• 전기학회논문지
• /
• 제60권11호
• /
• pp.2000-2006
• /
• 2011

Asynchronous phenomenon occurs on the synchronous generators under power system when a generator's amplitude of electromagnetic force, phase angle, frequency and waveform etc become different from those of other synchronous generators which can follow instantly varying speed of turbine. Because the amplitude of electromagnetic force, phase frequency and waveform differ from those of other generators with which are to be put into parallel operation due to the change of excitation condition for load sharing and the sharing load change, if reactive current in the internal circuit circulates among generators, the efficiency varies and the stator winding of generators are overheated by resistance loss. Where calculation method of protection settings and Logic for Protection of Generator Asynchronization will be recommended, A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome asynchronizing protection this paper describes an improved backup protection coordination scheme using a new Logic that will be suggested.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권12호
• /
• pp.5862-5887
• /
• 2019

In this paper, we propose a two-way relaying scheme using non-orthogonal multiple access (NOMA) technology. In this scheme, two sources transmit packets with each other under the assistance of the decode-and-forward (DF) relays, called as a TWDFNOMA protocol. The cooperative relays exploit successive interference cancellation (SIC) technique to decode sequentially the data packets from received summation signals, and then use the digital network coding (DNC) technique to encrypt received data from two sources. A max-min criterion of end-to-end signal-to-interference-plus-noise ratios (SINRs) is used to select a best relay in the proposed TWDFNOMA protocol. Outage probabilities are analyzed to achieve exact closed-form expressions and then, the system performance of the proposed TWDFNOMA protocol is evaluated by these probabilities. Simulation and analysis results discover that the system performance of the proposed TWDFNOMA protocol is improved when compared with a conventional three-timeslot two-way relaying scheme using DNC (denoted as a TWDNC protocol), a four-timeslot two-way relaying scheme without using DNC (denoted as a TWNDNC protocol) and a two-timeslot two-way relaying scheme with amplify-and-forward operations (denoted as a TWANC protocol). Particularly, the proposed TWDFNOMA protocol achieves best performances at two optimal locations of the best relay whereas the midpoint one is the optimal location of the TWDNC and TWNDNC protocols. Finally, the probability analyses are justified by executing Monte Carlo simulations.

• 한국통신학회논문지
• /
• 제37권6A호
• /
• pp.405-419
• /
• 2012

본 논문에서는 다중 릴레이와 다중 사용자가 존재하고, 모든 노드에 다중 안테나가 탑재된 시스템에서 기지국, 릴레이 전처리기 공동 설계 기법을 제안한다. 설계 기준은 릴레이가 각자의 지역 채널 정보만 취할 수 있고, 전체 릴레이 합 전력 제약 환경일 때, 사용자 평균 자승 오류의 합(sum mean square error, SMSE)을 최소화하는 것이다. 한 릴레이의 지역 채널 정보는, 시스템의 모든 첫 번째 홉 및 두 번째 홉 채널 중에서, 그 릴레이 자신이 접속된 채널의 정보로 정의된다. 블록 대각화 전처리기가 연결된 기지국 전처리기 구조를 사용하면, 각 릴레이가 지역 채널 정보만을 활용하여 자신의 전처리기 구조를 결정할 수 있다. 제안 하는 기법은 SMSE 쌍대성을 사용하여 기지국 전처리기와 릴레이 전처리기를 결정하는 1단계 및 사용자 수신 필터를 결정하는 2단계의 순차적 반복을 기반으로 한다. 제안한 기법은 반드시 수렴하며, 이론적으로 이를 검증할 수 있다. 제안하는 기법이 Simple amplify-and-forward(SAF), MMSE 릴레이 및 [1]에서 제안한 방식에 비해서 SMSE 성능, 합 전송률 성능 모두 우월한 것을 확인한다.

• 한국통신학회논문지
• /
• 제34권10B호
• /
• pp.1043-1049
• /
• 2009

무선 센서 네트워크에서 싱크(sink) 노드의 브로드캐스트는 네트워크 관리 또는 질의를 통한 데이터 수집 및 시간 동기화 등 다양한 응용에 활용된다. 가장 단순한 형태의 브로드캐스트 방식인 플러딩(flooding)은 과도한 잉여 트래픽을 발생 시켜 브로드캐스트 스톰(broadcast storm) 문제를 야기하기 때문에 효율적인 브로드캐스트를 수행하지 못한다. 과도한 잉여 트래픽을 줄여 주는 브로드캐스트 기법으로 MPR (Multi-Point Relay)을 활용한 브로드캐스트 방식이 있다. MPR은 2 홉(hop)범위에 브로드캐스트 메시지를 전달하기 위해 메시지를 중계하여야 하는 1 홉 범위의 노드 집합을 의미한다. MPR을 최소로 선발할 경우 잉여 트래픽을 크게 줄일 수 있으나, 브로트캐스트 메시지의 충돌과 중복된 수신으로 인한 에너지 낭비문제는 해결하지는 못 한다. 본 논문에서는 무선 센서네트워크에서 3 개의 채널을 사용하는 MPR 기반의 싱크 브로드캐스트 기법을 제안한다. 제안하는 기법은 브로드캐스트 메시지의 충돌 가능성을 크게 줄여 신뢰성을 향상시킴과 동시에 중복된 메시지 수신을 배제함으로써 에너지 소모를 줄인다. 성능 평가 결과는 제안하는 기법이 MPR을 이용한 브로드캐스트와 비교하여 에너지 효율적이고 전송 지연이 짧으며 전송 신뢰도가 높음을 보여준다.

