• Journal of Distribution Science
• /
• v.16 no.9
• /
• pp.65-77
• /
• 2018

Purpose - A trading area is very closely related to consumer life. A trading area is a cultural and social space that consumes culture and promotes human relationships as well as an economic space where consumers live their daily lives. In this context, a trading area research should be conducted objectively and empirically because it deals with the activities of consumer's life. The purpose of this study is to identify the intrinsic psychological motivation(push motivation) caused when consumers visit a trading area and to demonstrate how the push motivation for a trading area influence on consumer's flow, satisfaction, revisit intention. Research design, data, and methodology - In order to develop research hypotheses for this study, the development procedures for push motivation scale are as follows; (1) generating initial pool of items based on previous studies, (2) expert judgement to evaluate content and face validity, and (3) assessing convergent and discriminant validity using confirmatory factor analysis. In order to achieve these purposes, online surveys were conducted on frequent or familiar visitors to the trading areas around the Gangnam, Kunkuk University and Hongik University Station. Among the 1,343 questionnaires collected, 1,157 cases were analyzed by using SPSS 22.0 and SmartPLS 3.0 statistical package program, except for 186 responses in which responses were judged to be unfaithful. Results - The push motivation was classified into five sub-dimensions of excitement/stimulus, rest/relaxation, exit/refreshing, knowledge/learning and human relationship promotion as multidimensional and complex factors composed of individual and social-related dimensions. The excitement/stimulus and human relationship promotion of push motivation have positive effects on satisfaction. However, all dimensions of the push motivation have positive effects on flow. And flow has a positive effect on satisfaction and revisit intention. Meanwhile, the mediation test using boostrapping shows that flow plays a full mediating role in the relationship between rest/relaxation, exit/refreshing, knowledge/learning and satisfaction, but a partial mediating rol e between excitement/stimulus, human relationship promotion and satisfaction. Finally, satisfaction plays a partial mediating role between flow and revisit intention. Conclusions - This study shows that the push motivation is multidimensional and compositive depending on the situation of a consumer. In addition, it is found that the human relationship promotion(a social-related motivation) has a much more important effect on flow and satisfaction than other push motivations of individual dimensions. It also shows that satisfaction increases when consumers are being flowed at their visit and degree of revisit intention also grows as satisfaction increases. As implications of this study, a marketer should try to understand consumer's visit motivation at first and then develop factors that increase their flow, satisfaction, revisit intention. It also requires a marketer to approach subjects on a trading area more objectively and empirically based on the psychology and behavior of consumers, in order to establish a proper and efficient strategy on development of a trading area.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.6
• /
• pp.514-528
• /
• 2004

An emotion-based video scene retrieval algorithm is proposed in this paper. First, abrupt/gradual shot boundaries are detected in the video clip representing a specific story Then, five video features such as 'average color histogram' 'average brightness', 'average edge histogram', 'average shot duration', and 'gradual change rate' are extracted from each of the videos and mapping between these features and the emotional space that user has in mind is achieved by an interactive genetic algorithm. Once the proposed algorithm has selected videos that contain the corresponding emotion from initial population of videos, feature vectors from the selected videos are regarded as chromosomes and a genetic crossover is applied over them. Next, new chromosomes after crossover and feature vectors in the database videos are compared based on the similarity function to obtain the most similar videos as solutions of the next generation. By iterating above procedures, new population of videos that user has in mind are retrieved. In order to show the validity of the proposed method, six example categories such as 'action', 'excitement', 'suspense', 'quietness', 'relaxation', 'happiness' are used as emotions for experiments. Over 300 commercial videos, retrieval results show 70% effectiveness in average.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.587-592
• /
• 2007

Purpose: In case of postburn flexion contracture of the fingers, skin graft, geometrical relaxation techniques, local flap, and free flap have been used. Among these procedures, full-thickness skin grafts from the inguinal area are widely used to reconstruct a postburn flexion contracture in the fingers. But there are many esthetic and functional problems in this procedure. Especially, hyperpigmentation of the skin-grafted fingers poses a troublesome problem, particularly in the patients who have dark colored skin. To solve the problem, we have used pulp graft which was harvested from the lateral aspect of great toe. In the present study, we report pulp graft, with which we have obtained a good result in the treatment of postburn flexion contracture of the fingers. Methods: Between September of 2004 and August of 2006, great toe pulp graft was performed to 20 sites of 15 patients. After release of the postburn flexion contracture using Z-plasty, the composite tissue (pulp) harvested from the lateral aspect of great toe was grafted on the raw surface. Moisture dressing with ointment and foam dressing material was performed. Stratum corneum of the graft got stripped off in two to four weeks after pulp graft. The color of the pulp graft was slightly reddish, then it became similar to the adjacent tissue. Results: There was complete take in all the patients who were treated with pulp graft. Great toe pulp graft provided similar color and texture to the adjacent skin, high rate of graft take, and left only a minimal scar at donor site. Conclusion: Thick keratin layer and inelastic nature of the pulp make this type of the graft much easier and simpler, and ensure a better take. Pulp graft is useful method for the reconstruction of the postburn flexion contracture in fingers.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.233-241
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces strictly related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.211-219
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces stric시y related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials. In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.5
• /
• pp.43-51
• /
• 2019

