• 센서학회지
• /
• 제6권1호
• /
• pp.43-48
• /
• 1997

$Ca_{10}(PO_{4})_{6}(OH)_{2}$ 감습소자를 고상반응법을 이용하여 제조하고, 그의 감습특성을 조사하였다. 상대습도가 증가함에 따라 임피던스는 감소하며 $30{\sim}90\;%$의 습도영역에서 임피던스의 변화가 약 $10^{2}\;{\Omega}$ 정도로 우수한 감도를 보임을 알 수 있다. 또한 감습도는 주위 온도변화와 습기에의 장시간 노출에 안정된 특성을 나타내었다. 시편의 열처리에서도 감도의 변화가 없으며, 흡습 및 탈습에 따른 히스테리시스 특성은 거의 나타나지 않았다.

• 상하수도학회지
• /
• 제12권3호
• /
• pp.91-98
• /
• 1998

In this study, the hydrological changes due to urbanization were investigated and fundamental theory and characteristics of typical urban runoff model such as ILLUDAS was studied. Above model was applied for urbanizing Dongsucheon basin, Incheon. The main parameters (II, IA, IS) which are included in model depending on runoff results were determined, and dimensionless values such as total runoff ratio($Q_{TR}$), peak runoff ratio($Q_{PR}$), and runoff sensitivity ratio ($Q_{SR}=Q_{TR}/Q_{PR}$) were estimated in order to evaluate and compare the characteristics of model based on relative sensitivity analysis.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.1052-1059
• /
• 2008

Sequential Sensitivity Analysis (SSA) and conditional stimulus model have been developed to describe sequence effects in difference tests and proposed to generate prediction of differences in sensitivity between various test protocols and to assist the appropriate selection of difference test. Yet, such models did not furnish a complete explanation of the relative sensitivity in 4 different versions of 3-alternative forced choice (AFC) tests where various interstimulus rinses were introduced. In the present study, the vector of the contrasts between various conditional stimuli were measured using same-different and 2-AFC and a new 16-distribution conditional stimulus model was developed by refining Lee and O'Mahony's contrast model. This new model gave superior predictions than previous models.

• Journal of Microbiology and Biotechnology
• /
• 제20권2호
• /
• pp.287-293
• /
• 2010

Reliable discrimination of a single nucleotide mismatch was demonstrated using arrays with peptide nucleic acid (PNA) probes. The newly developed PNA probes immobilization method and hybridization conditions for PNA arrays gave excellent specificity and sensitivity. In addition we compared the specificity, sensitivity, and stability obtained with the PNA and DNA arrays in discriminating single nucleotide mismatches. The PNA arrays had superior perfect match-to-mismatch signal ratios and sensitivities. The relative signal intensities of mismatch PNA probes ranged from 1.6% to 12.1% of the perfect-match PNA probes. These results demonstrated that the PNA arrays were 2.0 to 37.3 times more specific and about 10 times more sensitive than DNA arrays. The PNA array showed the same specificity and sensitivity after 12-month storage at room temperature.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권3호
• /
• pp.165-171
• /
• 2000

Experiments were carried out to measure variations in the oxidation potential and current density using the polarization curves of polycarbonate. The results were then examined to identify the influences affecting the oxidation potential related to various conditions, such as temperature, pH, and oxydase(citrate and lipase). The lines representing the active anodic and cathodic dissolution shifted only slightly in the potential direction relative to temperature, pH, and the effect of the enzyme. The Tafel slope for the anodic and cathodic dissolution was determined such that the reversibility polarization was indicated as being effected by various conditions. The slope of the polarization curves describing the active-to-passive transition region shifted noticeably in their direction. Also, by varying the conditions, the optimum conditions for the most ready transform were identified, including temperature, pH, oxidation rate, and resistance of oxidation potential. The critical oxidation sensitivity(I(sub)r/I(sub)f) of the anodic current density peak and maximum passive current density was also determined, which is used in measuring the critical corrosion sensitivity of a polycarbonate.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.257-260
• /
• 1999

It is very important to design the shape of container in HIPing process since the final shape and relative density distribution of the product are decisively dependent on the shape of container. A derivative based approach to determine the shape of container in HIPing process is presented. In this approach the optimal design problem is formulated on the basis of the finite element process. The process model the formulation for process optimal design and the schemes for the evaluation of the design sensitivity and an iterative procedure for optimization are described. In comparison with finite difference scheme the validity of the schemes for the evaluation of the design sensitivity is examined.

• 상하수도학회지
• /
• 제13권2호
• /
• pp.74-81
• /
• 1999

In this study, the hydrological changes due to urbanization were investigated and fundamental theory and characteristics of typical urban runoff model such as CHICAGO Model was studied. Above model was applied for urbanizing Dongsucheon basin, Incheon. The main parameters(CI, CP, CS) which are included in this model depending on runoff results were determined, and dimensionless values such as total runoff ratio($Q_{TR}$), peak runoff ratio($Q_{PR}$), and runoff sensitivity ratio($Q_{SR}=Q_{TR}/Q_{PR}$) were estimated in order to evaluate and compare the characteristics of model based on relative sensitivity analysis. Finally, applied model was proposed based on understanding of work types and established urban runoff models which can simulate well for areal development patterns and urban river basin.

• International journal of advanced smart convergence
• /
• 제2권1호
• /
• pp.21-23
• /
• 2013

The antenna pattern in this case has a main beam pointed in the desired signal direction, and has a null in the direction of the interference.The conventional antenna pattern concepts of beam width, side lobes, and main beams are not used, as the antenna weights are designed to achieve a set performance criterion such as maximization of the output SNR.A new direction of arrival estimation method using effects of model errors and sensitivity analysis is proposed. Two subspaces are used to form a signal space whose phase shift between the reference signal and its effects of model error signal. Through simulation, the performance showed that the proposed method leads to increased resolution and improved accuracy of DOA estimation relative to those achieved with existing method. Since a desired signal is obtained after interference rejection through correction effects of model error, the effect of channel interference on the estimation is significantly reduced.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.1285-1289
• /
• 2004

Elman Discrete Recurrent Neural Networks Model(EDRNNM) was used to be a suitable short-term hydrological forecasting tool yielding a very high degree of flood stage forecasting accuracy at Musung station of Wi-stream one of IHP representative basins in South Korea. A relative new approach method has recurrent feedback nodes and virtual small memory in the structure. EDRNNM was trained by using two algorithms, namely, LMBP and RBP The model parameters, optimal connection weights and biases, were estimated during training procedure. They were applied to evaluate model validation. Sensitivity analysis test was also performed to account for the uncertainty of input nodes information. The sensitivity analysis approach could suggest a reduction of one from five initially chosen input nodes. Because the uncertainty of input nodes information always result in uncertainty in model results, it can help to reduce the uncertainty of EDRNNM application and management in small catchment.

• 대한기계학회논문집
• /
• 제17권11호
• /
• pp.2655-2663
• /
• 1993

In order to evaluate the relative significance of tolerance management of various elements in a VHS VTR tape transport system, the effect of geometric variations of the elements from standard design values on the tape traveling path is studied. The tape is modeled as a string and each element in the tape transport system is modeled as a cylinder whose radius, position vector and orientation vector are specified. An numerical algorithm is proposed to find the coordinates of tape entry points and tape exit points for the elements from which the tape traveling path can be completely described. By using the suggested algorithm, an error sensitivity analysis of tape traveling path due to the geometric variations of tape transport elements is performed for a particular model in the market and the elements demanding relatively strict tolerance management are identified.