• Journal of Electrical Engineering and Technology
• /
• 제5권4호
• /
• pp.522-529
• /
• 2010

Distance relay plays an important role in the protection of transmission lines. The application of flexible AC transmission systems (FACTS) devices, such as the static synchronous compensator (STATCOM), could affect the performance of the distance relay because of compensation effect. This paper analyzes the application of distance relay on the protection of a transmission line containing STATCOM. New setting principles for different protection zones are proposed based on this analysis. A typical 500 kV transmission system employing STATCOM is modeled using Matlab/Simulink. The impact of STATCOM on distance protection scheme is studied for different fault types, fault locations, and system configurations. Based on simulation results, the performance of distance relay is evaluated. The setting principle can be verified for the transmission line with STATCOM.

• Journal of information and communication convergence engineering
• /
• 제9권4호
• /
• pp.405-410
• /
• 2011

In this paper, a conflict-avoided resource reservation scheme for UWB (Ultra Wide Band) WPAN (Wireless Personal Area Network) with D-MAC (Distributed Medium Access Control) is proposed. Since distributed characteristic of the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme may cause lots of conflicts, overall performances of the WiMedia D-MAC can be deteriorated. In addition, once a DRP conflict occurs, only one of the DRP reservations involved in that DRP conflict maintains the reserved MASs, while the other DRP reservation must be terminated and DRP negotiations for them have to be re-started. Such DRP termination and renegotiation time delays due to the DRP conflicts can be a critical problem to the mobile devices transceiving real-time QoS traffic streams. Therefore, we propose a mechanism to avoid DRP conflicts by providing a kind of path diversity using relay transmission scheme and demonstrate its performance improvements via simulation results.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권3호
• /
• pp.161-167
• /
• 2004

Zone 3 of the distance relay is used to provide the remote back-up protection in case of the failure of the primary protection. However, the risk lot mal-operations under stressed conditions such as heavy loading, voltage and transient instability is usually high. Zone 3 is used in combination with the derivatives of the voltage, and current, etc to prevent mal-operations. Sometimes, the impedance characteristics that restrict the tripping area of relay are used to avoid the mal-operations due to load encroachment. This paper presents a novel Zone 3 scheme based on combining the steady-state components (i.e. 60Hz) and the transient components (TCs) using a state diagram that visualizes the sequence of studies that emanate from the sequence of events. The simulation results show that the novel zone 3 distance relay elements using the proposed method operates correctly for the various events.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.245-247
• /
• 2003

Zone 3 of the distance relay is used to provide the remote back-up protection in case of the failure of the primary protection. However, the risk for mal-operations under stressed conditions such as heavy loading, voltage and transient instability is usually high. Zone 3 is used in combination with the derivatives of the voltage, and current, etc to prevent mal-operations. Sometimes, the impedance characteristics that restrict the tripping area of relay are used to avoid the mal-operations due to load encroachment. This paper presents a novel zone 3 scheme based on combining the steady-state components(i.e. 60Hz) and the transient components(TCs) using a state diagram that visualizes the sequence of studies that emanate from the sequence of events. The simulation results show that the novel zone 3 distance relay elements using the proposed method operates correctly for the various events.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권1호
• /
• pp.187-199
• /
• 2016

In this paper, we consider secure communications in multi-hop relaying systems, where multiple decode-and-forward (DF) relays are located at each individual hop and perform cooperative beamforming to improve physical layer security. In order to determine the cooperative relay beamformer at each hop, we propose an iterative beamformer update scheme using semidefinite relaxation and bisection techniques. Numerical results are presented to verify the secrecy rate performance of the proposed scheme.

• 대한전기학회논문지
• /
• 제40권7호
• /
• pp.696-705
• /
• 1991

This paper describes the procedures for pre-tuning and re-tuning the gains of PI controller based on output patterns -output error integral- of the unknown process which may not have any information, for example, system order, deadtime, time constant, etc. The key ideas of the proposed adaptive scheme are as follows. The scheme determines the initial gains by using ZNM (Ziegler-Nichols Method) with relay feedback, and then the adaptive algorithms by pattern recognition are introduced for re-runing the PI gains with on-line scheme whenever control conditions are changed. Because, among the various auto-tuning procedures, ANM with relay feedback has the difficulty in re-tuning with on-line and Bristol method has no comment on initial settings and has variables to pre-determine, which makes the algorithm comples, the proposed methods have the combined scheme with above two procedures to recover those problems. And this paper proposes a simple way to determine adaptive constant in Bristol method. To show the validity of the proposed method, an example is illustrated by computer simulation and a laboratory process, heat exchanger, is experimented.