM, 21.5mM, 1.0Mm and 60.0Mm, respectively.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.3
• /
• pp.253-259
• /
• 2010

Objective: To evaluate if there is any correlation between the growth rate of dominant follicles and clinical characteristics or outcome variables in women undergoing controlled ovarian hyperstimulation (COH). Methods: This study was performed in 313 in vitro fertilization (IVF) cycles. Follicle stimulating hormone (FSH), luteinizing hormone (LH) and estradiol (E2) were measured on day 3 of menstrual cycle, and serial ultrasonographic measurement of the diameter of growing follicles was performed. The growth rates of dominant follicles calculated by diameter difference divided by days were correlated with clinical characteristics and outcome variables. Results: There was no significant difference in the growth rate of the dominant follicles between gonadotropin releasing hormone (GnRH) agonist and antagonist cycles. No significant correlation was found between the growth rates and evaluated factors such as age, body mass index, LH, FSH, $E_2$, retrieved oocytes and fertilization rate. Conclusion: The Growth rate of dominant follicles seems to show an independent feature of basal characteristics and ovarian response.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.1
• /
• pp.8-14
• /
• 2013

The newly developed fertilizer is the slow-releasing fertilizer which can be used as a basal fertilizer without no additional fertilization at tillering stage. It has 30-4-6% of $N-P_2O_5-K_2O$ and was coated with mixture of LDPE (Low density polyethylene), EVA (Ethylene vinyl acetate), BDP (Bio degraded polymer), TALC and nonionic surfactant for the controlled release up to 50 days after application. Coating materials were designed to be decomposed naturally. This fertilizer can be applied directly to the seedling tray mechanically just before transplanting, resulting in significant labor saving effect. The developed slow-release fertilizer, which can replace both basal fertilization and top dressing at tillering stage by single application directly to seedling tray, showed the highest release at 14~21 days after transplanting. Considering the plant growth at different growth stages and yield, the optimal application rate of developed slow-release fertilizer was 300 g per rice nursery tray and the yield of rice at this application rate was 5.25 MT/ha. Rice quality in terms of head rice grain ratio, amylose content, whiteness, and taste value decreased as fertilization rate increased from 200 g to 500 g per nursery tray. Fertilization rate based on quantity of fertilizer ingredients (N, P, K) was reduced by 49.3% compared to the standard application rate and there was 49.2% reduction in labor input for fertilization.

• Fisheries and Aquatic Sciences
• /
• v.9 no.2
• /
• pp.75-82
• /
• 2006

We evaluated the utility of applying isozyme analysis and two tagging methods, visible implant fluorescent elastomer (VIE) injection and uropod-cutting, to monitor the effects of releasing nursery-reared fleshy prawn (Fenneropenaeus chinensis) into natural habitat in Korea. One hundred thousand farmed prawns (70 mm long) were tagged by clipping off the outer left uropod and injecting them with VIE. This marked seed population was released at Muchangpo, Korea, on 11 and 19 July 2002. Two months later, total catch and catch per unit effort (CPUE) at three locations (Hongwon, Muchangpo, and Anmyundo) were determined. Total catch and CPUE increased nearly 18% over the previous year in Hongwon and Muchangpo. The mixing rate, estimated by uropod regeneration pattern, was 0.33% at Hongwon, 0.53% at Muchangpo, and 0.21% at Anmyundo. The recapture rate was about 3.5%. Isozyme analysis confirmed that the mixing rate was highest at Muchangpo. Moreover, fleshy prawns from Muchangpo were genetically most related to the seed population, indicating that the released prawns had largely remained near the released site. We also confirmed that isozyme genes are valuable as genetic markers for qualitative analyses of a released seed population.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.1
• /
• pp.63-67
• /
• 2009

The effects of adhesive substrates and bottom materials on the release of fertilized eggs by the Pacific cod, (Gadus macrocephalus) were examined to find an effective release method. Palm twin as an adhesive substrate displayed a significantly elevated adhesive rate compared to gulf weed. However, the survival rate of the fertilized eggs attached to palm twin was as low as 17.5% 8 days after fertilization (DAF). In contrast, fertilized eggs in the absence of adhesive substrate displayed the highest survival rate (47.0%). Concerning bottom materials, the survival rate of fertilized eggs on sand was significantly high (approximately 51.1%) on 8 and 9 DAF. The observations indicates that adhesive substrates are not needed and spawning ground bottom materials such as sand or mud should be considered when releasing fertilized eggs of Pacific cod.