• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.1-10
• /
• 2005

An unstructured parallel overset mesh method has been developed for the simulation of unsteady flows around multiple bodies in relative motion. For this purpose, an efficient and robust search method is proposed for the unstructured grid system. A new data-structure is also proposed to handle the variable number of data on parallel sub-domain boundary. The interpolation boundary is defined for data communication between grid systems. An interpolation method to retain second-order spatial accuracy and to treat the points inside the neighboring solid bodies are also suggested. A single store separating from the Eglin/Pylon configuration is calculated and the result is compared with experimental data for validation. Simulation of unsteady flows around multiple bodies in relative motion is also performed.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.2
• /
• pp.103-113
• /
• 2012

The ButterStar Observatory at the Dongducheon High School has been working for photographic observations of the Sun since October 16, 2002. In this study, we observed the Sun at the ButterStar observatory for 3,364 days from October 16, 2002 to December 31, 2011, and analyzed the photographic sunspot data obtained in 1,965 days. The correction factor $K_b$ for the entire observing period is 0.9519, which is calculated using the linear least square method to the relationship between the daily sunspot number, $R_B$, and the daily international relative sunspot number, $R_i$. The yearly correction factor calculated for each year varies slightly from year to year and shows a trend to change along the solar cycle. The correction factor is larger during the solar maxima and smaller during the solar minima in general. This implies that the discrepancy between a relative sunspot number, R, and the daily international relative sunspot number, $R_i$, can be reduced by using a yearly correction factor. From 2002 to 2008 in solar cycle 23, 35.4% and 64.6% of sunspot groups and 35.1% and 64.9% of isolated sunspots in average occurred in the northern hemisphere and in the southern hemisphere, respectively, and from 2008 to 2011 in solar cycle 24, 61.3% and 38.7% of sunspot groups and 65.0% and 35.0% of isolated sunspots were observed, respectively. This result shows that the occurrence frequency for each type of sunspot group changes along the solar cycle development, which can be interpreted as the emerging and decaying process of sunspot groups is different depending on the phase of solar cycle. Therefore, it is considered that a following study would contribute to the efforts to understand the dependence of the dynamo mechanism on the phase of solar cycle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.12-22
• /
• 2016

Lidar-based hazard avoidance landing system for lunar lander calculates hazard cost with respect to the desired local landing area in order to identify hazard and designate safe landing point where the cost is minimum basically using slope and roughness of the landing area. In this case, if the parameters are only considered, chosen landing target can be designated near hazard threatening the lander. In order to solve this problem and select optimal safe landing point, hazard cost based on relative distance to hazard should not be considered as well as cost based on terrain parameters. In this paper, the effect of hazard cost based on relative distance to hazard on safe landing performance was analyzed and it was confirmed that landing site designation with two relative distances to hazard results in the best safe landing performance by an experiment using three-dimensional depth camera.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.267-274
• /
• 2009

Recently, UAVs (Unmanned Aerial Vehicles) are expected much as the Unmanned Systems for various missions. These missions are often based on the Vision System. Especially, missions such as surveillance and pursuit have a process which is carried on through the transmitted vision data from the UAV. In case of small UAVs, monocular vision is often used to consider weights and expenses. Research of missions performance using the monocular vision is continued but, actually, ground and target model have difference in distance from the UAV. So, 3D distance measurement is still incorrect. In this study, Mean-Shift Algorithm, Optical Flow and Subspace Method are posed to estimate the relative depth. Mean-Shift Algorithm is used for target tracking and determining Region of Interest (ROI). Optical Flow includes image motion information using pixel intensity. After that, Subspace Method computes the translation and rotation of image and estimates the relative depth. Finally, we present the results of this study using images obtained from the UAV experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.359-366
• /
• 2017

In this paper, aerodynamic data of the Gaori kite was constructed through the wind tunnel experiment taking into consideration all the angles of attack formed during the flight of the Gaori kite. From this aerodynamic data, we made a morphing analysis of the relative length of the front bridle to the rear bridle required to achieve equilibrium flight as the angle of attack of the Gaori kite or the azimuth angle change. As a result, it was found that the relative length of the front bridle to the rear bridle depends entirely on the chord length of the kite, the relative wind speed and changes morphed according to the angle of attack. Using this information data, one can adjust the relative length of the bridle line to suit the kite attitudes and flight environments handling the kites that maintain optimal flight performance.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.4
• /
• pp.226-231
• /
• 1992

This experiment was carried out to estimate the dry matter accumulation using growth analysis in spring growth of perennial ryegrass varieties grown under space planting conditions, based on the data of previous paper9'. The results obtained were as follows: 1. Growth parameters of leaf area ratio(LAR), specific leaf area(SLA) and leaf weight ratio(LWR) were recognized siginificant differences between varieties. But, specific leaf area(SLA), leaf weight ratio (LWR) and relative tiller appearance rate(RTAR) were recognized significant differences between growth stages. Specific leaf area(SLA) was significant difference for the interaction of variety Xgrowth stage. 2. The relative growth rate of biological yields(BYRGR) indicated significantly positive correlations with relative growth rate of shoot(RGR) and root(RWGR), and net assimilation rate(NAR) as affected by the varieties and growth stages. 3. The relative growth rate of biological yields(BYRGR) indicated significantly positive correlation with nct assimilation rate(NAR) in all varieties. Leaf area ratio(LAR) had significantly positive correlation with specific leaf area(SLA) in all varieties, but shows a significant negative correlation with leaf weight ratio(LWR) of Maprima variety. 4. The relative growth rate of biological yields(BYRGR) indicated significantly positive correlations with the absolute growth rates of yield components.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.105-116
• /
• 1999

Owing to the rapid development of computer system and the introduction of image processing technique, recent photogrammetric studies have been concentrated on the automation of photogrammetric orientation work that have been carried out by skilled professionals in analog and/or analytical pbotogrammetric field. To automate the whole photogrammetric work, the automation of the orientation processes including interior, relative and absolute orientation should be preceded. This study aims to automate interior orientation and relative orientation process. For this purpose, we applied Hough transform to interior orientation process and object space matching technique to relative orientation process. As the result of this study, we can present a method to automate interior and relative orientation process that has been semi-automatically operated in most commercial digital photogrammetric workstations currently available.

• Journal of the Korean Statistical Society
• /
• v.27 no.3
• /
• pp.251-264
• /
• 1998

When the LRT is not feasible, we define quasi-LRT(QLRT) as a modification of the LRT Under some appropriate conditions the QLRT shares Bahadur optimality and Bartlett Adjustability with the LRT. When we can find maximum likelihood estimator under the null parameter space but not under the unrestricted parameter space, our QLRT is Bahadur optimal as is the LRT We suggest the stopping rule of the Newton-Raphson iterations for constructing the QLRT statistics which are Bartlett adjustable.

• Bulletin of the Korean Space Science Society
• /
• 2009.04a
• /
• pp.31.2-31.2
• /
• 2009

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1397-1409
• /
• 2017

For text categorization task, distinctive text features selection is important due to feature space high dimensionality. It is important to decrease the feature space dimension to decrease processing time and increase accuracy. In the current study, for text categorization task, we introduce a novel statistical feature selection approach. This approach measures the term distribution in all collection documents, the term distribution in a certain category and the term distribution in a certain class relative to other classes. The proposed method results show its superiority over the traditional feature selection methods.