• 한국수소및신에너지학회논문집
• /
• 제24권2호
• /
• pp.107-112
• /
• 2013

The ZnO is able to produce hydrogen from water however it can only absorb ultraviolet region due to its 3.37eV of wide band gap. Therefore efficiency of solar hydrogen production is low. In this work we report investigation results of improved visible light photo-catalytic properties of CdSe quantum dots(QDs) sensitized ZnO nanorod heterostructures. Hydrothermally vertically grown ZnO nanorod arrays on FTO glass were sensitized with CdSe by using SILAR(successive ionic layer adsorption and reaction) method. Morphology of grown ZnO and CdSe sensitized ZnO nanorods had been investigated by FE-SEM that shows length of $2.0{\mu}m$, diameter of 120~150nm nanorod respectively. Photocatalytic measurements revealed that heterostructured samples show improved photocurrent density under the visible light illumination. Improved visible light performance of the heterostructures is resulting from narrow band gap of the CdSe and its favorable conduction band positions relative to potentials of ZnO band and water redox reaction.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.881-884
• /
• 2012

We report a quantum chemical study of an extremely efficient nucleophilic aromatic fluorination in molten salts. We describe that the mechanism involves solvent anion interacting with the ion pair nucleophile $M^+F^-$(M = Na, K, Rb, Cs) to accelerate the reaction. We show that our proposed mechanism may well explain the excellent efficiency of molten salts for SNAr reactions, the relative efficacy of the metal cations, and also the observed large difference in rate constants in two molten salts $(n-C_4H_9)_4N^+\;CX_3SO_3^-$, (X=H, F) with slightly different sidechain ($-CH_3$ vs. $-CF_3$).

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.73-78
• /
• 2008

A resistor network model for the horizontal AlInGaN LED was investigated, The parameters of the proposed model are extracted from the test dies and $350{\mu}m$ LED, The center of the P-area is the optimal position of a P-electrode by the simulation using the model. Also the optimal chip size of the LED for the new target current was investigated, Comparing the simulation and fabrication result, the errors for the forward voltage and the light power are average 0,02 V, 8 % respectively, So the proposed resistor network model with the linear forward voltage approximation and the exponential light power model are useful in the simulation for the horizontal AlInGaN LED.

• 대한화학회지
• /
• 제53권6호
• /
• pp.677-682
• /
• 2009

본 논문에서는 ZnS:Mn/ZnS 코어-쉘 양자점을 유기금속전구체의 열분해 방법으로 합성하였다. 쉘의 형성온도를 135$^{\circ}C$로 고정한 반면 코어 나노입자의 합성 온도 조건을 다양화 하여 각 조건하에서 형성된 양자점들의 특성을 조사하였다. 실험을 통해 얻은 양자점들은 UV-Vis, 액체 photoluminescence (PL) spectroscopy 방법으로 광 특성을 조사하였으며, 또한 XRD, HR-TEM, 및 EDXS 분석으로 입자크기와 조성 등을 측정하였다. 실험 결과 가장 좋은 광 특성을 보인 나노입자의 합성조건은 코어와 쉘 모두 135$^{\circ}C$인 것으로 밝혀 졌으며, 이 조건에서 얻은 양자점은 583 nm 의 PL 발광 피이크와 42.15%의 높은 양자효율을 나타내었다. HR-TEM 으로 측정한 ZnS:Mn/ZnS 양자점의 평균 입자크기는 지름이 약 4.0 - 5.4 nm 정도였으며, 특히 150$^{\circ}C$의 온도 조건에서는 타원형의 입자가 형성되는 것이 관찰되었다.

• Journal of the Optical Society of Korea
• /
• 제1권2호
• /
• pp.116-119
• /
• 1997

Highly quantum efficient and multi-color emissible polymer light emitting devices have been realized utilizing poly (1-dodecyloxy-4-methyl-1, 3-phenylene)(2, 5"-terthienylene)(hereafter, mPTTh polymer) as an emitting layer and tris(8-hydroxyquinoline) aluminum (Alq3) as an electron transport layer. A single layer EL device of mPTTh polymer emits orange-colored light. EL efficiency increases as the thickness of Alq3 layer increases, but the emission color becomes visually broad when the Alq3 layer thickness is greater than 30nm since the relative peak intensity of green EL from Alq3 layer grows. EL color is changed from orange to greenish orange as the thickness of Alq3 layer grows. EL color is changed from orange to greenish orange as the thickness of Alq3 layer increases. EL efficiency of the double layer device was greatly enhanced by 3000 times compared with that of a single layer device. Alq3 layer in device acts as a hole blocking electron transporting layer and an emitting layer as a function of the thickness of Alq3 layer.ayer.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.652-656
• /
• 2004

