• 제목/요약/키워드: Release effect

검색결과 2,884건 처리시간 0.029초

자발적 프로그램의 성과 분석: 30/50프로그램 중심으로 (Evaluating Performance of the 30/50 Program in Korea)

  • 김홍균;이강오;이윤수;이정민;허정;홍성신
    • 자원ㆍ환경경제연구
    • /
    • 제22권3호
    • /
    • pp.481-498
    • /
    • 2013
  • 본 논문은 업체들의 자발적인 참여를 통해 이루어지고 있는 우리나라의 대표적인 화학 유해물질 배출저감 프로그램인 30/50프로그램의 성과를 사업체별, 물질별, 연도별 미시적 패널자료를 이용하여 분석하였다. 2004년부터 2010년까지 7년간의 배출량 추이를 실증 분석한 결과에 따르면, 자발적 프로그램임에도 불구하고 프로그램에 참여한 업체들의 화학 물질 배출량이 비자발적 협약 업체에 비해 연간 2.7톤에서 1.2톤 적은 것으로 나타났다. 이와 같은 자발적 프로그램의 배출량 저감 효과는 협약물질에서 강하게 나타났을 뿐만 아니라 그 정도는 다소 약했지만 비협약물질에서도 나타났다. 이는 협약업체들이 전반적으로 화학유해물질을 저감하기 위한 기술을 도입한 결과라고 볼 수 있다.

Physical and Mechanical Properties and Fire-endurance Characteristics of Recycled Particleboards

  • Suh, Jin-Suk;Han, Tae-Hyung;Park, Joo-Saeng;Park, Jong-Young
    • 한국가구학회지
    • /
    • 제19권6호
    • /
    • pp.475-486
    • /
    • 2008
  • In this study, fire-retardant chemicals were melt with mixed composition ratios of dibasic ammonium phosphate and each half of boric acid and borax in hot water, in which hammer-milled chips were immersed to increase swelling of waste particleboards. Also, fire-retardant treated particles from sawn lumber chip and recycled particleboard chip were composed in ratio of 70:30 in core layer to improve boards' properties. Retention ratio of fire-retardant chemicals for the particles for face layer was high due to high specific surface area, and that of sawn lumber chips was somewhat higher than that of recycled particleboard chips. The mixture of particles from sawn lumber chips and recycled PB of 70:30 in weight ratio exceeded bending strength of 100 $kgf/cm^2$. It seemed that the relatively greater portions of dibasic ammonium phosphate affected adversely to dimensional stability, however fire-retardants treatment resulted in distinct effect lowering formaldehyde emission such as $E_0$ type(0.5mg/$\ell$ or less) in KS F 3104. In fire-retardancy, the recycled boards with a mixed ratio of dibasic ammonium phosphate to boric acid borax(50:50 mixture) of 70% to 30% in weight satisfied fire-retardancy 3rd grade in KS F 2271, and also this composition from cone calorimeter test met same standard grade figuring total heat release of 4.6MJ/$m^2$.

  • PDF

Comparision of Regulatory Action of cAMP and cGMP on the Activation of Neutrophil Responses

  • Han, Chang-Hwang;Yoon, Young-Chul;Shin, Yong-Kyoo;Han, Eun-Sook;Lee, Chung-Soo
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제1권1호
    • /
    • pp.97-105
    • /
    • 1997
  • The regulatory role of cyclic nucleotides in the expression of neutrophil responses has been examined. fMLP-stimulated superoxide production in neutrophils was inhibited by dibutyryl adenosine 3',5'-cyclic monophosphate (DBcAMP), histamine, adenosine + theophylline, cAMP elevating agents, and 8-bromoguanosine 3' ,5' -cyclic monophosphate (8-BrcGMP) and sodium nitroprusside, cGMP elevating agents. Staurosporine, a protein kinase C inhibitor, genistein, a protein tyrosine kinase inhibitor and chlorpromazine, a calmodulin inhibitor, inhibited superoxide production by fMLP, but they did not further affect the action of DBcAMP on the stimulatory action of fMLP. DBcAMP, histamine, adenosine+theophylline and genistein inhibited myeloperoxidease release evoked by fMLP, whereas BrcGMP, sodium nitroprusside and staurosporine did not affect it. The elevation of $[Ca^{2+}]_i$ evoked by fMLP was inhibited by genistein and chlorpromazine but was not affected by staurosporine. DBcAMP exerted little effect on the initial peak in $[Ca^{2+}]_i$ response to fMLP but effectively inhibited the sustained rise. On the other hand, BrcGMP significantly inhibited both phases. fMLP-induced $Mn^{2+}$ influx was inhibited by either DBcAMP or BrcGMP. These results suggest that fMLP-stimulated neutrophil responses may be regulated by cAMP more than cGMP. cAMP and cGMP appear not affect stimulated responses by direct protein kinase C activation. Their regulatory action on the stimulated neutrophil responses may be not influenced by other activation processes.

