• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.5
• /
• pp.101-108
• /
• 2019

The domestic duck industry is the sixth-largest among the livestock industries. However, 34.3% of duck houses were the duck houses arbitrarily converted from plastic greenhouses. This type of duck house was difficult to properly manage internal air temperature and humidity environment. Humidity environment inside duck houses is an important factor that directly affects the productivity and disease occurrence of the duck. Although the humidity environments of litters (bedding materials) affect directly the inside environment of duck houses, there are only few studies related to humidity environment of litters. In this study, evaporation rates from litters were evaluated according to air temperature, relative humidity, water contents of litters, and wind speed. The experimental chamber was made to measure evaporation rates from litters. Temperature and humidity controlled chamber was utilized during the conduct of the laboratory experiments. Using the measured data, a multi linear regression analysis was carried out to derive the calculation formula of evaporation rates from litters. In order to improve the accuracy of the multi linear regression model, the partial vapor pressure directly related to evaporation was also considered. Variance inflation factors of air temperature, relative humidity, partial vapor pressure, water contents of litters, and wind speed were calculated to identify multicollinearity problem. The Multiple $R^2$ and adjusted-$R^2$ of regression model were calculated at 0.76 and 0.71, respectively. Therefore, the regression models were developed in this study can be used to estimate evaporation rates from the litter of duck houses.

• KDI Journal of Economic Policy
• /
• v.12 no.1
• /
• pp.3-29
• /
• 1990

Korean input-output tables for 1975 and 1985 are first deflated into 1975 constant domestic prices(hypothetical terms), and the constant price I-O data are used to decompose the sources of industrial growth and structural change during the 1975-85 period. Using the same methodology, our results for the 1975-85 period are then linked to the results for the earlier period(1955-75) in order to analyze and evaluate the "demand-side" sources of industrialization over the past three decades. The results from the decomposition of the whole economy indicate that over three decades(1955-85) the relative contribution of domestic demand expansion (DDE) to growth and structural change has continuously declined while the contribution of export expansion(EE) has generally continued to rise. The contribution of import-substitution(IS) which had been significantly higher than that of EE during 1955-63 declined substantially, remaining at an insignificantly low level during the period following 1963. Although it is well known that the government's industrial policy in the 1970s emphasized import-substitution in heavy and chemical industries, no significant changes in the export-oriented growth pattern could be observed even for that period, except for a minor decline in the relative contribution of EE. This may be attributed to the substantially larger, backward-linkage effects of EE than that of IS. The sources-of-growth decompositions for major branches of the manufacturing sector generally support the major conclusions derived from the decomposition for the whole economy. The IS contribution which had been significantly high in almost all manufacturing branches during the 1955-63 period declined to low levels in all but two branches, heavy industry and machinery, during the following period. On the other hand, the relative contribution of EE showed a continuous rise in almost all manufacturing branches(except food processing). Finally, the sources of growth for 1975-85 which were decomposed by detailed sub branches, are analyzed by correlating them with changes in relative prices and industrial protection rates by sub-branches for the same period. A major result is that contrary to general expectations, the EE contributions by sub-branch are not negatively correlated with the nominal rates of protection and/or the effective rates of protection for the same sub-branches. It is also found that no statistically significant, positive correlation exists between IS contributions and nominal protection rates or effective protection rates. These unexpected results may be explained by the peculiar nature of the Korean system of industrial incentives for the past period.

• Tribology and Lubricants
• /
• v.14 no.2
• /
• pp.10-20
• /
• 1998

In this paper, the effects of material properties on the friction and wear behavior of pure metals are investigated. The sliding material pairs are selected based on their relative compatibility and relative hardness ratio of the specimen. The initial and steady-state friction coefficients are obtained in the experiments and the wear rates are quantitatively investigated. It is shown that the initial friction coefficient is affected by the hardness ratio of sliding materials. Furthermore, in steady state condition, neither hardness ratio nor compatibility has significant influence on the frictional behavior. As for wear, the ductility of the metal affects the wear particle generation process which in turn affects the frictional behavior. The findings of this research suggest that frictional interaction cannot be simply characterized by either compatibility or hardness ratio of the materials undergoing sliding contact.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2003

In this paper, we extend the derivation of the iterative soft-output Viterbi algorithm (SOVA) for partial response (PR) channels, and modify its decoding process such that it works consistently for arbitrary high code rates, e.g., rate 64/65. We show that the modified SOVA always outperforms the conventional SOVA that appears in the literature with a significant difference for high code rates. It also offers a significant cut down in the trace-back computations. We further examine its performance for parallel and serial concatenated codes on a precoded Class IC partial response (PR4) channel. Code rates of the form $\frac{k_0}{k_0+1}$($k_0$ = 4, 8, and 64) are considered. Our simulations indicate that the loss suffered by the modified SOVA, relative to the APP algorithm, is consistent for all code rates and is at most 1.2 dB for parallel concatenations and at most 1.6 dB for serial concatenations at $P_b$ = $10^{-5}$.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.181-185
• /
• 2008

