• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.293-300
• /
• 2020

With constant relaxation of regulations by the government in the 4th industrial innovation era, it has brought huge changes to the education environment as it has created solutions to hindrance factors against introduction of the cloud. Universities are getting more interested in the introduction of the cloud Computing but they still remain at the level of recognition diffusion and creating ambience. The study has analyzed empirical factors of the effect of introduction of the successful case "K Cyber University's Construction of Cloud-Based Remote Education System" through the previous studies on trait factors affecting the introduction of the cloud computing and the analysis of factors in terms of expandability, agility, compatibility, economic feasibility, security, stability and institutional support. Factors drawn through this are meaningful for empirical studies on presenting strategies and the directivity to introduce the cloud computing successfully. This study can be used as the background for further studies which will require various factors prior to introducing the cloud computing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1317-1323
• /
• 2002

This paper describes the comparison of calculated effective stress with experimental one in austenitic heat resistant steels, STS310J1TB and STS310S with and without a small amount of Nb and N. Based on a solute atoms diffusion model, contribution from soluble nitrogen to the high-temperature strength was numerically examined for austenitic heat-resisting Fe-Cr-Ni-N(STS310J1TB) and Fe-Cr-Ni (STS310S) alloys. The solute atmosphere dragging stress of dislocation was calculated in optional dislocation velocity of STS310J1TB and STS310S at $650^{\circ}C$, $675^{\circ}C$ and $700^{\circ}C$. As a result of the numerical calculation, the solute atmosphere dragging stress of STS310J1TB was about 50 times larger than that of STS310S. When the temperature became high, the maximum value of solute atmosphere dragging stress was small and the velocity of moving dislocation was fast. From the relationship between the dislocation rate and the solute atmosphere dragging stress, the relation of both was proportional and the inclination is about 1 in the level with low velocity of moving dislocation. From above results, the mechanism of dislocation movement in STS310J1TB was the solute atmosphere dragging stress. The solute atmosphere dragging stress, which was calculated from the numerical calculation was close to the effect stress in stress relaxation tests.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.21-40
• /
• 2018

In this paper, we propose the distributed robust beamforming design scheme in cognitive two-way amplify-and-forward (AF) relay networks with imperfect channel state information (CSI). Assuming the CSI errors follow a complex Gaussian distribution, the objective of this paper is to design the robust beamformer which minimizes the total transmit power of the collaborative relays. This design will guarantee the outage probability of signal-to-interference-plus-noise ratio (SINR) beyond a target level at each secondary user (SU), and satisfies the outage probability of interference generated on the primary user (PU) above the predetermined maximum tolerable interference power. Due to the multiple CSI uncertainties in the two-way transmission, the probabilistic constrained optimization problem is intractable and difficult to obtain a closed-form solution. To deal with this, we reformulate the problem to the standard form through a series of matrix transformations. We then accomplish the problem by using the probabilistic approach based on two sorts of Bernstein-type inequalities and the worst-case approach based on S-Procedure. The simulation results indicate that the robust beamforming designs based on the probabilistic method and the worst-case method are both robust to the CSI errors. Meanwhile, the probabilistic method can provide higher feasibility rate and consumes less power.

• Journal of Families and Better Life
• /
• v.25 no.4
• /
• pp.31-41
• /
• 2007

This study aimed to develop a cognitive-behavioral group counseling program for depression and aggressiveness in adolescents with delinquent propensity and to examine its efficacy through pre- and post-tests. The program included cognitive restructuring, exposure training, social skills training and relaxation training. Juvenile Delinquency Scale, BDI, K-YSR, and BDHI were administered to 520 3rd grade middle-school female students to assess their levels of delinquency, depression and aggressiveness. Initially 41 students who met all the following criteria were selected: 1) top 15% scores on Juvenile Delinquency Scale, 2) top 30% scores on BDI, K-YSR and BDHI respectively. Individuals currently receiving clinical treatment were excluded. Finally 39 students were selected and randomly assigned to either a treatment group(n=20) or a control group(n=19). Then the students in the treatment group were divided into 4 subgroups. The program consisted of 12 weekly sessions, approximately $1.5{\sim}2$ hours in duration. Pre- and post-tests administered to both groups included Juvenile Delinquency Scale, BDI, K-YSR, BDHI, and CLAB. Additionally, MESSY for teachers was added at pre- and post-tests. The collected data were statistically analyzed through independent t-test and paired t-test. The results of the study were as follows: 1) The students in the treatment group showed a significant reduction in the level of depression and aggressiveness in comparison with those in the control group. 2) Teachers reported a significant reduction in internalizing/externalizing behaviors of the students in the treatment group.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.2004-2006
• /
• 1996

