• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.134-141
• /
• 1997

A geometrically non-linear finite element formulation of spatial cable networks is presented using three cable elements. Firstly, derivation procedures of tangent stiffness and mass matrices for the space truss element and the elastic catenary cable element, and the isoparametric cable element are summarized. The load incremental method based on Newton-Raphson iteration method and the dynamic relaxation method are presented in order to determine the initial static state of cable nets subjected to self-weights and support motions. Furthermore, static non-linear analysis of cable structures under additional live loads are performed based on the initial configuration. Challenging example problems are presented and discussed in order to demonstrate the feasibility of the present finite element method and investigate static non-linear behaviors of cable nets.

• Coupled systems mechanics
• /
• 제1권1호
• /
• pp.19-37
• /
• 2012

In this work, the iterative coupling of finite element and boundary element methods for the investigation of coupled fluid-fluid, solid-solid and fluid-solid wave propagation models is reviewed. In order to perform the coupling of the two numerical methods, a successive renewal of the variables on the common interface between the two sub-domains is performed through an iterative procedure until convergence is achieved. In the case of local nonlinearities within the finite element sub-domain, it is straightforward to perform the iterative coupling together with the iterations needed to solve the nonlinear system. In particular, a more efficient and stable performance of the coupling procedure is achieved by a special formulation that allows to use different time steps in each sub-domain. Optimized relaxation parameters are also considered in the analyses, in order to speed up and/or to ensure the convergence of the iterative process.

• Journal of information and communication convergence engineering
• /
• 제10권3호
• /
• pp.242-247
• /
• 2012

In the determination of suitable frame sizes associated with dynamic framed slotted Aloha used in radio frequency identification tag identification processes, the widely imposed constraint $L=2^Q$ often yields inappropriate values deviating far from the optimal values, while a straightforward use of the estimated optimal frame sizes causes frequent restarts of read procedures, both resulting in long identification delays. Taking a trade-off, in this paper, we propose a new method for determining effective frame sizes where the effective frame size changes in a multiple of a predetermined step size, namely ${\Delta}$. Through computer simulations, we show that the proposed scheme works fairly well in terms of identification delay.

• Journal of Korean Institute of Industrial Engineers
• /
• 제40권4호
• /
• pp.396-403
• /
• 2014

The multi-divisional knapsack problem is defined as a binary knapsack problem where each mutually exclusive division has its own capacity. In this paper, we present an extension of the multi-divisional knapsack problem that has generalized multiple-choice constraints. We explore the linear programming relaxation (P) of this extended problem and identify some properties of problem (P). Then, we develop a transformation which converts the problem (P) into an LP knapsack problem and derive the optimal solutions of problem (P) from those of the converted LP knapsack problem. The solution procedures have a worst case computational complexity of order $O(n^2{\log}\;n)$, where n is the total number of variables. We illustrate a numerical example and discuss some variations of problem (P).

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1641-1647
• /
• 2006

Vibrational relaxation and competitive C-$H_{methyl}$ and C-$H_{ring}$ bond dissociations in vibrationally excited methylpyrazine in the collision with HF have been studied by use of classical trajectory procedures. The energy lost by the vibrationally excited methylpyrazine upon collision is not large and it increases slowly with increasing total vibrational energy content between 20,000 and 45,000 $cm^{-1}$. Above the energy content of 45,000 $cm^{-1}$, however, energy loss decreases. The temperature dependence of energy loss is negligible between 200 and 400 K, but above 45,000 $cm^{-1}$ the energy loss increases as the temperature is raised. Energy transfer to or from the excited methyl C-H bond occurs in strong collisions with HF, that is, relatively large amount of translational energy is transferred in a single step. On the other hand, energy transfer to the ring C-H bond occurs in a series of small steps. When the total energy content ET of methylpyrazine is sufficiently high, either or both C-H bonds can dissociate. The C-$H_{methyl}$ dissociation probability is higher than the C-$H_{ring}$ dissociation probability. The dissociation of the ring C-H bond is not the result of the direct intermolecular energy flow from the direct collision between the ring C-H and HF but the result of the intramolecular flow of energy from the methyl group to the ring C-H stretch.

• Journal of Naturopathy
• /
• 제10권2호
• /
• pp.71-76
• /
• 2021

Background: The understanding of back-pain as one of the commonest clinical presentations, made the path to the present study. More than three-quarters of the world's population experience back-pain at some time in their lives Purpose: The present study has evaluated the selected Naturopathic therapeutic procedures on individuals with low back-pain. Methods: Thirteen patients were selected for the study and randomly divided into two groups, viz., Group A, Naturopathic group and Group B, Control group. One patient discontinued. Naturopathic group was treated with mud pack, aromatherapy massage with Eucalyptus oil, acupressure, steam, wet trunk pack, exercises, relaxation and breathing exercises. Advice for life style and diet was given for patients of both the groups. The effect of the therapy was assessed subjectively and objectively. Particular scores drawn for Naturopathic group and control group were individually analyzed before and after treatment and the values were compared using standard statistical protocols. Results: Naturopathic intervention revealed 100% relief in both subjective and objective parameters (i.e., 6 out of 14 parameters showed statistically highly significant P < 0.01 results, while 8 showed significant results P < 0.05). Conclusion: Statistically highly significant results of this study point out the successful management of the multi factorial low back-pain with a multi focused Naturopathic treatment approach. Such encouraging results may pave the way for a future study on a large sample in a longer duration incorporating clinical investigations.