  • PDF

Adenosine과 $N^6-cyclopentyladenosine$이 활성화된 중성호성 백혈구에서 Superoxide 생성, 탈과립과 칼슘동원에 나타내는 영향 (Effects of Adenosine and $N^6-cyclopentyladenosine$ on Superoxide Production, Degranulation and Calcium Mobilization in Activated Neutrophils)

  • 김우정;신용규;한은숙;이정수
    • 대한약리학회지
    • /
    • 제31권3호
    • /
    • pp.333-344
    • /
    • 1995
  • fMLP에 의하여 자극된 중성호성 백혈구에서의 superoxide 생성, myeloperoxidase 유리, 칼슘 동원과 백혈구 부착에 나타내는 adenosine과 $N^6-cyclopentyladenosine$의 효과를 관찰하였다. 또한 이들의 효과를 C5a와 PMA의 자극효과에 대하여 그리고 lipopolysaccharide-primed 중성호성 백혈구의 반응에 대하여 관찰하였다. 이와 함께 adenosine의 억제작용에 있어 cAMP의 관여 여부를 조사하였다. 연구 결과로 부터 fMLP에 의해 자극된 중성호성 백혈구에서의 superoxide 생성, 탈과립과 세포내 칼슘 동원과 백혈구 부착은 adenosine 수용체에 의하여 조절된다고 추정된다. Adenosine은 protein kinase C의 활성화에 따른 백혈구 반응의 자극에 영향을 나타내지 않을 것으로 시사된다. Nonprimed 세포에 비하여, lipopolysaccharide-primed 중성호성 백혈구에서 fMLP에 의한 superoxide 생성은 adenosine의 영향을 적게 받을 것으로 여겨진다. Adenosine 존재하에서 백혈구 반응에 나타내는 theophylline의 억제효과는 세포내 cAMP 축적에 기인할 것으로 추정된다.

  • PDF

물질특성 및 운전조건을 고려한 증기상 물질의 2차 누출에 따른 폭발위험장소 범위 선정에 관한 연구 (A Study on Determination of Range of Hazardous Area Caused by the Secondary Grade of Release of Vapor Substances Considering Material Characteristic and Operating Condition)

  • 서민수;김기석;황용우;천영우
    • 한국가스학회지
    • /
    • 제22권4호
    • /
    • pp.13-26
    • /
    • 2018
  • 현재 KS Code 등 국내규정에서는 폭발위험장소의 범위를 계산하는 방법이 명확하게 나타나지 않아, 정확한 범위 선정을 위해서는 확산 모델링 해석을 이용하여야 한다. 본 연구애서는 대표적인 물질과 운전조건을 활용하여 확산 모델링에 비하여 간편하면서도 비교적 합리적인 폭발위험장소의 범위를 산정하는 방법을 제시하고자 하였다. 현재 시행되고 있는 국내외 표준을 바탕으로 폭발하한계(LFL, Lower Flammable Limit)까지 거리에 영향을 미치는 변수를 선정하였다. 총 16종의 인화성물질을 대상으로 물질변수, 운전변수, 기상조건에 대하여 모델링을 진행하였으며, 통계분석을 통해 영향을 미치는 변수를 선별하였다. 선별된 변수를 이용하여 폭발위험장소의 범위 선정을 위한 3단계 분류화 방법(3Step Classification Method)을 작성하였다.

