• 한국초전도ㆍ저온공학회논문지
• /
• 제22권4호
• /
• pp.62-66
• /
• 2020

We fabricated superconducting quantum interference devices (SQUIDs) based on Nb Josephson junctions, and characterized the key parameters of the SQUIDs. The SQUIDs are double relaxation oscillation SQUIDs (DROSs) having larger flux-to-voltage transfer coefficient than the standard DC-SQUIDs. SQUID sensors were fabricated by using Nb junction technology consisted of a DC magnetron sputtering and a conventional photolithography process. In multichannel SQUID systems for whole-head magnetoencephalography measurement with a helmet-type SQUID array, we need about 336 SQUID sensors for each system. In this paper, we fabricated a few hundred SQUID sensors, measured the critical current, flux modulation voltage and decided if each tested SQUID can be used for the multichannel systems. As the criterion for the acceptance of the sensors, we chose the critical current and amplitude of the modulation voltage to be 8 ㎂ and 80 ㎶, respectively. The average critical current of the SQUIDs was 10.58 ㎂. The typical flux noise of the SQUIDs with input coil shorted was 2 μΦ0/√Hz at white region.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2005년도 ISMP
• /
• pp.201-212
• /
• 2005

[ $Epoxy/BaTiO_3$ ] composite embedded capacitor films (ECFs) were newly designed fur high dielectric constant and low tolerance (less than ${\pm}15\%$) embedded capacitor fabrication for organic substrates. In terms of material formulation, ECFs are composed of specially formulated epoxy resin and latent curing agent, and in terms of coating process, a comma roll coating method is used for uniform film thickness in large area. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ composite ECF is measured with MIM capacitor at 100 kHz using LCR meter. Dielectric constant of $BaTiO_3$ ECF is bigger than that of $SrTiO_3$ ECF, and it is due to difference of permittivity of $BaTiO_3\;and\;SrTiO_3$ particles. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ ECF in high frequency range $(0.5\~10GHz)$ is measured using cavity resonance method. In order to estimate dielectric constant, the reflection coefficient is measured with a network analyzer. Dielectric constant is calculated by observing the frequencies of the resonant cavity modes. About both powders, calculated dielectric constants in this frequency range are about 3/4 of the dielectric constants at 1 MHz. This difference is due to the decrease of the dielectric constant of epoxy matrix. For $BaTiO_3$ ECF, there is the dielectric relaxation at $5\~9GHz$. It is due to changing of polarization mode of $BaTiO_3$ powder. In the case of $SrTiO_3$ ECF, there is no relaxation up to 10GHz. Alternative material for embedded capacitor fabrication is $epoxy/BaTiO_3$ composite embedded capacitor paste (ECP). It uses similar materials formulation like ECF and a screen printing method for film coating. The screen printing method has the advantage of forming capacitor partially in desired part. But the screen printing makes surface irregularity during mask peel-off, Surface flatness is significantly improved by adding some additives and by applying pressure during curing. As a result, dielectric layer with improved thickness uniformity is successfully demonstrated. Using $epoxy/BaTiO_3$ composite ECP, dielectric constant of 63 and specific capacitance of 5.1nF/cm2 were achieved.

• 공업화학
• /
• 제10권6호
• /
• pp.876-880
• /
• 1999

이온성과 비이온성계면활성제의 혼합 미셀 용액의 자기확산계수는 NMR FT-PGSE법으로 측정하였다. 또한 프로톤 NMR 피크의 폭을 관찰하였다. 연구된 계는 $C_{12}EO_5/SDS/D_2O$, $C_{12}EO_5/DTAC/D_2O$ 및 $C_{12}EO_8/SDS/D_2O$의 혼합계이다. 모든 시료에서 솔벤트와 계면활성제의 몰비는 일정하고 계면활성제의 혼합비는 다양하게 실험을 하였다. $C_{12}EO_5$ 계에서 계면활성제의 자기확산계수는 이온성계면활성제의 혼합비가 약 25%일 때 최소치를 나타내었다. 비이온성계면활성제가 이온성계면활성제로 치환됨에 따라서 자기확산계수가 감소하는 것은 미셀간의 반발력이 증가하기 때문이다. 이온성계면활성제의 높은 분율에서 자기확산계수가 증가하는 것은 미셀의 크기가 감소하기 때문이다. $C_{12}EO_8$ 계에서 계면활성제의 혼합비의 효과는 분자의 기하학적 구조와 큰 관능기의 면적 때문에 거의 없다. 프로톤 NMR 피크와 자기확산계수는 상호 밀접한 관계를 나타내고 알킬 사슬의 메틸렌 시그날의 넓혀짐 현상은 자기확산계수가 작을 때 나타난다.