In this study, we attempted to quantify the relative importance of assumptions regarding blood rheology. Three patient-specific carotid bifurcation geometries and time-varying flow rates were obtained using magnetic resonance imaging. For each subject, CFD simulations were carried out assuming two different non-Newtonian rheology models Carreau and Ballyk models) and rescaled Newtonian viscosities based on characteristic shear rates to account for the shear-thinning property of blood. The sensitivity of WSS and oscillatory shear index (OSI) were contextualized with respect to the reproducibility of the reconstructed geometry and to assumptions regarding the inlet boundary conditions. We conclude that the assumption of Newtonian fluid is reasonable for studies aimed at quantifying the distribution of WSS-based extrema in an image-based CFD model of carotid bifurcation.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.181-185
• /
• 2008

In this study, we attempted to quantify the relative importance of assumptions regarding blood rheology. Three patient-specific carotid bifurcation geometries and time-varying flow rates were obtained using magnetic resonance imaging. For each subject, CFD simulations were carried out assuming two different non-Newtonian rheology models (Carreau and Ballyk models) and rescaled Newtonian viscosities based on characteristic shear rates to account for the shear-thinning property of blood. The sensitivity of WSS and oscillatory shear index (OSI) were contextualized with respect to the reproducibility of the reconstructed geometry and to assumptions regarding the inlet boundary conditions. We conclude that the assumption of Newtonian fluid is reasonable for studies aimed at quantifying the distribution of WSS-based extrema in an image-based CFD model of carotid bifurcation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1290-1295
• /
• 1988

Theoretical considerations in the development of new cutting tool materials for high speed machining is presented. The progressive wear of cutting tools is assumed to consist of the abrasive and solution components as major modes. Theoretical calculations of relative wear rates between various tool materials based on the two modes are possible using their hardness and solubility data. Assuming cementite as the major hard particles in machining steels, relative wear rates of possible tool materials were calculated. The results indicate that $Al_{2}$O$_{3}$ in oxides, HfN in nitrides and HfC in carbides are the optimal tool materials from the view point of mechanical and thermochemical wear resistance. And several methods for improving the fracture toughness of the above tool materials are suggested.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1798-1806
• /
• 2020

In this study, we investigated whether there is a significant relationship between the natural radiation dose rate and the cancer incidences in Korea by using a big data analysis. The natural dose rate data for this analysis were the measurement data obtained from the 171 monitoring posts of the 113 administrative districts in Korea over the 10 years from 2007 to 2016. The relative cancer incidences for this analysis were the difference in the cancer patients per hundred thousand people year-on-year in the administrative districts with the five highest and the five lowest natural gamma dose rates each year over the same period. To analyze the correlation between the two variables, Spearman's rank correlation coefficient between the two rates was derived using R, a well-known big data analysis tool. The analysis showed that Spearman's rank correlation coefficient was more than 0.05 and that the correlation between the two variables was not statistically significant.

• Geotechnical Engineering
• /
• v.12 no.4
• /
• pp.101-114
• /
• 1996

In this study, the characteristics of bearing capacity and deformation of intermediate soils are investigated through centrifuge tests. The experimental parameters are footing width, initial stress condition of soils and relative loading rate defined relationship of loading rate and permeability of soils. It is examined that loading rate influences on the bearing capacities and deformations. Based on the test results, some problem of existing specification are introduced in the view of related loading rates and load intensities. Especially it is showed that load intensities magnitude rlre reversed in the same settlement ratio(s/B(%)), due to partial drained effect as well as loading rates in undrained con dition based on the excess pore pressure and deformations measured under loading.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.229-244
• /
• 1998

This study was performed to determine proper fan and heater management schemes for natural air drying of rough rice in round steel bin with stirring device under Korean weather conditions. A computer simulation model was developed to predict moisture content changes, energy requirements, and drymatter losses during drying of rough rice by natural air. Drying test was conducted to validate the simulation model using round steel bin of holding capacity of 300ton at Rice Processing Complex in Jincheon. The bin was filled with rough rice every day and mixing by stirring device. Moisture contents, ambient air temperatures, relative humidities, static pressures in plenum chamber in the bin, airflow rates, and electrical and fuel energy were measured. Relative errors of moisture content changes predicted by the simulation model were below 5ft, and relative errors of final moisture content, final grain weight, required energy ranged from 0.9% to 6%. These not levels indicated that the simulation model can satisfactorily predict the performance factors of natural air drying system such as drying rates and energr consumptions comparing error level of 10% to 15% in other drying simulation models generally used in dryer desists. Twelve different fan and heater management schemes were evaluated using the computer simulation model based on three hourly weather data from Suweon for the period of 1952-1994. The best management schemes were selected comparing the drymatter losses, required drying times, required energy consumptions. Operating fan without heating only when ambient relative humidity was below 85% or 90% appeared to be the most effective method of In operation in favorable drying weather. Under adverse drying climates or to reduce required drying time, operating fan continuously, and heating air with $1.5^{\circ}C$ temperature rise only when ambient relative humidity was over 85% appeared to be the most suitable method.