A thermally driven polysilicon micro actuator has been fabricated using surface micromachining techniques. It consists of P-doped polysilicon as a structural layer and TEOS (tetracthylorthosilicate) as a sacrificial layer. The polysilicon was annealed for the relaxation of residual stress which is the main cause to its deformation such as bending and buckling. And the newly developed HF VPE (vapor phase etching) process was also used as an effective release method for the elimination of sacrificial TEOS layer. The thickneas of polysilicon is $2{\mu}m$ and the lengths of active and passive polysilicon cantilevers are $500{\mu}m$ and $260{\mu}m$, respectively. The actuation is incurred by die thermal expansion due to the current flow in the active polysilicon cantilever, which motion is amplified by lever mechanism. The moving distance of polysilicon micro actuator was experimentally conformed as large as $21{\mu}m$ at the input voltage level of 10V and 50Hz square wave. The actuating characteristics are investigated by simulating the phenomena of heat transfer and thermal expansion in the polysilicon layer. The displacement of actuator is analyzed to be proportional to the square of input voltage. These micro actuator technology can be utilized for the fabrication of MEMS (microelectromechanical system) such as micro relay, which requires large displacement or contact force but relatively slow response.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.5
• /
• pp.686-690
• /
• 2015

The adrenergic receptor beta 2 (ADRB2) plays a role in various physiological responses of the muscle to exercise, such as contraction and relaxation. Given its important role in muscle function, we investigated the structure of the horse ADRB2 gene and its expression pattern after exercise to determine if it can serve as a putative biomarker for recovery. Evolutionary analyses using synonymous and non-synonymous mutation ratios, were compared with other species (human, chimpanzee, mouse, rat, cow, pig, chicken, dog, and cat), and revealed the occurrence of positive selection in the horse ADRB2 gene. In addition, expression analyses by quantitative polymerase chain reaction exhibited ubiquitous distribution of horse ADRB2 in various tissues including lung, skeletal muscle, kidney, thyroid, appendix, colon, spinal cord and heart, with the highest expression observed in the lung. The expression of ADRB2 in skeletal muscle was significantly up-regulated about four folds 30 minutes post-exercise compared to pre-exercise. The expression level of ADRB2 in leukocytes, which could be collected with convenience compared with other tissues in horse, increased until 60 min after exercise but decreased afterward until 120 min, suggesting the ADRB2 expression levels in leukocytes could be a useful biomarker to check the early recovery status of horse after exercise. In conclusion, we identified horse ADRB2 gene and analyzed expression profiles in various tissues. Additionally, analysis of ADBR2 gene expression in leukocytes could be a useful biomarker useful for evaluation of early recovery status after exercise in racing horses.

• Journal of Korean Academy of Nursing
• /
• v.46 no.2
• /
• pp.260-270
• /
• 2016

Purpose: This study was conducted to develop a program to help emergency nurses overcome compassion fatigue, and to analyze the effects of the program. Methods: A nonequivalent control group pretest-posttest design was used. There were 14 participants in the experimental group and 18 subjects in the control group. The program was comprised of five, weekly 80-minute sessions including understanding and assessment of compassion fatigue, enhancing positive affect, balancing work-life, planning self care, training in relaxation techniques and cognitive restructuring, and getting social support. Research variables were ego-resiliency, compassion satisfaction and compassion fatigue of the ProQOL 5, and salivary cortisol. Data were analyzed using Chi-square test, independent t-test, and paired t-test. Results: The first hypothesis, "There will be a difference in scores for ego resiliency between the experimental group and the control group". was not supported. The second hypothesis, "There will be a difference in scores for compassion satisfaction between the experimental group and the control group" was supported (t=2.15, p=.046). The third hypothesis, "There will be a difference in scores for compassion fatigue between the experimental group and the control group" was not supported. Conclusion: The first program for emergency nurses to overcome compassion fatigue in Korea was effective in increasing emergency nurses' compassion satisfaction and decreasing salivary cortisol level in the experimental group. Therefore, this program for overcoming compassion fatigue is useful to increase emergency nurses' compassion satisfaction. However replication studies of short-term intensive program reflecting emergency nurses' opinion are needed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.130-136
• /
• 2018

