• 한국통신학회논문지
• /
• 제33권1A호
• /
• pp.36-43
• /
• 2008

본 논문에서는 디코딩 후 전달 시스템을 위한 최적의 중계노드 선택방법을 제안한다. 그 최적의 중계노드 선택 방법은 디코딩 후 전달 시스템에서 신호 중계를 위해 사용되는 시간슬롯을 최소화하고 최종 신호 대 잡음비를 최대화한다. 그러나, 중계노드 선택을 위한 시스템의 오버 헤드가 요구된다. 독립적이고 동일한 레일레이 분포를 따르는 채널들을 가정하여, 제안된 최적의 중계노드 선택방법 기반의 디코딩 후 전달방식에 대한 용량 저하 확률과 평균 비트 오차율의 식들을 유도하고, 그 식들의 수치적 결과와 시뮬레이션 결과를 비교하여 수식들을 검증한다. 중계노드의 개수가 각각 2, 4, 8이고 오버 헤드에 대한 시간슬롯의 개수가 각각 1, 2, 4일 때, 제안된 방식은 기존의 디코딩 후 전달방식보다 1% 비트 오차율에서 각각 1 dB, 2 dB, 3 dB의 이득이 있고, 1 bps/Hz에 대한 1% 용량 저하 확률에서 각각 0.5 dB, 4 dB, 12 dB의 이득이 있다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권1호
• /
• pp.44-49
• /
• 2003

This paper describes a percentage current differential relaying algorithm for bus protection blocked by a CT saturation detection algorithm. The detection algorithm blocks the output of a current differential relay only if a differential current is caused by CT saturation in the case of an external fault. Moreover, if a current differential relay operates faster than the detection algorithm, the blocking signal is not ignited. On the other hand. if the detection algorithm operates faster than a current differential relay, the output of the relay is blocked. The results of the simulation show that the proposed algorithm can discriminate internal faults from external faults ever when a CT is saturated in both cases. This paper concludes by implementing the algorithm into the TMS320C6701 digital signal processor. The results of hardware implementation are also satisfactory The algorithm can not only increase the sensitivity of the current differential relay but Improve the stability of the relay for an external faults.

• 한국ITS학회 논문지
• /
• 제12권3호
• /
• pp.87-95
• /
• 2013

본 논문에서는 다중 홉 시스템에서 하나의 홉에 대한 채널 정보만을 이용하는 효율적인 부분 중계 노드 선택(efficient partial relay selection, EPRS) 기법에 대한 아웃티지 확률을 레일레이 페이딩 채널에서 분석한다. 특히, 디코딩 후 전달 중계 기반의 EPRS 기법에 대한 정확한 아웃티지 확률의 식을 유도한다. 또한, 다중 홉 시스템에서 EPRS 기법의 실효성을 확인하기 위하여, 임의의 중계 경로에서 종단간 신호 대 잡음비와 각 홉의 신호 대 잡음비의 상관관계를 분석한다. 그리고, 수치적 결과를 통해 EPRS 기법과 모든 채널 정보를 이용하는 중계 노드 선택 기법의 아웃티지 성능을 비교한다.

• Journal of Communications and Networks
• /
• 제10권2호
• /
• pp.175-185
• /
• 2008

In this paper, we investigate the effect of cooperative and selection relaying schemes on multiuser diversity in downlink cellular systems with fixed relay stations (RSs). Each mobile station (MS) is either directly connected to a base station (BS) and/or connected to a relay station. We first derive closed-form solutions or upper-bound of the ergodic and outage capacities of four different downlink data relaying schemes: A direct scheme, a relay scheme, a selection scheme, and a cooperative scheme. The selection scheme selects the best access link between the BS and an MS. For all schemes, the capacity of the BS-RS link is assumed to be always larger than that of RS-MS link. Half-duplex channel use and repetition based relaying schemes are assumed for relaying operations. We also analyze the system capacity in a multiuser diversity environment in which a maximum signal-to-noise ratio (SNR) scheduler is used at a base station. The result shows that the selection scheme outperforms the other three schemes in terms of link ergodic capacity, link outage capacity, and system ergodic capacity. Furthermore, our results show that cooperative and selection diversity techniques limit the performance gain that could have been achieved by the multiuser diversity technique.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권3호
• /
• pp.1140-1155
• /
• 2021