• Journal of Oral Medicine and Pain
• /
• 제14권1호
• /
• pp.113-121
• /
• 1989

In this study, 94 patients with temporomandibular disorders were interviewed to evaluate the effect of the treatment they received at the department of Oral diagnosis and oral Medicine in Seoul national university Hospital. The treatment administered to the patient were patient education, relaxation procedures, physical therapy, occlusal splint therapy and selective grinding of teeth. The following results were disclosed : 1. 97.9% of the patients reported no pain or considerably less pain than they had reported at their first visits to the department. 2. 89.3% of the patients thought that the treatment provided was either complete or considerably successful. 3. TMJ and facial pain was resolved within average 3.0 months 4. Of the 70 patients who previously reported having jaw joint sound, 34 patients (48.6%) no longer reported int. 5. Of the 48 patients who previously reported having headache regularly, 3 patients (68.8%) no longer reported headache regularly. 6. Of the 66 patients who previously reported having masticatory muscle pain, 41 patients (62.1%) no longer reported masticatory muscle pain. 7. Analysis of the data did not disclose a subgroup or factor, such as age, the stage of internal derangement, capsulitis, bruxism, MPD, duration of symptoms, that could be correlated with the reduction of pain or the patient's perception of success of treatment.

• Nuclear Engineering and Technology
• /
• 제32권6호
• /
• pp.566-594
• /
• 2000

In most LMFBR(Liquid Metal Fast Breed Reactor) design, the operating temperature is very high and the time-dependent creep and stress-rupture effects become so important in reactor structural design. Therefore, unlike with conventional PWR, the normal operating conditions can be basically dominant design loading because the hold time at elevated temperature condition is so long and enough to result in severe total creep ratcheting strains during total service lifetime. In this paper, elevated temperature design of the conceptually designed baffle annulus regions of KALIMER(Korea Advanced Liquid MEtal Reactor) reactor internal strictures is carried out for normal operating conditions which have the operating temperature 53$0^{\circ}C$ and the total service lifetime of 30 years. For the elevated temperature design of reactor internal structures, the ASME Code Case N-201-4 is used. Using this code, the time-dependent stress limits, the accumulated total inelastic strain during service lifetime, and the creep-fatigue damages are evaluated with the calculation results by the elastic analysis under conservative assumptions. The application procedures of elevated temperature design of the reactor internal structures using ASME Code Case N-201-4 with the elastic analysis method are described step by step in detail. This paper will be useful guide for actual application of elevated temperature design of various reactor types accounting for creep and stress-rupture effects.

• Structural Engineering and Mechanics
• /
• 제35권3호
• /
• pp.283-299
• /
• 2010

This paper addresses the numerical simulation of fatigue crack growth in arbitrary 2D geometries under constant amplitude loading by the using a new finite element software. The purpose of this software is on the determination of 2D crack paths and surfaces as well as on the evaluation of components Lifetimes as a part of the damage tolerant assessment. Throughout the simulation of fatigue crack propagation an automatic adaptive mesh is carried out in the vicinity of the crack front nodes and in the elements which represent the higher stresses distribution. The fatigue crack direction and the corresponding stress-intensity factors are estimated at each small crack increment by employing the displacement extrapolation technique under facilitation of singular crack tip elements. The propagation is modeled by successive linear extensions, which are determined by the stress intensity factors under linear elastic fracture mechanics (LEFM) assumption. The stress intensity factors range history must be recorded along the small crack increments. Upon completion of the stress intensity factors range history recording, fatigue crack propagation life of the examined specimen is predicted. A consistent transfer algorithm and a crack relaxation method are proposed and implemented for this purpose. Verification of the predicted fatigue life is validated with relevant experimental data and numerical results obtained by other researchers. The comparisons show that the program is capable of demonstrating the fatigue life prediction results as well as the fatigue crack path satisfactorily.

• Journal of dental hygiene science
• /
• 제17권1호
• /
• pp.46-55
• /
• 2017

Many people in Korea suffer from a fear of dental treatments; however, only a few studies have focused on this population. This study assessed the effectiveness of cognitive behavioral therapy (CBT) and its interventions in reducing dental anxiety, especially when administered by trained dental staff. Using case studies, the authors analyzed the content of each session and examined the process of reducing dental anxiety. First, the authors observed that the results of both dental fear scale and subjective unit of disturbance decreased significantly with changes in cognitive distortions related to dental anxiety and that rapid improvements were noted after two therapy sessions. Second, the study reported that practicing relaxation (deep-breathing) and muscle relaxation techniques; using hand signals to indicate anxiety or discomfort; establishing an empathic relationship with the therapist; making an anxiety list; and graded insensitive and exposure along with rehearsal, were effective in coping with dental anxiety and in changing negative thoughts towards the dentist. Third, a simple cognitive behavioral intervention can be effective in reducing dental anxiety. In summary, a short-term, five-session psychological intervention with CBT produced a sustained decrease in the symptoms of dental anxiety, allowing the patients to receive the required procedures. The authors discussed the study limitations and the implication of their results on future research.