At present, the ground anchor method is commonly applied to securing the slope stability in Korea. The ground anchor is reported to decrease in tensile load due to aging and environmental influences with time such as corrosion, relaxation, creep and so on. In Korea, the lift-off test is performed for the periodic inspection or cases when the symptoms of deterioration on anchors and the residual tensile load of the anchors is checked. However, the current lift-off test standard (MOLIT, 2010) is not fully specified in details. In this study, the factors affecting the lift-off test were investigated based on the previous research and foreign standards and lift-off tests were performed with consideration for the loading and unloading cycle, load increment method, and tensioning tendon method. Based on the results, this paper proposes improved testing and evaluation procedures of the lift-off test considering the workability and time limits in the field.

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.171-179
• /
• 2021

We outline a process for estimating Cole-Cole parameters from time-domain induced polarization (IP) data. The IP transients are all inverted to 2D Cole-Cole earth models that include resistivity, chargeability, relaxation time, and the frequency exponent. Our inversion algorithm consists of two stages. We first convert the measured voltage decay curves into time series of current-on time apparent resistivity to circumvent the negative chargeability problem. As a first step, a 4D inversion recovers the resistivity model at each time channel that increases monotonically with time. The desired intrinsic Cole-Cole parameters are then recovered by inverting the resistivity time series of each inversion block. In the second step, the Cole-Cole parameters can be estimated readily by setting the initial model close to the true value through a grid search method. Finally, through inversion procedures applied to synthetic data sets, we demonstrate that our algorithm can image the Cole-Cole earth models effectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.211-219
• /
• 2020

The purpose of this study is to conduct body shape management on women for a certain period of time to determine the structural relationship between the latent variables of life habits, social support, and life satisfaction and the impact on the quality of life. Body shape management was performed with chiropractic adjustments and myofascial relaxation therapy, and a physical therapist with 25 years of experience was used as an expert. The subject of the study was a sample of women in their 20s to 60s residing in Gwangju Metropolitan City, and women who participated in body shape management procedures more than 20 times for the study were asked to fill out a questionnaire using a self-evaluation writing method. The final analysis target was 100 people who made it reasonable to analyze the data. As a result of the study, it was found that the quality of life of women related to health can vary depending on the presence and degree of body shape management. In addition, the degree of life satisfaction varies according to the level of lifestyle and social support, and the direct, indirect, and total effects of the latent variables related to the quality of life were all significant. In this study, the usual body shape management that can improve the quality of life of women gives meaning to the opportunity for women to have desirable lifestyle and to give them a recognition that values quality of life.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.6
• /
• pp.497-503
• /
• 2004

One of the most difficult problems to damage in dentistry is an odontogenic infection. These infections may range from low-grade, well-localized infections that require only minimal treatment to a severe, life-threatenig fascial space infection. Although the overwhelming majority of odontogenic infections are easily managed by minor surgical procedures and supportive medical therapy that includes antibiotic administration, the practitioner must constantly bear in mind that these infections may become severe in a very short time. We made an investigation was targeting on 78 male and 47 female patients (125 patients in total) who had been hospitalized because of the fascial space abscess on the oral and maxillofacial area and gained a complete recovery in Daegu Catholic University Hospital, Oral & Maxillofacial Surgery from January 1999 to December 2003. By tracing their charts, we could grasp the characteristics such as age, gender, the time of breakout and specific areas of the attacks, making a conclusive study of the statistical analysis and finally, we could reach conclusions. Now, we report the conclusion from the investigation with the literature. The proportion of males and females was approximately 3 to 2, and in age group, patients under 10 years old marked the highest, 22.4%. The patients between the age of 10 and 40 were only 14.4%, yet those who were between 40 and 80 marked 53.6% in contrast. In the monthly distribution, the order was Dec.(13.6%)-Sep.(12%)-Jan.(10.4%) and in seasonal distribution, it was winter(30.4%)-fall(28%)- summer(24.4%)- spring(19.2%). Considering the medical history, D.M. was the highest which was 30.3%, hypertension marked 24.4%, and the patients with both D.M. and hypertension were 9.0%. The major cause of infection of oral and maxillofacial areas was odontogenic infection, which marked about 96%, and especially the cases related to dental caries occurred most frequently, which was 51.2%. In the number of relaxed fascial space, single fascial space was 81.6%, and in the degree of relaxation of fascial space, the buccal space abscess marked 40.8%, following submandibular space abscess, which was 30.4%.