Up to now, many state-of-arts have been proposed for two-way relaying system with linear modulations. The performances of antenna selection (AS) at both transmit and relay nodes need to be investigated in some two-way relaying multiple-input multiple-output (TWRM) systems. In this paper, the goal is focused on the study of nonlinear modulations, i.e., continuous phase modulation (CPM) in TWRM systems. Firstly, the joint phase trellis are simplified by reversed Rimoldi processing so as to reduce the systems' complexity. Then the performances of joint transmit and receive antenna selection (JTRAS) with CPM modulations in two-way relaying MIMO systems are analyzed. More exactly, the pair wise probability (PEP) is used to evaluate the error performance based on the CPM signal matrix, which is calculated in terms of Laurent expression. Since the channels subject to two terminal nodes share common antennas at relay node R in multiple-access scheme, we revise the JTRAS algorithm and compare it to existing algorithm via simulation. Finally, the error performances for various schemes of antenna selection are simulated and compared to the analysis in this paper.

• 디지털산업정보학회논문지
• /
• 제18권4호
• /
• pp.13-21
• /
• 2022

Recently, in wireless video sensor networks(WVSN), various schemes for efficient video data transmission have been studied. In this paper, a layer based cooperative relaying(LCR) algorithm is proposed for minimizing scalable video transmission distortion from packet loss in WVSN. The proposed LCR algorithm consists of two modules. In the first step, a parameter based error propagation metric is proposed to predict the effect of each scalable layer on video quality degradation at low complexity. In the second step, a layer-based cooperative relay algorithm is proposed to minimize distortion due to packet loss using the proposed error propagation metric and channel information of the video sensor node and relay node. In the experiment, the proposed algorithm showed that the improvement of peak signal-to-noise ratio (PSNR) in various channel environments, compared to the previous algorithm(Energy based Cooperative Relaying, ECR) without considering the metric of error propagation.The proposed LCR algorithm minimizes video quality degradation from packet loss using both the channel information of relaying node and the amount of layer based error propagation in scalable video.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.288-290
• /
• 1999

In view of the importance of DFT(Discrete Fourier Transform) in spectrum analysis, its computation efficiency is a topic. This paper presents calculation time to extract the power frequency at a fault signal using DFT. Furthermore, it is tested a relaying algorithm based on modified DFT and its application to Micro-controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.375-379
• /
• 1990

A microprocessor-based multi-function switchgear for the protection, measurement and control of the power system is presented. For the extraction of the RMS values of the fundamental components of current and voltage signals, a simple digital filter based on cross-correlation of the distorted signal with even and odd heptagonal waves is used. The frequency response of this filter is almost identical to that of the filter based on the discrete fourier transform, while its computational requirement is far less. For the time delay element relaying, a new log-table based relaying algorithm is suggested. The suggested use of the heptagonal wave cross-correlation digital filter algorithm and a new relaying algorithm reduce the computational needs so drastically that all functions of the switchgear can be implemented on the microprocessor system. Real time testing of the implemented daboratory prototype show good practical response under different operating conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.509-512
• /
• 1995

The relaying algorithm to calculate the fault distance from only transient signal at faults in T/L is presented. In this paper. At faults the oscillation frequency components exist in both voltage and current and these components minimize the input impedance shown in fault point. The equivalent source impedance shown in relaying point is needed to calculate the fault distance using these components. To source impedance, the reflection coefficient between forward wave and backward and the Prony's analysis is also employed to extract the oscillation frequency component from transient signals. The case study show that the new distance relaying algorithm satisfies the high operation speed and high accuracy even if the algorithm uses only transient signals.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.102-108
• /
• 2008

AC generator plays an important role of power system. The large AC generator fault may lead to large impacts or perturbations in power system. And then the protection of a generator has very important role in maintaining stability in a power system. In present, the DFT(discrete Fourier transform) based RDR(ratio differential relay) had been widely applied to a internal fault of a generator stator winding. But DFT has a serious drawback. In the course of transforming a target signal to frequency domain, time information is lost. DWT uses a time-scale region. This paper proposes an advanced fault detection algorithm using DWT(discrete Wavelet transform) to enhance the drawback of conventional DFT based relaying. To evaluate the performance of the proposed relaying, we used the test data which were sampled with 720 [Hz] per cycle and obtained from ATP(alternative transient program) simulation. And we made a comparative study of conventional DFT based RDR and the proposed relaying.