A new luminescent polymer, poly{1,4-phenylene-1,2-ethenediyl-2'-[2"-(4'"-octyloxyphenyl)-(5"-yl)-1",3",4"-oxadiazole]-1,4-phenylene-1,2-ethenediyl-2,5-bis-dodecyloxy-1,4-phenylene-1,2-ethenediyl} (Oxd-PPV), was synthesized by the Heck coupling reaction. Electron withdrawing pendant, conjugated 1,3,4-oxadiazole (Oxd), is on the vinylene unit. The band gap of the polymer figured out from the UV-visible spectrum was 2.23 eV and the polymer film shows bright yellow emission maximum at 552 nm. The electroluminescence (EL) maximum of double layer structured device (ITO/PEDOT:PSS/Oxd-PPV/Al) appeared at 553 nm. Relative PL quantum yield of Oxd-PPV film is 3.6 times higher than that of MEH-PPV film. The HOMO and LUMO energy levels of Oxd-PPV figured out from the cyclic voltammogram and the UV-visible spectrum are -5.32 and -3.09 eV, respectively, so that more balanced hole and electron injection efficiency can be expected compared to MEH-PPV. A double layer EL of Oxd-PPV has an maximum efficiency of 0.15 cd/A and maximum brightness of 464 cd/$m^2$.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.220-223
• /
• 2008

A camera system for the satellite application performs the mission of observation by measuring radiated light energy from the target on the earth. As a development stage of the system, the signal level analysis by estimating the number of electron collected in a pixel of an applied CCD is a basic tool for the performance analysis like SNR as well as the data path design of focal plane electronic. In this paper, two methods are presented for the calculation of the number of electrons for signal level analysis. One method is a quantitative assessment based on the CCD characteristics and design parameters of optical module of the system itself in which optical module works for concentrating the light energy onto the focal plane where CCD is located to convert light energy into electrical signal. The other method compares the design\ parameters of the system such as quantum efficiency, focal length and the aperture size of the optics in comparison with existing camera system in orbit. By this way, relative count of electrons to the existing camera system is estimated. The number of electrons, as signal level of the camera system, calculated by described methods is used to design input circuits of AD converter for interfacing the image signal coming from the CCD module in the focal plane electronics. This number is also used for the analysis of the signal level of the CCD output which is critical parameter to design data path between CCD and A/D converter. The FPE(Focal Plane Electronics) designer should decide whether the dividing-circuit is necessary or not between them from the analysis. If it is necessary, the optimized dividing factor of the level should be implemented. This paper describes the analysis of the electron count of a camera system for a satellite application and then of the signal level for the interface design between CCD and A/D converter using two methods. One is a quantitative assessment based on the design parameters of the camera system, the other method compares the design parameters in comparison with those of the existing camera system in orbit for relative counting of the electrons and the signal level estimation. Chapter 2 describes the radiometry of the camera system of a satellite application to show equations for electron counting, Chapter 3 describes a camera system briefly to explain the data flow of imagery information from CCD and Chapter 4 explains the two methods for the analysis of the number of electrons and the signal level. Then conclusion is made in chapter 5.