고삼, 형개, 자초 혼합물(GHJ)의 인간비만세포에서의 항염증 효과 (The Inhibitory Effects of GHJ on Allergic Inflammatory Response in Human Mast Cells (HMC-1))

  • 황만기;최영진;김민주;이비나;정혁상;손영주
    • 대한한의학방제학회지
    • /
    • 제25권2호
    • /
    • pp.167-177
    • /
    • 2017
  • Objectives : This study aimed to evaluate inhibitory effects of GHJ on allergic inflammatory response in human mast cells (HMC-1). Methods : To investigate the inhibitory effect of GHJ (62.5, 125, 250, 500, $1000{\mu}g/mL$), HMC-1 cells were stimulated with phorbol 12-myristate 13-acetate plus calcium ionophore A23187 (PMACI). Enzyme-linked immunosorbent assays (ELISAs), RT-PCR and Western blot analysis were investigated using GHJ extract. Results : GHJ inhibited levels of $TNF-{\alpha}$ and IL-6 of $1000{\mu}g/mL$ concentration in ELISA and mRNA expression. GHJ had inhibitory effects in level of MAPKs, $p-I{\kappa}B-{\alpha}$ and p-NF-kB also. GHJ attenuated Compound 48/80-stimulated histamine release. In addition, GHJ inhibited PCA reaction in vivo. Conclusion : This study indicated that GHJ extract can inhibit allergic responses in HMC-1 cell.

입자상 물질의 습성 침적에 관한 수치 모의 (The Numerical Simulation on the Wet Deposition of Particles)

  • 김유근;이화운;홍정혜
    • 한국대기환경학회지
    • /
    • 제14권5호
    • /
    • pp.433-442
    • /
    • 1998
  • The removal procedure of particles in the atmosphere was simulated in the saturated and dry conditions to know the effect of the saturated atmosphere on the size distributions of particles. The particles were divided into 5 ranges, 0.0mm, 0.0∼0.65mm, 0.65∼2mm, 2∼10mm and more than 10mm, and the gases were classified into the smallest range for calculation. At the dry condition, particles grew only by the collision -coalescence and were removed by gravitation. The particles in the range of 2.0∼10mm fell mostly at the 30 km distance from the pollutant source because of gravitation. The particles larger than 10 pm were removed at the 10 km distance from the pollutant source because of their gravity. But the particles larger than 10pm appeared again at more than 30km distance. It is considered that they have been grown during the smaller particles had been advected and diffused at that distance, and it needed about 1 hour from the moment of release. At the saturated condition, particles grew by both the collision-coalescence and condensation. The model showed that the condensation makes more number of particles larger than 10mm and then the particles were removed due to their large gravity. Only a few particles existed at the range of 0.65∼10mm and larger thats 10mm. It is concluded that the saturated atmosphere is effective on removing PM-10.

  • PDF

Effectiveness of Bioremediation on Oil-Contaminated Sand in Intertidal Zone

  • Oh, Young-Sook;Sim, Doo-Suep;Kim, Sang-Jin
    • Journal of Microbiology and Biotechnology
    • /
    • 제13권3호
    • /
    • pp.437-443
    • /
    • 2003
  • Bioremediation technologies were applied to experimental microcosms, simulating an oil spill in a lower intertidal area. Three treatments (oil only, oil plus nutrients, and oil plus nutrients and microbial inocula) were applied, and each microcosm was repeatedly filled and eluted with seawater every 12 h to simulate tidal cycles. To minimize washing-out of the inoculum by the tidal cycles, microbial cells were primarily immobilized on diatomaceous earth before they were applied to the oiled sand. Oil degradation was monitored by gravimetric measurements, thin layer chromatography/flame ionization detector (TLC/FID) analysis, and gas chromatography (GC) analysis, and the loss of oil content was normalized to sand mass or nor-hopane. When the data were normalized to sand mass, no consistent differences were detected between nutrient-amended and nutrient/inoculum-amended microcosms, although both differed from the oil-only microcosm in respect of oil removal rate by a factor of 4 to 14. However, the data relative to nor-hopane showed a significant treatment difference between the nutrient-amended and nutrient/inoculum-treated microcosms, especially in the early phase of the treatment. The accelerating effect of inoculum treatment has hardly been reported in studies of oil bioremediation in the Tower intertidal area. The inoculum immobilized on diatomaceous earth seemed to be a very effective formulation for retaining microbial cells in association with the sand. Results of this study also suggest that interpretation of the effectiveness of bioremediation could be dependent on the selection of monitoring methods, and consequently the application of various analytical methods in combination could be a solution to overcome the limitations of oil bioremediation monitoring.

