• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.379-381
• /
• 2000

인터넷과 같은 WAN환경에서 멀티미디어 전송품질을 향상시키기 위해서 Proxy Cache가 많이 이용되고 있으며, 이에 기반하여 클라이언트에게 실시간으로 연속미디어를 서비스하기 위한 여러 가지 전송기법들이 요구되어지고 있다. 본 논문에서는 Proxy Cache안에 일정양의 메모리를 Relay Buffer로 할당하고 이를 이용한 흐름제어기법을 구현하며, RTSP서버의 전송스케쥴러의 idle time을 이용하는 재전송기법을 제안하고 구현한다. 실험 결과, 제안된 기법은 WAN상에서의 RTSP서버와 Proxy Cache사이 패킷손실량 현저하게 줄일 수 있음을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1675-1686
• /
• 2011

We propose a spectrally efficient relaying scheme with multiple antennas for cellular networks which consist of base station (BS), relay station (RSs), and mobile stations (MSs). In general, a BS has more antennas than an RS or an MS. By using multiple antennas, a BS can support another MS with the same frequency resource, where an RS transmits data to a specific MS. In this case, the MS receiving data form an RS also receives the interference form the BS because the BS also uses the same frequency resource at the same time. In this paper, we propose ing and pre-whitening techniques as a pre-coding scheme at the BS for reducing the interference at the MS receiving data from the RS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.792-803
• /
• 2005

Ultra wide band (UWB) technology will be applied in the high rare wireless personal area networks (WPANs) for its high rate, low power, and innate immunity to multipath fading. In this paper, a power aware multi-hop packet relay MAC protocol in UWB based WPANs is proposed and a power aware path status factor (PAPSF), which is derived from SINR and power resource condition of each device, is used to select a suitable relay node. Compared with relaying by piconet coordinator (PNC), which is easily chosen by other ad hoc routing protocol, the new scheme can achieve hi임or throughput, decrease the time required for transmitting high power signal and we can easily distribute the battery power consumption from PNC to other devices in the piconet to prevent the PNC device using up its battery too fast and finally avoid PNC handover too frequently.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.796-806
• /
• 2003

Mobile Node usually communicate with CN bia only it's own HA but Nested Mobile Networks correspond with CN bia all HA involved with them. when Mobile Network of a MR moves from its home link to a foreign link in the stationary network. then Mobile Network of another MR moves from its home link in stationary network to foreign link in previous mobile network. CN send Packet destined to the latter MR via both Home Agent of the former MR and the latter MR. There are two problem in this scenario. One is inefficient routing path that bypass via several HA. the other is waste of transmission resource and delay of Registration process which change of Nested Mobile Network Architecture cause Mobile Router. so We propose MRA(Mobile Relay Agent) to support effective routing by local mobility management.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.89-95
• /
• 2015

As a solution of improving the energy efficiency in power system, Low Voltage DC (LVDC) distribution systems different from conventional ones have been constantly researched. As in conventional AC distribution system, LVDC distribution system can suffer from High Impedance Fault (HIF) which may cause a failure of protective relay due to relatively low change in magnitude of fault current. In order to solve the problem, a scheme for detecting HIFs is presented in this paper. Closing Opening Difference Operation (CODO) based on Mathematical Morphology (MM), one of the MM-based filters, is utilized to make fault signals discriminable. To verify performance of the scheme, a simple LVDC distribution system is modeled by using ElectroMagnetic Transient Program (EMTP) software. Computer simulations according to various conditions are performed and comparison studies with a scheme using Wavelet Transform (WT) in an aspect of simulation time are also conducted.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.137-144
• /
• 2006

This paper proposes novel protection schemes for grid-connected distributed generation (DG) units using the fault location algorithm. The grid-connected DG would be influenced by abnormal distribution line conditions. Identification of the fault location for the distribution lines at the relaying point of DG helps solve the problems of the protection relays for DG. The proposed scheme first identifies fault locations using currents and voltages measured at DG and source impedance of distribution networks. Then the actual faulted feeder is identified, applying time-current characteristic curves (TCC) of overcurrent relay (OCR). The method considering the fault location and TCC of OCR might improve the performance of the conventional relays for DG. Test results show that the method prevents the superfluous operations of protection devices by discriminating the faulted feeder, whether it is a distribution line where DG is integrated or out of the line emanated from the substation to which the DGs are connected.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.59-64
• /
• 2014

This paper address the scheme for WiMAX backhaul in mobile communication network. These days most ISPs has implemented Wi-Fi backhaul using T1/E1 and DSL. if WiMAX is installed as the alternative to the mobile backhaul, it can decrease the costs drastically for the installation and operations. And it will be one of the best cost-effective solutions to cover the service areas which has not the wired communication infrastructure. WiMAX can be used for Base station, Subscriber Station, and Relay. In this paper, the performance is measured for downstream and upstream using NAT and port forwarding functions by configuring WiMAX server and WiMAX SS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.431-433
• /
• 2016

In this paper, we propose an algorithm that analyzes characteristic nodes to select efficient relay nodes using message distribution. Existing delay-tolerant network (DTN) routing algorithms have problems with large latency and overhead on account of the deficiency of network information in an unsteady network. We must solve this problem, predict future networks using node state information, and apply a weight factor that changes according to the message distribution. Simulation results show that the proposed algorithm provides enhanced performance compared to existing DTN routing algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1413-1421
• /
• 2011

A next generation military communication system called Tactical Information Communication Network(TICN) is designed to advance into large capacity, high speed, and long distance wireless relay transmission. To support mobility in battlefield, the application of Ad-hoc networking technology to its wireless communication is being considered. In Ad-hoc network, the key management technique is very important to ensure the confidentiality, integrity, and authentication. In this paper, we propose a new hybrid key management scheme considering the hierarchical characteristics of the tactical ad-hoc such as TICN. For upper layer with sufficient energy and computation capability, we apply PKI based key management scheme. For lower layer with restricted resources, we propose a new key management scheme using the location-based authentication to ensure the energy efficiency.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1283-1285
• /
• 2007

A wireless sensor network is the combination of a large number of deployed sensors over an area. Communication between the sensors is the most important factor for a successful sensor network. It is mandatory that long distance and multi-hop communication will occur between sensors. Generally sensors relay the sensed data of a particular territory to the command center via a base station. For the non uniformed deployment of sensors many sensors may deploy in hostile areas surrounded by full of obstacles or in other condition it may be out of the direct communication range of the base station. It seems a critical problem for routing data to and from those sensors to the base station. This paper proposes a route management scheme using a dynamic load balancing approach based on residual energy of each agent sensors.