• 환경생물
• /
• 제30권3호
• /
• pp.210-218
• /
• 2012

일반적으로 많이 양식되는 방사무늬김(Porphyra yezoensis Ueda)에 대하여 방사무늬김 엽체의 형태적 특성, 탄소 및 질소 성분의 농도, 안정동위원소 비값, 광합성 효율을 방사무늬김 양식이 이루어 지고 있는 남서해역에서 조사를 하였다. 방사무늬김의 형태적 특성에 대해서 살펴보면 평균 엽장은 11.6~16.3 (13.8) cm, 평균 엽폭은 4.6~6.3 (5.4) cm이었고, 단위면적당 방사무늬김 엽체의 평균 엽중량은 $1.1{\sim}2.6(1.86)g\;DW\;m^{-2}$이었다. 단위면적당 Chl a 농도는 2.18~17.77 (평균 9.65) mg DW Chl a $m^{-2}$이었다. 방사무늬김의 탄소 농도는 $201{\sim}317(240)mg\;DW\;g^{-1}$이었고, 질소 농도는 $39.8{\sim}50.0(43.5)mg\;DW\;g^{-1}$이었으며, C/N비는 5.0~6.7 (5.5)이었다. 방사무늬김의 방사성 안정동위원소비 중에서 탄소 안정동위원소 비는 ${\delta}^{13}C$=-25.6‰ 에서 ${\delta}^{13}C$=-24.0‰ (평균 -24.7‰)의 값을 보였고, 질소 안정동위원소 비는 ${\delta}^{15}N$=1.3‰ 에서 ${\delta}^{15}N$=4.1‰ (평균 2.1‰)의 값을 보였다. PAM에 의한 해조류의 광합성 특성은 광합성 활동의 지시자로서 사용될 수 있다. 우리는 Diving-PAM을 이용하여 각 정점 해조류인 방사무늬김의 광합성율을 분석하였다. 최대양자수율은 0.46~0.55 (평균 0.52)로서 최대 양자수율의 변동은 정점간 큰 차이는 없었다. 최대상대전자전달률은 4.71~5.84 (평균 5.33) ${\mu}mol\;electrons\;m^{-2}\;s^{-1}$ 로서 최대양자수율과 비슷한 분포를 보였다. 기울기 (${\alpha}$)는 0.027~0.045 (평균 0.036)을 보였고, 전자전달을 위한 포화광은 지역에 따라서 일부 차이를 보였으나 $139{\sim}180(156){\mu}mol\;photons\;m^{-2}\;s^{-1}$이었다. 남서해역 방사무늬김 엽체의 탄소 및 질소 농도와 광합성 효율은 지역에 따른 큰 차이는 보이지 않았다. 광합성 특성은 낮은 최대양자수율과 최대 상대전자전달률로 인한 낮은 광합성 효율이 나타났다.

• 한국광학회지
• /
• 제23권2호
• /
• pp.64-70
• /
• 2012

c-plane 사파이어 기판에서 성장된 1 $mm^2$ 대면적 InGaN/GaN 다중양자우물 청색 발광 다이오드의 스트레스 전후의 전기적, 광학적 특성 변화를 분석하였다. 스트레스 실험은 샘플 칩을 TO-CAN에 패키징하여 50 mA의 전류를 200시간 동안 인가하여 수행하였다. 스트레스 인가 전류는 다이오드의 순전압 특성을 이용한 접합온도(junction temperature) 측정 실험을 통하여 충분히 낮은 접합온도를 유지하는 값으로 선택하였다. 이렇게 선택한 50 mA의 전류 인가량에서 접합온도는 약 308 K였다. 308 K의 접합온도는 접촉저항(ohmic contact) 또는 GaN계 물질의 특성 변화에 영향을 주지 않는다고 가정하고 실험을 진행하였다. 스트레스 전후에 전류-전압, 광량-전류, 표면 광분포, 파장 스펙트럼 및 상대적 외부양자효율 특성을 측정 및 분석하였다. 측정결과, 스트레스 후 저전류 구간에서의 광량이 감소하고 상대적 외부양자효율이 감소하는 현상을 관찰하였다. 우리는 이러한 현상이 결함의 증가로 인한 비발광 재결합률 증가로부터 기인함을 이론적으로 검토하고 실험결과의 분석을 통하여 보였다.

• 한국토양비료학회지
• /
• 제48권6호
• /
• pp.705-711
• /
• 2015

Management of soil water and fertilization is known to primarily affect physiological properties and yield in plant. The effect of soil water potential and nitrogen application on characteristics of photosynthesis and chlorophyll fluorescence in Schisandra chinensis Baillon was investigated on a sandy loam soil. Net photosyntheis rate and transpiration rate increased as a photon flux density and was highest at -50kPa of soil water potential. Light compensation point ($1.5{\mu}molm^{-1}s^{-1}$) and dark respiration ($0.13{\mu}molCO_2m^{-1}s^{-1}$) was lowest at -50 kPa but maximum photosynthesis rate ($13.10{\mu}molCO_2m^{-1}s^{-1}$) and net apparent quantum yield ($0.083{\mu}molCO_2m^{-1}s^{-1}$) was highest at -50 kPa. As results of chlorophyll fluorescence by OJIP analysis, maximum quantum yield (Fv/Fm) of photosystem II (PSII) and PIabs was higher in treatments of -50 kPa and -60 kPa respectively, which reflects the relative reduction state of PSII. But the relative activities per reaction center such as ABS/RC and DIo/RC were low with decreasing soil water potential. Net photosyntheis rate and transpiration rate were highest at treatment of soil testing 1.0 times ($92kgha^{-1}$). Application of nitrogen resulted in high Fv/Fm, $PI_{abs}$ and low ABS/RC, DIo/RC. This result implies that -50 kPa of soil water potential and nitrogen fertilizer may improve the efficiency of photosynthesis through controlling a photosystem in Schisandra chinensis Baillon.