In this paper, the effects of different 3D printing parameters including laminated angle and annealing temperature, were observed for their effects on tensile testing. In 3D printing, a filament is heated quickly, extruded, and then cooled rapidly. Because plastic is a poor heat conductor, it heats and cools unevenly causing the rapid heating and cooling to create internal stress within the printed part. Therefore, internal stress can be removed using annealing and to increase tensile strength and strain. During air cooling at annealing temperature $140^{\circ}C$, the strain of laminated angle $45^{\circ}$ specimens tended to increase by 46% while the tensile stress tended to increase by 7.4%. During oven cooling at annealing temperature $140^{\circ}C$, the strain of laminated angle $45^{\circ}$ specimens tended to increase by 34% while the tensile stress tended to increase by 22.2%. In this study, we found "3D printing with annealing" eliminates internal stress and increases the strength and stiffness of a printed piece. On the microstructural level, annealing reforms the crystalline structures to even out the areas of high and low stress, which created fewer weak areas. These results are very useful for making 3D printed products with a mechanical strength that is suitable for applications.

• The Korean Journal of Physiology
• /
• v.26 no.1
• /
• pp.45-54
• /
• 1992

Effects of pH, $PCO_2$, and adenosine on the vascular contractility were investigated in the pig coronary arteries. The helical strips of isolated coronary arteries were immersed in the HEPES or $HCO_3^-/CO_2$-buffered Tyrode's solution equilibrated with 100% $O_2\;or\;95%\;O_2-5%\;CO_2\;at\;35^{\circ}C$. The contraction was recorded isometrically using a force transducer. The amplitudes of contraction induced by ACh, high $K^+$, and electrical Held stimulation (EFS) were decreased by elevating extracellular pH (pHo) and were increased by lowering pHo. A shift from $0%\;CO_2\;to\;5%\;CO_2$ at constant pHo (pH 7.4) reduced the contractions induced by ACh, high $K^+$, EFS. However the contraction induced by 100mM $K^+$ was less influenced by the change of pHo or $CO_2$. The contraction induced by ACh in $Ca^{2+}$free Tyrode's solution as well as the contraction developed by the addition of extracellular of $Ca^{2+}$ were decreased by lowering pHo and were increased by elevating pHo. High $K^+$ (25mM) induced contraction at pH 6.8 was not returned to the level of the contraction at pH 7.4 by the elevation of extracellular. calcium $[Ca^{2+}]_o$. Adenosine-induced relaxation was more significant with 5% $CO_2$ than 0% $CO_2$ in the high $K^+$-induced contraction and was more significant with low pHo than high pHo in the contraction induced by EFS. From the above results, it is suggested that $H^+$ and $CO_2$ inhibit $Ca^{2+}$ influx as well as $Ca^{2+}$ release from intracellular $Ca^{2+}$ storage sites and enhance the relaxing effect of adenosine in the pig coronary artery.

• Journal of Digital Convergence
• /
• v.18 no.2
• /
• pp.269-276
• /
• 2020

In this study, we will analyze the classroom space of elementary schools that have implemented the Seoul Metropolitan Government's 'Dream Classroom' project and identify satisfaction and needs in terms of users. Primary school was selected and the composition and color of space was investigated by the present ministerial inspection. The survey was conducted on homeroom teachers and analyzed as SPSS/WIN Statistical Programme 22.0. The satisfaction level of space elements was verified by the technical statistical analysis, the general classroom and the 'classroom with dreams' difference in response t-test, the need for planning elements (criticality), and the difference in satisfaction with one way ANOVA. The space had the most separate, primary-colored classrooms. They preferred emotional factors and bright and light atmosphere for the lower grades, and the soft and soft atmosphere for the middle and high school students. The school preferred communication space with the community, proper play and relaxation space for the complex type of classroom. This will help set the direction for elementary school classroom space planning during the Fourth Industrial Revolution.