• Geomechanics and Engineering
• /
• v.22 no.6
• /
• pp.497-507
• /
• 2020

This paper presents the results of a three-dimensional numerical investigation into the effect of new tunnel construction on structural performance of existing tunnel lining. A three-dimensional finite difference model, capable of modelling the tunnel construction process, was adopted to perform a parametric study on the spatial variation of new tunnel location with respect to the existing tunnel with emphasis on the plan crossing angle of the new tunnel with respect to the existing tunnel and the vertical elevation of the new tunnel with respect to the existing one. The results of the analyses were arranged so that the effect of new tunnel construction on the lining member forces and stresses of the existing tunnel can be identified. The results indicate that when a new tunnel underpasses an existing tunnel, the new tunnel construction imposes greater impact on the existing tunnel lining when the two tunnels cross at an acute angle. Also shown are that the critical plan crossing angle of the new tunnel that would impose greater impact on the existing tunnel depends on the relative vertical location of the new tunnel with respect to the existing one, and that the overpassing new tunnel construction scenario is more critical than the underpassing scenario in view of the existing tunnel lining stability. Practical implications of the findings are discussed.

• Advances in biomechanics and applications
• /
• v.1 no.3
• /
• pp.211-225
• /
• 2014

The usual assumption that the increase of fractures in aging bone is due entirely to lower bone density is taken back with respect to the possibility that aging bone fractures result from a loss of stability, or buckling, in the structure of the bone lattice. Buckling is an instability mode that becomes likely in end-loaded structures when they become too slender and lose lateral support. The relative importance of bone density and architecture in etiology bone fractures are poorly understood and the need for improved mechanistic understanding of bone failure is at the core of important clinical problems such as osteoporosis, as well as basic biological issues such as bone formation and adaptation. These observations motivated the present work in which simplified adaptive-beam buckling model is formulated within the context of the adaptive elasticity (Cowin and Hegedus 1976, Hegedus and Cowin 1976). Our results indicate that bone loss activation process leads systematically to the apparition of new elastic instabilities that can conduct to bone-buckling mechanism of fracture.

• Geomechanics and Engineering
• /
• v.13 no.2
• /
• pp.255-267
• /
• 2017

Soft clay strata can suffer significant settlement or stability problems under building loads. Among the methods proposed to strengthen weak soils is the application of a stone masonry trench (SMT) beneath RC strip foundations (as a masonry pad-stone). Although, SMTs are frequently employed in engineering practice; however, the effectiveness of SMTs on the ultimate bearing capacity improvement of a strip footing rested on a weak clay stratum has not been investigated quantitatively, yet. Therefore, the expected increase of bearing capacity of strip footings reinforced with SMTs is of interest and needs to be evaluated. This study presents a two-dimensional numerical model using the discrete element method (DEM) to capture the ultimate load-bearing capacity of a strip footing on a soft clay reinforced with a SMT. The developed DEM model was then used to perform a parametric study to investigate the effects of SMT geometry and properties on the footing bearing capacity with and without the presence of surcharge. The dimensions of the SMTs were varied to determine the optimum trench relative depth. The study showed that inclusion of a SMT of optimum dimension in a soft clay can improve the bearing capacity of a strip footing up to a factor of 3.5.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.6
• /
• pp.632-643
• /
• 2012

Analysis of wind resources in Planetary Boundary Layer (PBL) using long term observation of tall tower located near coast line of the Korean Peninsula were carried out. The data observed at Pohang, Gunsan and Jinhae are wind, temperature and relative humidity with 10 minute interval for one year from 1 October 2010. Vertical turbulence intensity and its deviation at Pohang site is smaller than those of other sites, and momentum flux estimated at 6 vertical layers tend to show small difference in Pohang site in comparison with other sites. The change of friction velocity with atmospheric stability in Pohang is also not so great. These analysis indicate the mechanical forcing due to geographical element of upwind side is more predominant than thermal forcing. On the other hand, wind resources at Gunsan and Jinhae are mainly controlled by thermal forcing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.362-366
• /
• 2006

OLEDs(Organic Light Emitting Diodes) are attractive as alternative display components because of their relative merits of being self-emitting, having large intrinsic viewing angle and fast switching speed. But because of their relatively short history of development, much remains to be studied in terms of their basic device physics and design, manufacturing techniques, stability and so on. We investigated electrical properties of N, N-diphenyl-N, N bis (3-methyphenyl-l,1'-biphenyl-4,4'-diamine (TPD) and tris-8-hydroxyquinoline aluminum$(Alq_3)$ when their thicknesses were changed variedly from 3:7 to 5:5 of their thickness ratios. And we also studied properties of OLED depend on their deposition rate between $0.05{\sim}0.2$ nm/s.