Investigation of Possible Gene Transfer to Soil Microorganisms for Environmental Risk Assessment of Genetically Modified Organisms

  • Kim, Young-Tae;Park, Byoung-Keun;Hwang, Eui-Il;Yim, Nam-Hui;Kim, Na-Rae;Kang, Tae-Hoon;Lee, Sang-Han;Kim, Sung-Uk
    • Journal of Microbiology and Biotechnology
    • /
    • 제14권3호
    • /
    • pp.498-502
    • /
    • 2004
  • The current study was conducted to monitor the possibility of the gene transfer among soil bacteria, including the effect of drift due to rain and surface water, in relation to the release of genetically modified organisms into the environment. Four types of bacteria, each with a distinct antibiotic marker, kanamycin-resistant P. fluorescens, rifampicin-resistant P. putida, chloramphenicol-resistant B. subtilis, and spectinomycin-resistant B. subtilis, were plated using a small-scale soil-core device designed to track drifting microorganisms. After three weeks of culture in the device, no Pseudomonas colonies resistant to both kanamycin and rifampicin were found. Likewise, no Bacillus colonies resistant to both chloramphenicol and spectinomycin were found. The gene transfer from glyphosate-tolerant soybeans to soil bacteria, including Rhizobium spp. as a symbiotic bacteria, was examined by hybridization using the DNA extracted from soil taken from pots, in which glyphosate-tolerant soybeans had been growing for 6 months. The results showed that 35S, T-nos, and EPSPS were observed in the positive control, but not in the DNA extracted from the soilborne microorganisms. In addition, no transgenes, such as the 35S promoter, T-nos, and EPSPS introduced into the GMO soybeans were detected in soilborne bacteria, Rhizobium leguminosarum, thereby strongly rejecting the possibility of gene transfer from the GMO soybeans to the bacterium.

Numerical modeling and prediction of adhesion failure of adhesively bonded composite T-Joint structure

  • Panda, Subhransu K;Mishra, Pradeep K;Panda, Subrata K
    • Structural Engineering and Mechanics
    • /
    • 제74권6호
    • /
    • pp.723-735
    • /
    • 2020
  • This study is reported the adhesion failure in adhesive bonded composite and specifically for the T-joint structure. Three-dimensional finite element analysis has been performed using a commercial tool and the necessary outcomes are obtained via an eight noded solid element (Solid 185-element) from the library of ANSYS. The structural analysis input has been incurred through ANSYS parametric design language (APDL) code. The normal and shear stress distributions along different layers of the joint structure have been evaluated as the final outcomes. Based on the stress distributions, failure location in the composite joint structure has been identified by using the Tsai-Wu stress failure criterion. It has been found that the failure index is maximum at the interface between flange and web part of the joint (top layer) which indicates the probable location of failure initiation. This kind of failures are considered as adhesion failure and the failure propagation is governed by strain energy release rate (SERR) of fracture mechanics. The different adhesion failure lengths are also considered at the failure location to calculate the SERR values i.e. mode I fracture (opening), mode II fracture (sliding) and mode III fracture (tearing) along the failure front. Also, virtual crack closure technique (VCCT) principle of fracture mechanics steps is used to calculate the above said SERRs. It is found that the mode I SERR is more dominating compared to other two modes of failure for the joint considered. Finally, the influences of various parametric (geometrical and material) effect on SERR of the joint structure are evaluated and discussed in details.