• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권2호
• /
• pp.202-207
• /
• 2015

A CMOS relaxation oscillator, with high robustness over process, voltage and temperature (PVT) variations, is designed in $0.18{\mu}m$ CMOS. The proposed oscillator, consisting of full-differential charge-discharge timing circuit and switched-capacitor based voltage-to-current conversion, could be expanded to a simple open-loop frequency synthesizer (FS) with output frequency digitally tuned. Experimental results show that the proposed oscillator conducts subcarrier generation for frequency-modulated ultra-wideband (FM-UWB) transmitters with triangular amplitude distortion less than 1%, and achieves frequency deviation less than 8% under PVT and phase noise of -112 dBc/Hz at 1 MHz offset frequency. Under oscillation frequency of 10.5 MHz, the presented design has the relative FS error less than 2% for subcarrier generation and the power dissipation of 0.6 mW from a 1.8 V supply.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.118-122
• /
• 1992

In this paper, the properties of Thermally Stimulated Current was studied to understand carrier's behavior of $PVF_2$ film, to be regarded as the excellent piezo and pyroelectricity. The complex relaxation curve of Thermally Stimulated Current was divided into single relaxation style using Thermal Cleaning method. As a result of Applying the numerical method of asymtotic estimation to the divided single relaxation peak, we could calculated the physical factors related to charged particles of the specimen, more accurately.

• Kyungpook Mathematical Journal
• /
• 제62권4호
• /
• pp.699-713
• /
• 2022

This paper proposes a hybrid successive over-relaxation iterative method for the numerical solution of a nonlinear diffusion in a one-dimensional porous medium. The considered mathematical model is discretized using a computational complexity reduction scheme called half-sweep finite differences. The local truncation error and the analysis of the stability of the scheme are discussed. The proposed iterative method, which uses explicit group technique and modified successive over-relaxation, is formulated systematically. This method improves the efficiency of obtaining the solution in terms of total iterations and program elapsed time. The accuracy of the proposed method, which is measured using the magnitude of absolute errors, is promising. Numerical convergence tests of the proposed method are also provided. Some numerical experiments are delivered using initial-boundary value problems to show the superiority of the proposed method against some existing numerical methods.

• 한국통신학회논문지
• /
• 제33권11C호
• /
• pp.932-939
• /
• 2008

공간 다중화 방식의 MIMO(Multiple-Input Multiple-Output) 시스템에서 MLD(Maximum-Likelihood Detector)는 최적의 성능을 보이지만, 그 복잡성이 상당히 큰 단점이 있다. 이를 보완하기 위해 여러 가지 기법들이 제안되었으며, Lattice-reduction(LR) 검출기 또한 MIMO 시스템의 성능을 개선하기 위해 제안되었다. 본 논문에서는 확장된 잡음분산 행렬을 이용해 rounding operation 과정에서 발생하는 양자화 오류를 이용해 송신 신호 벡터에 근접한 candidate symbol set을 찾고, 여기서 Semidefinite Relaxation을 이용해 최대 우도 symbol을 검출한다. 그러나 그 복잡도는 MLD의 복잡도 보다 현저히 작고, LR 검출기의 복잡도에 근접한다.

• Korean Journal of Mathematics
• /
• 제13권1호
• /
• pp.113-122
• /
• 2005

We consider the iterative schemes for the large sparse linear system to solve partial differential equations. Using spectral radius of iteration matrices, the optimal relaxation parameters and good parameters can be obtained. With those parameters we compare the effectiveness of the SOR and SSOR algorithms. Applying Crank-Nicolson approximation, we observe the error distribution according to domain decomposition. The number of processors due to domain decomposition affects time and error. Numerical experiments show that effectiveness of SOR and SSOR can be reversed as time size varies, which is not the usual case. Finally, these phenomena suggest conjectures about equilibrium time grid for SOR and SSOR.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2932-2943
• /
• 1994

An efficient approach to the automatic construction of effective quadrilateral finite element meshes for two-dimensional analysis is presented. The procedure is composed of, firstly, an initial mesh generation and, secondly, an h-version of adaptive refinement based on error analysis. As for an initial mesh generation scheme, a modified looping algorithm has been employed. For the adaptive refinement process, an error indicator obtained by computing the residual error of the equilibrium equations in the energy norm with a relaxation factor has been employed. Examples of mesh generation and self-adaptive mesh improvements are given. These example solutions demonstrate that an effective mesh for a given error tolerance can be obtained in a few steps of the analysis processes.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2552-2559
• /
• 2000