• YAKHAK HOEJI
• /
• v.53 no.1
• /
• pp.34-40
• /
• 2009

The glycosylation of therapeutic glycoproteins can affect their efficacy, stability, solubility, and half-life. Analyzing the composition of monosaccharides, such as that of neutral and amino sugars, is the first step for elucidating the structure of glycan attached to glycoproteins. In the present study, neutral and amino sugars of lectin obtained from Maackia fauriei were analyzed using an enzyme-linked lectinsorbent assay (ELLA) and high-performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Peroxidase-labeled lectins such as concanavalin A, Ricinus communis agglutinin, and soybean agglutinin were used for ELLA, since they specifically bind to the monosaccharide residue most frequently encountered in a glycan. The hydrosylate of lectin was prepared by treatment with trifluoroacetic acid, which resulted in the lectin mainly possessing the N-glycan consisting of 98.1 pmol Fuc, 342.1 pmol GlcN, 51.9 pmol Gal, 678.9 pmol Man, and 330.7 pmol Xyl. The present results demonstrate that ELLA and HPAEC-PAD are very effective methods for rapidly estimating the types and relative amounts of monosaccharides in intact glycoproteins.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1825-1831
• /
• 2014

Grignard metathesis polymerizations of 1,1-disubstituted-2,5-dibromo-3,4-diphenylsiloles such as 1,1-dimethyl-2,5-dibromo-3,4-diphenylsilole, 1,1-diethyl-2,5-dibromo-3,4-diphenylsilole, 1,1-diisopropyl-2,5-dibromo-3,4-diphenylsilole, and 1,1-dihexyl-2,5-dibromo-3,4-diphenylsilole were performed to yield poly(1,1-disubstituted-3,4-diphenyl-2,5-silole)s containing fluorescent aromatic chromophore groups such as phenyl and silole in the polymer main chain: poly(1,1-dimethyl-3,4-diphenyl-2,5-silole), poly(1,1-diethyl-3,4-diphenyl-2,5-silole), poly(1,1-diisopropyl-3,4-diphenyl-2,5-silole), and poly(1,1-dihexyl-3,4-diphenyl-2,5-silole), respectively. The obtained materials are highly soluble in common organic solvents such as chloroform and tetrahydrofuran. Fourier-transform infrared spectra of all the polymers have characteristic C=C stretching frequencies at $1620-1628cm^{-1}$. The prepared organosilicon polymers exhibit strong absorption maximum peaks at 273-293 nm in the tetrahydrofuran solution, showing a red-shift of 18-34 nm relative to those of the monomer, strong excitation maximum peaks at 276-303 nm, and strong fluorescence emission maximum bands at 350-440 nm. Thermogravimetric analysis shows that most of the polymers are stable up to $200^{\circ}C$ with a weight loss of 6-16% in nitrogen.

• Acta Via Serica
• /
• v.1 no.1
• /
• pp.119-135
• /
• 2016

The initial phase of the Mongol invasion resulted in the establishment of relative political stability in the vast expanses of Eurasia, which came under the control of a single political entity - the Mongol realm. This contributed to a fairly rapid restoration of the commercial links and trade routes between the East and the West. During this period, Chinese silk again became available in large quantities in the Western markets. At the same time, the beginning of silk production and manufacturing of silk fabrics in Italy and the fashion flash for these goods in Western countries affected trade between Europe and the Muslim world. The centers of silk production in the Ilkhanid Empire were some provinces of Azerbaijan and Persia, where from it was exported in large numbers along the trade routes of Anatolia and Syria to the Mediterranean ports and further to the west. There are numerous testimonies of European travelers, and Muslim authors related the international silk trade in 13th-15th centuries, ie in the era from the Mongol Ilkhanid Empire till the reign of the Turkman Aqqoyunlu dynasty. One of the most informative documentary sources on this issue are the legislative codes (kanuname) of sultan Uzun Hasan from the Aqqoyunlu dynasty regarding the eastern provinces of the Asia Minor. This article presents and analyzes the information from these documents concerning the whole range of goods related to silk and silk fabrics trade in the period under the consideration.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.558-562
• /
• 2005

Crystallization of SAPO-5 and SAPO-34 molecular sieves with microwave and conventional electric heating of the same gel has been investigated in an alkaline condition using N,N,N’N’tetraethylethylenediamine as a template molecule. SAPO-5 structure can be selectively prepared with microwave heating because of the fast crystallization of the technique. On the other hand, SAPO-34 is the sole product with usual conventional electric heating because SAPO-5 can be gradually transformed into SAPO-34 structure with an increase in crystallization time. This phase selectivity is probably because of the relative stability of the two phases at the reaction conditions (kinetic effect). Crystallization with microwave heating can be suggested as a phase selective synthesis method for relatively unstable materials because of fast crystallization.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.3
• /
• pp.245-250
• /
• 2009

Crosslinked membrane based on sulfonated polyimide was prepared by the introduction of crosslinkable monomer in polymerization process and crosslinking during membrane casting. Crosslinked membranes showed different properties from non-crosslinked membranes. Crosslinking decreased methanol crossover and therefore unit cell using crosslinked membrane showed increased open circuit voltage, 0.81 V, in comparison with unit cell using noncrosslinked membrane, 0.71 V. In addition, water uptake of crosslinked membrane, 40.5%, was lower than that of non-crosslinked membrane, 57.0%, and this resulted in improved dimensional stability. However, proton conductivity of crosslinked membranes showed rather low relative to non-crosslinked membrane due to reduced water uptake.