• 대한화학회지
• /
• 제52권3호
• /
• pp.217-222
• /
• 2008

본 논문에서는 반응 매질의 부피가 촉매 반응 속도에 미치는 영향을 조사하였다. 단순하지만 정확한 모델에 대한 연구로부터 촉매 반응의 반응 속도 계수는 매질의 부피가 줄어들 수록 증가함을 알게 되었다. 평균 반응속도 상수(average reaction rate constant)는 Collins-Kimball 속도 상수의 일반화 된 형태로 얻어졌는데, 속도 상수는 부피의 효과를 보정해주는 인자를 포함하고 있다. 조사한 모델의 반응물 농도는 전통적 화학 반응론에서 예측되는 지수함수적 감소와는 상당한 차이를 보이는데 이는 기존 화학 반응속도론에서는 무시되는 반응분자 공간 분포의 비평형 확산운동(non-equilibrium diffusive dynamics)의 효과 때문이다. 반응 매질의 부피 가 유한한 점을 고려하면, 반응 시간이 충분히 오래 지났을 때, 기존의 확산지배 반응에서는 예측 되는 않는 지수 함수적 농도 감소가 얻어지는데, 그 속도 상수 역시 반응매질 크기에 의존한다.

• 보건교육건강증진학회지
• /
• 제18권3호
• /
• pp.117-131
• /
• 2001

This study was attempted to develope a highly reliable and valid tool which is useful to assess the Korean obese adolescents' stress and coping method. The data were collected from the total of 600 obese students from middle and high schools in Pusan. The author used a convenience sampling method. The data collection was done from March 2 to July 11, 1999. The analysis of the data was done with SPSS Win(10.0) for descriptive statistics and factor analysis. The preliminary tool was composed of 72 items(stress items: 34, coping method items: 38) with the five point Likert scale. Item analysis and inter consistency were calculated for reliability and validity through pre-test. The preliminary tool was analyzed for reliability and validity. Finally, the tool was of 65 items(stress items: 33, coping method items: 32). The results were as follows: 1. Cronbach Coefficient Alpha for the 33 items of stress was .9485 and the 32 items of coping method was .8534. 2. The factor analysis was done in order to confirm construction and the items were extracted Oblimin rotation and Maximum likelihood extraction method. 3. The factor analysis showed 6 factors in stress and 10 factors in coping method. These 6 factors of stress explained 62.4％ and 10 factors of coping method explained 57.4％. 4. Six factor of stress lable were 〈outward appearance〉, 〈boyfriend/ girlfriend〉, 〈occur an outbreak of disease〉, 〈mutual relation of family〉, 〈an obese figure〉, 〈be a burden on exercise〉. 5. Ten factor of coping method lable were 〈be concerned about another affairs〉, 〈recreation activities〉, 〈self-violence〉, 〈relaxation〉, 〈hobby activities〉, 〈avoid a situation〉, 〈communication〉, 〈music〉, 〈negative behavior〉, 〈positive thinking〉. The results of using this scale in a study will contribute to design an appropriate school health management of obese students, and also it will contribute to the development of nursing research.

• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.197-209
• /
• 2018

본 논문은 터널 설계 시 설계 인자에 따른 콘크리트 라이닝 절근량 절감에 관한 연구 이다. 콘크리트 라이닝의 설계는 과다한 하중적용에 따라 철근보강이 증가하게 되며, 경제성이 줄어들게 된다. 터널 시공의 경제성을 향상시키기 위해서는 콘크리트 라이닝의 설계인자에 대해 합리적인 기준이 필요하다. 따라서 본 연구에서는 콘크리트 라이닝의 설계에 적용되는 설계 인자에 대하여 특징 및 문제점을 분석하였다. 또한 설계인자 적용에 대한 콘크리트 라이닝의 경제성 검토는 수치해석을 이용하여 단면설계를 통해 산정된 철근 보강량을 비교하였다. 분석 결과에 의하면 콘크리트 라이닝 설계 시 설계 인자의 적용에 따라 필요 철근량이 다르게 나타났다. 따라서 이 연구를 통하여 콘크리트라이닝의 철근량을 경감시킬 수 있는 것으로 나타났다. 이 연구 결과는 향후 콘크리트 라이닝의 경제적 설계를 위하여 유용하게 활용될 수 있을 것으로 판단된다.

• 설비공학논문집
• /
• 제6권4호
• /
• pp.365-379
• /
• 1994

Pool boiling experiments were carried out to study the effect of electric field on nucleate boiling heat transfer. CFC-11 and its alternative HCFC-123 were used as working fluids. Boiling on both single tube and a bundle of five tubes was investigated. Heat flux varied from 5 to $25kW/m^2$ while the applied voltage changed from 0 to 1kV. The results showed that at low heat flux where boiling was not present or very weak, electric field-induced forced convection helped increase the heat transfer coefficients of CFC-11 and HCFC-123 significantly(4-15 times increase). However, at higher heat flux, nucleate boiling of CFC-11 which is a highly dielectric fluid, was not affected significantly by the application of electric field. In contrast to CFC-11, even at high heat flux, nucleate boiling of CFC-11 which has a relatively larger electric conductivity than CFC-11, was vigorously increased up to 2-4 times. The additional power required to apply the electric field was 1-2% of the total power consumption by the heater. The increase in overall heat transfer coefficient of evaporators with HCFC -123 was about 40%, suggesting a considerable reduction in evaporator size with EHD technique.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.95-104
• /
• 2014