Most of ferrous b.c.c weld materials have martensitic transformation during rapid cooling after welding. It is well known that volume expansion due to the phase transformation could influence on the relaxation of welding residual stress. To apply this effect practically, it is necessary to establish a numerical model which is able to estimate the effect of phase transformation on residual stress relaxation quantitatively. For this purpose, the analysis is carried out in two regions, i.e., heating and cooling, because the variation of material properties following a phase transformation in cooling is different in comparison with the case in heating, even at the same temperature. The variation of material properties following phase transformation is considered by the adjustment of specific heat and thermal expansion coefficient, and the distribution of residual stress in analysis is compared with that of experiment by previous study. In this study, simplified numerical procedures considering phase transformation, which based on a commercial finite element package was established through comparing with the experimental data of residual stress distribution by other researcher. To consider the phase transformation effect on residual stress relaxation, the transition of mechanical and thermal property such as thermal expansion coefficient and specific heat capacity was found by try and error method in this analysis. In addition to, since the transformation temperature changes by the kind and control of alloying elements, the steel with many kinds of transformation temperature were selected and the effect of transformation on stress releasement was investigated by the numerical procedures considering phase transformation.

• 산업기술연구
• /
• 제21권A호
• /
• pp.147-153
• /
• 2001

This paper presents techniques for discovering rules with elastic patterns. Elastic patterns are useful for discovering rules from data sequences with different sampling rates. For fast discovery of rules whose heads and bodies are elastic patterns, we construct a suffix tree from succinct forms of data sequences. The suffix tree is a compact representation of rules, and is also used as an index structure for finding rules matched to a target head sequence. When matched rules cannot be found, the concept of rule relaxation is introduced. Using a cluster hierarchy and a relaxation error, we find the least relaxed rules that provide the most specific information on a target head sequence. Performance evaluation through extensive experiments reseals the effectiveness of the proposed approach.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권2호
• /
• pp.194-201
• /
• 2015

A frequency modulated ultra-wideband (FM-UWB) transmitter with a high-robust relaxation oscillator for subcarrier generation and a dual-path Ring VCO for RF FM is proposed, featuring low power and low complexity. A prototype 3.65-4.25 GHz FM-UWB transceiver employing the presented transmitter is fabricated in $0.18{\mu}m$ CMOS for short-range wireless data transmission. Experimental results show a bit error rate (BER) of $10^{-6}$ at a data rate of 12.5 kb/s with a communication distance of 60 cm is achieved and the power dissipation of 4.3 mW for the proposed transmitter is observed from a 1.8 V supply.

• 한국통신학회논문지
• /
• 제26권7A호
• /
• pp.1162-1169
• /
• 2001

유연 패턴은 시간 축으로 확장 및 수축할 수 있는 요소들의 순서화된 리스트이다. 유연 패턴은 서로 다른 샘플링 비율을 갖는 데이터 시퀀스들로부터 규칙들을 찾아내는데 유용하게 사용된다. 본 연구에서는 헤드(head: 규칙의 왼쪽 부분)와 바디(body: 규칙의 오른쪽 부분)가 모두 유연 패턴으로 구성된 규칙들을 신속하게 찾도록 하기 위하여 데이터 시퀀스로부터 서픽스 트리(suffix tree)를 구성한다. 이 서픽스 트리는 유연 규칙들의 압축된 표현이며, 타깃 헤드 시퀀스와 매치되는 규칙을 찾기 위한 인덱스 구조로서 사용된다. 만일, 매치되는 규칙을 찾을 수 없는 경우에는 규칙 완화(rule relaxation)의 개념을 이용한다. 클러스터 계층(cluster hierarchy)과 완화 오차(relaxation error)를 사용하여 타깃 헤드 시퀀스의 고유한 정보를 대부분 포함하고 있는 최소한으로 완화된 규칙을 찾는다. 다양한 실험을 통한 성능 평가를 통하여 제안한 기법의 우수성을 검증한다.