• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.110-115
• /
• 2001

Today, effective utilization of sophisticated networks greatly influences the activities of a business, making performance evaluations of computer network systems a necessity, We have developed a special computer network simulator capable of automatically generating a model based on data accumulated by a network analyzer to guide the user in selecting ideal parameters. The simulator was developed to provide user-friendly analysis for engineers involved in the actual network design. This paper gives an overview of the simulator and describes an example application of evaluating a network design that anticipates the future increase in traffic for a company introducing voice over frame relay (VoFR) into a wide area network (WAW).

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.33-37
• /
• 2008

Recently, there have been intensive researches on the wireless Internet access through WiFi WLAN using WiRro network as backhaul link in the Internet service providing business area. However, in the wireless Internet access method, we need to solve the compatibility problem for different user authentications between licensed WiBro network and unlicensed WiFi network for billing and user management. In this paper, we propose an authentication method for WiFi users by BWAN operators through WiNNERs which is RS connecting the two networks, and discuss the effectiveness of the method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.1889-1910
• /
• 2017

This paper investigates a protocol so-called Adaptive Harvest Then Transmit (AHTT) for wireless powered communication networks (WPCNs) in multiple-input single-output (MISO) downlink systems, which assists in transmitting signals from a multi-antenna transmitter to a single-antenna receiver. Particularly, the power constrained relay is supplied with power by utilizing radio frequency (RF) signals from the source. In order to take advantage of multiple antennas, two different linear processing schemes, including Maximum Ratio Combining (MRC) and Selection Combination (SC) are studied. The system outage capacity and ergodic capacity are evaluated for performance analysis. Furthermore, the optimal power allocation is also considered. Our numerical and simulation results prove that the implementation of multiple antennas helps boost the energy harvesting capability. Therefore, this paper puts forward a new way to the energy efficiency (EE) enhancement, which contributes to better system performance.

• ETRI Journal
• /
• v.31 no.4
• /
• pp.357-364
• /
• 2009

In this paper, we propose a novel equalization on-channel repeater (OCR) with a feedback interference canceller (FIC) to relay terrestrial digital multimedia broadcasting signals in single frequency networks. The proposed OCR not only has high output power by cancelling the feedback signals caused by insufficient antenna isolation through the FIC, but also shows better output signal quality than the conventional OCR by removing multipath signals existing between the main transmitter and the OCR through an equalizer. In addition, computer simulations and laboratory test results demonstrate that the proposed OCR successfully cancels feedback signals and compensates channel distortions and provides a higher quality transmitting signal with higher output power than conventional OCRs.

• The Journal of Society for e-Business Studies
• /
• v.6 no.2
• /
• pp.25-38
• /
• 2001

ATM is the transport method for the broadband integrated services digital networks(B-ISDN). It may replace existing LAN, MAN and WAN technologies such as CSMA/CD, FDDI, Frame relay, X.25, etc. But it is more complicate than existing network technologies. One of the main difficulties in ATM network is performance management. Specifically, the problems are evaluating the performance and tuning the values of the performance parameters, The goal of this paper is to introduce a system architecture designed for ATM network performance management, The major ingredients of the system are generic performance parameters In be measured from ATM network, performance evaluation models and decision criteria concerning the network performance. In this paper, general requirements for performance management application in ATM network are discussed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.105-108
• /
• 2011

OLSR(Optimized Link State Routing) 프로토콜은 모바일 애드 혹 네트워크(Mobile Ad hoc Networks)에서 사용되는 프로액티브(proactive) 프로토콜이다. OLSR에서는 각 노드가 자신의 MPR(multi-point relay) 노드를 선정하고, MPR 노드를 통해 모든 메시지를 전달한다. 만약 공격자가 네트워크 정보를 조작 하여 자신이 다른 노드들의 MPR로 선정되도록 한다면, 공격자는 주변의 노드의 메시지를 폐기시킬 수 있다. 본 논문에서는 이러한 OLSR의 취약점을 보안하기 위한 SE-OLSR(Secure Enhanced OLSR) 프로토콜을 제안한다.

• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.445-454
• /
• 2009

Cooperative transmission protocols are always designed to achieve the largest diversity gain and the network capacity simultaneously. The concept of diversity-multiplexing tradeoff (DMT) in multiple input multiple output (MIMO) systems has been extended to this field. However, DMT constrains a better understanding of the asymptotic interplay between transmission rate, outage probability (OP) and signal-to-noise ratio. Another formulation called the throughput-reliability tradeoff (TRT) was then proposed to avoid such a limitation. By this new rule, Azarian and Gamal well elucidated the asymptotic trends exhibited by the OP curves in block-fading MIMO channels. Meanwhile they doubted whether the new rule can be used in more general channels and protocols. In this paper, we will prove that it does hold true in decode-and-forward cooperative protocols. We deduce the theoretic OP curves predicted by TRT and demonstrate by simulations that the OP curves will asymptotically overlap with the theoretic curves predicted by TRT.

• Journal of Communications and Networks
• /
• v.16 no.2
• /
• pp.110-120
• /
• 2014

This article proposes a spectrum sharing method which can avoid the mutual interference in both primary and secondary systems. The two systems make them a priority to use two single-dimension orthogonal signals, the real and imaginary pulse amplitude modulation signals, if the primary system is not in outage with this use. A secondary transmitter is selected to be the primary relay and the active secondary source to perform this. This allows a simultaneous spectrum access without any mutual interference. Otherwise, the primary system attempts to use a full two-dimensional signal, the quadrature amplitude modulation signal. If there is no outage with respect to this use, the secondary spectrum access is not allowed. When both of the previous attempts fail, the secondary system is allowed to freely use the spectrum two whole time slots. The analysis and simulation are provided to analyze the outage performance and they validate the considerable improvement of the proposed method as compared to the conventional one.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.116-124
• /
• 2011

For Binary CDMA network, communication can be accomplished only within a Pico-net on the boundary of management by the master station because it manages network resources of each entity. In this research, we try to overcome these limits and extend the application for Binary CDMA system to broad-band network. We suggest a new Binary CDMA router such that network is devised by cell unit and multiple Pico-net and a unique address is assigned to each Pico-cell to relaying data between Pico-cells.

• Journal of Industrial Technology
• /
• v.32 no.A
• /
• pp.3-8
• /
• 2012

In IEEE 802.16j standard document, two modes about usage of RS are proposed; one is transparent mode to enhance data throughput and the other is non-transparent mode to extend coverage. In this paper, we focus on non-transparent mode and find that the mode also affects data throughput. We analyze data throughput on various RS topology and their extended coverage area in non-transparent mode. From the analysis, we see that higher throughput can be obtained when MR-BS and RS are located distantly.