PURPOSES : The purpose of this study is to evaluate the degree of restraint (DOR) of longitudinal steel at continuously reinforced concrete pavement (CRCP) against environmental loadings. METHODS : To measure the longitudinal steel strain, 3-electrical resistance and self-temperature compensation gauges were installed to CRCP test section (thickness = 250mm, steel ratio = 0.7%) and continuously measured 10 min. intervals during 259 days. In order to properly analyze the steel strains first, temperature compensation process has been conducted. Secondly, measured steel strains were divided into 12 phases with different events such as before paving, during concrete hardening, and after first cracking, etc. RESULTS : Thermal strain rate (TSR) concept is defined as the linear strain variations with temperature changes and restraints rate of longitudinal steel against environmental loadings (especially thermal loading) with different cases is defined as degree of restraint(DOR). New concept of DOR could be indirect indicator of crack width behaviors of CRCP. CONCLUSIONS : Before paving, DOR of longitudinal steel is almost same at the coefficient of thermal expansion of steel ($12.44m/m/^{\circ}C$) because of no restraint boundary condition. After concrete pouring, DOR is gradually changed into -1 due to concrete stiffness developing with hydration. After first cracking at crack induced area, values of DOR are around -3~-5. The negative DOR stands for the crack width behavior instead of steel strain behavior. During winter season, DOR reached to -5.77 as the highest, but spring this values gradually reduced as -1.7 as the lowest. Based on this observation, we can presume crack width decreased over time within the time frame of this study. This finding is not consistent with the current theory on crack width variations over time, so further study is necessary to identify the causes of crack width reducing. One of the reasons could be related to concrete stress re-distribution and stress relaxation.

• 한국운동역학회지
• /
• 제27권4호
• /
• pp.279-285
• /
• 2017

Objective: The purpose of this study was to perform a muscle function path analysis of muscle function on myofascial meridians. Method: Seven male students (mean age: $22{\pm}3.46years$; mean mass: $72.71{\pm}8.19kg$; mean height: $174{\pm}4.39cm$) without a history of musculoskeletal system symptoms or injuries were recruited for this study. The measurement muscle of the myofascial line was selected along with the muscle presented in "anatomy trains (Thomas W. Myers. 2014)", and the attachment of the surface EMG (Telemyo 2400T G2, USA) pad was determined according to "EMG analysis (Kim Tae Wan et al., 2013)". The subjects underwent maximum volumetric contraction of their fascia line end muscles three times in lying and standing postures and were subjected to the maximum number of contractions of the myofascial line muscle three times in the lying and standing postures. The sampling rate of the EMG signal was set to 1,000 Hz, and the bandwidth was 20 to 350 Hz. The activity of each muscle was quantitated using the Pearson correlation coefficient, and SPSS 22.0 was used for data analysis. Results: In myofascial meridians, a positive correlation in the myofascial connection and a negative correlation in the mechanical connection were observed. Conclusion: Muscles that show significant contract correlations with one another may be expected to be used as an effective clinical marker in muscle strengthening or relaxation therapy, and rehabilitative training. In this study, the correlation of total myofascial meridians may differ without consideration of functional posture. Future studies need to consider these points.

• 성인간호학회지
• /
• 제13권2호
• /
• pp.317-326
• /
• 2001

The purpose of this study was to identify correlation of stress, coping patterns and physical symptoms in cancer patient's caregiver. The stress was measured by VAS(Visual Analogue Scale). The coping methods were measured using the modified Ways of Coping Questionnaire by Yang (1998) and the actual physical symptoms were investigated. The phases of patient illness consisted of 1st (initial) stage, and 2nd (recurred) stage and 3rd (terminal) stage based on literature (Lewandowski & Jones, 1988). The data were collected by a survey conducted from March to July, 2000 and which included 196 cancer patients' caregivers from two hospitals in Seoul. The data were analyzed using paired t-test, unpaired t-test, ANOVA, Scheffe test and Pearson correlation coefficient. The results were as follows: 1. The average of caregivers' stress scores was 62.5. Problem-focused coping methods were significantly used more than emotion-focused coping methods by the cancer patients' caregiver. The mean number of caregivers' physical symptom was 1.03. 2. There were significantly high level of stress in women, those who were more than 60 years old, those who had a low education level, those who had no job, those who are patients' wives' and those who are terminal patients' caregiver. There were significantly low levels of coping in women, those who were more than 60 years old, those who had low education levels, those who had no job and those who are patients' wives. There were significantly higher number of physical symptoms in women, and those who have no job. 3. Caregivers' stress was significantly correlated to problem-focused coping methods (r=-.21, p=.006), and physical symptom (r=-.28, p=.0001). In conclusion, attempts to develop nursing interventions for cancer patients' caregiver in women, those who are more than 60 years old, with a low education level, have no job, and are cancer patients' wives could have an improvement on positive coping methods and provide relaxation from stress in the patients' experience.